document_0900452a81b1b9de.book Seite 256 Donnerstag, 26. Juli 2007 9:16 09
256
Checking and topping up fluids
Closing the bonnet
Engine compartment layout
– To close the bonnet, pull it down to overcome the spring
pressure.
Engine compartment layout
Main components for checking and refilling
– Then let it drop into the catches; do not press down ⇒
.
WARNING
• For safety reasons the bonnet must always be completely
closed when the vehicle is moving. After closing it always check
that it is properly secured. The bonnet must be flush with the adja-
cent body panels.
• Should you notice that the bonnet is not safely secured when
the vehicle is moving, stop the vehicle immediately and close the
bonnet properly, otherwise it could cause an accident.
Fig. 252 Typical locations of fluid containers, engine oil dipstick and engine oil
filler cap
1
A Jump-start terminal (+) under a cover . . . . . . . . . . . . . 265, 294
2
262
259
A Brake fluid reservoir () . . . . . . . . . . . . . . . . . . . . . . . .
3
A Engine oil filler cap () . . . . . . . . . . . . . . . . . . . . . . . .
4
A Engine oil dipstick* (orange) . . . . . . . . . . . . . . . . . . . . .
258
5
261
A Radiator expansion tank () . . . . . . . . . . . . . . . . . . . . .
6
265, 294
267
A Jump-start terminal (-) with hexagon head . . . . . . . . .
7
A Windscreen washer container () . . . . . . . . . . . . . . . .
8
225
A Hydraulic fluid reservoir for power steering . . . . . . . .
English 
