Get Driverinformationsystem Guide for Skoda Fabia 4 Door Fourth Generation (2021-2026)

48 Driver information system › Analogue instrument cluster

If the heating is switched on with maximum heat

output, the heating power is automatically lowered

after 10 minutes.

Driver information system

Analogue instrument cluster

Overview

Overview of instrument cluster

Tachometer with indicator lights

Display

Speedometer with indicator lights

Bar with indicator lights

Multifunction button:

Setting the time

Reset odometer (trip)

Show distance and days until next service ap-

pointment

▶

Coolant temperature gauge

Fuel gauge

NOTICE

Risk of serious damage to the engine and the ex-

haust system!

Never run the fuel tank completely empty!

▶

In poor visibility and with dipped headlights oﬀ,

the brightness of the instrument cluster lighting is

reduced to remind the driver to turn on the light.

Display overview

Depending on the equipment, the following informa-

tion is shown in the display.

Segment display

Time

Selected gear/gear recommendation

Also included depending on vehicle equipment:

Driver information system › Analogue instrument cluster 49

Automatic gearbox selector lever positions

Operation via the multifunction steering wheel

▶

Menus, indicator lights

Outside temperature

Turn - Switch be-

tween menu

items/set values

Press - Conﬁrm the

menu item

Press - Return to the

menu one level high-

- low outside temperature

Selected driving data memory

1 - from the start

2 - long-term

3 - from refuelling

▶

Total distance travelled

Hold - Show main

Trip - Distance travelled after resetting the

memory

Information messages

Press - Show previous menu (if one has been se-

lected) / Show telephone menu

Fuel gauge

Settings

Time

Selected gear/gear

recommendation

Also included de-

pending on vehicle

equipment:

Setting the language

The language is set in the Infotainment in menu

Resetting the odometer

Brieﬂy press the button in the instrument

cluster.

›

Compass direction

display

▶

Automatic gearbox

selector lever posi-

tions

▶

Setting the time

MAXI DOT display

Press and hold the button in the instru-

ment cluster until the menu item Time is

›

Menu, indicator lights and information

displayed.

Outside temperature

Release the button, the display shows the hour set-

ting.

›

- low outside temperature

Total distance travelled

Press the button repeatedly to set the hours.

Wait 4 seconds, the display shows the minute set-

ting.

›

Trip - Distance travelled after resetting the

memory

Press the key repeatedly to set the minutes.

Wait 4 seconds, the display shows the initial set-

ting.

›

Overview of the main menu items

Driving data » page 50, Overview

Assist systems - Activate/deactivate assist sys-

tems

Navigation - e.g. Display driving recommendations,

compass, list of destination

▶

The time is also set in the Infotainment in menu

▶

Setting the brightness of the instrument cluster

lighting

The brightness of the instrument lighting is adjusted

automatically according to the given lighting condi-

tions.

Audio - Using radio and media

▶

Telephone - Call list, accept or reject an incoming

call

Vehicle - Vehicle condition » page 51, Display.

▶

When low beam is switched on, the brightness of

the instruments lighting can be adjusted in the fol-

lowing menu in the Infotainment system:

Operation

Operation via the control lever

Or:

Press - Switch be-

tween menu

items/set values

Hold - Show main

Press - Conﬁrm the

menu item

50 Driver information system › Driving data

Operation

Driving data

Overview

Display driving data in the display of the instru-

ment cluster via the operating lever

The driving data display works with the ignition

switched on.

Select the menu item for the driving data in the

main menu in the instrument cluster display.

›

In the instrument cluster display

Press - Select infor-

mation/Set values

Press - Conﬁrm in-

formation

Depending on the equipment, the display of the in-

strument cluster shows information such as speed,

fuel consumption, range, etc.

In Infotainment

Display driving data in the display of the instru-

ment cluster via the multi-functional steering

wheel

Select the menu item for the driving data in the

main menu in the instrument cluster display.

›

Rotate - Select in-

formation/Set values

Press - Conﬁrm in-

formation

Distance travelled

Driving time

Average speed

Average fuel consumption

Displaying driving data in the infotainment system

The driving data is displayed in the following menu in

the infotainment system:

Evaluation of driving economy - Drive-

GreenFunction (depending on Infotainment

type) » page 104

Menu item for driving data

Or:

Graphical fuel gauge - If the expected range is

less than 300 km, the vehicle slowly approaches

the symbol

Menu item for the driving data

Range

Select and reset the memory for driving data in

the display of the instrument cluster using the

control lever

Memory

The system saves the driving data in the following

memories:

To select the memory

›

for the displayed driv-

ing data, press button

A repeatedly.

From start or "1" (depending on display type)

Driving data from the time of switching on the ig-

nition until the ignition is switched oﬀ again is stor-

ed in the memory. If the journey is interrupted for

more than 2 hours, the memory will be reset.

▶

To reset the memory,

press and hold button

›

A .

Long term or "2" (depending on display type)

The driving data of all trips up to a total of 99

hours and 59 minutes driving time or 9999 km

driving distance is stored in the memory. If one of

the listed values is exceeded, the memory is reset.

▶

From refuelling or "3" (depending on display type)

Driving data from the time the fuel tank was last

ﬁlled is stored in the memory. The memory is reset

the next time the tank is ﬁlled.

▶

Driver information system › Speed limit warning 51

Select memory for driving data in the display of

the instrument cluster via the multifunction steer-

ing wheel and reset it

Settings

Setting the speed limit

Select Warning at or (depending on the display type)

and conﬁrm.

›

To select the memory

›

for the displayed driv-

ing data, press control

wheel A repeatedly.

When the vehicle is stationary, set the desired

speed limit and conﬁrm.

›

While driving, drive at the desired speed and con-

ﬁrm it as the speed limit.

›

To resetthe memory,

hold the dial A .

›

Resetting the speed limit

Select Warning at or (depending on the display type)

and conﬁrm.

›

To reset the speed limit, conﬁrm the stored value.

›

Selecting the memory in the infotainment system

To select the memory, use the functional areas

in the following menu in the infotainment system:

If the journey is interrupted for more than 2 hours,

the set limit is deactivated, but the set value remains

stored.

Menu item for driving data

Or:

Vehicle status

Display

Menu item for the driving data

Resetting the memory in the infotainment system

The memory is reset in the following menu in the in-

fotainment system:

The vehicle status is displayed in the following menu

in the infotainment system:

Menu item for the vehicle status

Or:

Menu item for the vehicle status

Settings

Select driving data to be displayed

The driving data to be displayed is selected in the

following Infotainment menu:

Or:

Vehicle areas displayed in colour indicate associ-

ated warnings

Setting units

The units are set in the following infotainment menu:

No notiﬁcation

Warning messages regarding the vehicle con-

dition and their quantity

Or:

Display of information about the condition

of the START-STOP system

▶

Activation/deactivation of information

regarding the messages of the START-STOP

system in another screen display

Speed limit warning

Usage

The system oﬀers the possibility to set a speed limit

beyond which an acoustic warning signal will sound

and the following warning message appears in the

display of the instrument cluster.

Functionality

In the event of a system fault, messages regarding

the fault in question are displayed on the instrument

cluster display when the ignition is switched on.

Driverinformationsystem for Your Skoda Fabia 4 Door Fourth Generation (2021-2026)

Related Topics

Popular Owner Manuals

Latest Owner Manuals