Audi A1 2011 ➤ , Audi A1 Sportback 2018 ➤ , Audi A2 2001 ➤ , Audi A3 20 ...
Electrical Equipment General Information - Edition 08.2019
1.2
Smooth Hose Washer Fluid Line, Re‐
pairing
Note
Smooth hoses with a diameter of 5x1 mm or 6x1 mm can be re‐
placed with an EPDM (ethylene propylene diene monomer) hose.
Refer to the Parts Catalog.
– Trim and remove damaged sections of hose.
– Select the appropriate EPDM hose -2- and cable tie Parts
Catalog.
– Extend the EPDM hose -2- so that the smooth tube ends
-1 and 3- can each be inserted approximately 10 mm into
EPDM hose -2-.
– Secure with cable ties as illustrated -1-.
– Check for function and leaks.
1.3
Corrugated Hose Washer Fluid Line,
Repairing
Special tools and workshop equipment required
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
♦ Hot Air Blower - VAS5179- or
with respect to the correctness of information in this document. Copyright by AUDI AG.
♦ Wiring Harness Repair Set - Hot Air Blower - VAS1978/14A-
from the Wiring Harness Repair Set - VAS1978B-
♦ Hose Cutting Pliers - VAS6228-
Note
Corrugated hoses can be replaced with heat-shrink sleeves. Re‐
fer to the Parts Catalog.
1. Washer Fluid Hoses
81
English 
