10.5
Satellite Navigation
How to Set the Navigation System ON and OFF
The screen shots shown in this manual may not exactly match the
screens on your navigation system. The images used are intended for
reference only.
1. Set the vehicle key to ignition position I or II.
2. Press NAV (LED ON) on the centre stack. The Infotainment
screen opens and the disclaimer is shown. Press ENTER to agree.
While the NAV button LED is ON the BACK, ENTER and JOYSTICK
functions only operate the navigation system. To use these functions
for Audio or Hands-Free phone functions either:
• Press the NAV button again (button LED OFF).
• Press any audio button other than BACK, ENTER and JOYSTICK.
Press NAV (button LED ON) again to return to navigation controls.
Pressing the AM/FM or MODE buttons will move the current
audio source.
The navigation system can be accessed if the ignition is set to OFF.
Always set the vehicle key to position 0 in the ignition control, and
remove the vehicle key when the system is not in use to prevent the
battery from discharging.
Navigation System OFF
At any time press and hold the NAV button until the system screen
starts to close.
Menu Navigation
[1] : Find a destination (Refer to ’Find a Location’, page 10.6)
[2] : View the map (Refer to ’Location Map’, page 10.7).
[3] : System settings (Refer to ’System Settings’, page 10.15).
[4] : System tools (Refer to ’Tools’, page 10.13)
English 
