2016-2025 Audi A4 4 Door Customer information -> Data privacy User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Customer information -> Data privacy for Your Audi A4 4 Door Fifth Generation (2016-2025)

Driving information  
complete responsibility for safety in traffic. To  
reduce the risk of an accident, only use the lap  
timer functions in such a way that you always  
maintain complete control over your vehicle in  
all traffic situations.  
Tips  
A maximum of 99 lap times can be meas-  
ured.  
If timing is paused, you can continue it later  
even if you turn off the ignition.  
Saved lap times cannot be individually de-  
leted from the total results.  
Tips  
You can retrieve information from the trip  
computer while the lap timer stopwatch is  
running.  
The saved lap timer values will remain after  
turning off the ignition.  
Lap statistics  
Applies to: vehicles with lap timer  
Lap times and timing  
Applies to: vehicles with lap timer  
Displaying lap statistics  
Requirement: the lap timer must be open.  
You can display the number of laps driven , the  
fastest lap +, the slowest lap , and the average  
time in the instrument cluster.  
Timing laps  
To start timing manually, select Start lap 1 in  
the menu.  
Select in the instrument cluster: Vehicle func-  
To start timing automatically as soon as you be-  
tions tab > button > Lap statistics.  
gin to drive, select Start lap 1 by driving off or  
Start by driving off in the menu.  
Turn the thumbwheel down or up to display the  
individual lap times.  
To start timing a new lap after driving a lap, se-  
To return to the lap timing that was started, se-  
lect New lap in the menu. This starts timing  
lect the button > Lap times.  
the next lap at the same time.  
Resetting lap statistics  
After completing a lap, the difference between  
the last lap and the previous best lap time will be  
indicated with a or +.  
Requirement: the lap statistics menu must be  
displayed.  
To reset the lap statistics, press and hold the  
left thumbwheel until the message No lap  
times have been recorded yet. appears.  
Pausing timing and displaying a split time  
To take a break , select Pause in the menu.  
To resume timing, select Resume in the menu.  
To display a split time, select Split time in the  
Tips  
menu. The split time appears for approxi-  
mately ten seconds in the instrument cluster.  
The current lap timing will continue running.  
The lap statistics list the lap times for the last  
30 laps. The fastest and slowest lap times out  
of up to 99 measured laps are also displayed.  
Canceling lap timing  
Integrated Toll Module  
The timing of the current lap will stop. The lap  
time will be erased and will not be included in the  
statistics.  
Description  
Applies to: vehicles with Integrated Toll Module  
Select Cancel lap in the menu.  
Depending on the region, you can pay toll fees in  
certain countries using the Integrated Toll Mod-  
ule (ITM). It replaces a separate transponder for  
detecting toll fees. The system electronics are in-  
tegrated in the rearview mirror housing.  
Resetting the time  
Select Reset lap times in the menu.  
132  
Driving information  
To use the ITM in toll zones, you must register  
and activate it.  
the ITM is faulty. If the connection remains inter-  
rupted or the ITM is faulty, drive immediately to  
an authorized Audi dealer or authorized Audi  
Service Facility.  
Registration  
Applies to: MMI: Select on the home screen:  
VEHICLE > Settings & Service > Integrated Toll  
Module.  
Note the Integrated Toll Module ID.  
To register the ITM, go to the displayed web ad-  
dress and follow the instructions.  
Activation  
To activate the ITM, press in the MMI.  
Entering the number of passengers  
A lower toll fee may be charged depending on the  
number of passengers and the region. You must  
either enter the number of passengers or deacti-  
vate the ITM based on the laws applicable in the  
area where you are driving.  
To enter the number of passengers, select the  
appropriate button in the MMI.  
To deactivate the ITM, press in the MMI.  
Tips  
The driver is responsible for specifying the  
correct number of passengers and activat-  
ing or deactivating the ITM.  
Malfunctions can occur when detecting tolls  
if both the ITM and transponder are activat-  
ed. Deactivate the system not being used or  
remove it as necessary.  
If the rearview mirror is replaced, you must  
register the new ITM and remove the old  
ITM from the account.  
The system complies with United States FCC  
regulations and ISED regulations  
ðpage 301.  
Display  
Applies to: vehicles with Integrated Toll Module  
The selected number of passengers is displayed  
in the MMI status bar ðpage 24.  
The symbol in the status bar and a notifica-  
tion in the MMI will indicate if there is a faulty  
connection between the ITM and the MMI or if  
133  
Driver assistance  
Driver assistance  
WARNING  
Observe the safety precautions and note the  
limitations of the assist systems, sensors, and  
cameras ðpage 122 to ðpage 125.  
Cruise control system  
Description  
Applies to: vehicles with cruise control system  
The cruise control system assists you in main-  
taining a constant speed above approximately  
15 mph (20 km/h). The system maintains the de-  
sired speed by braking and accelerating.  
Turning on the system  
Applies to: vehicles with cruise control system  
WARNING  
Observe the safety precautions and note the  
limitations of the assist systems, sensors,  
and cameras ðpage 122 to ðpage 125.  
The cruise control system is only an assist  
system, and the driver is still responsible for  
operating the vehicle. The driver is especial-  
ly responsible for braking, controlling the  
speed, and maintaining the distance to oth-  
er vehicles.  
Fig. 108 Lever: turning on the system  
Requirement: the ignition must be turned on.  
To turn on the system, pull the lever toward  
Turn off the cruise control temporarily when  
driving in turning lanes, highway exits, or in  
construction zones. This prevents the vehi-  
cle from accelerating to the stored speed  
when in these situations.  
you to position 2 .  
WARNING  
Observe the safety precautions and note the  
limitations of the assist systems, sensors,  
and cameras ðpage 122 to ðpage 125.  
If the brakes are malfunctioning (for exam-  
ple, overheating) while the cruise control  
system is turned on, the regulating func-  
tions may shut off automatically.  
Note  
Before driving downhill a long distance on a  
steep hill, decrease your speed and select a  
lower gear. This makes use of the engine  
braking effect and reduces the load placed on  
the brakes.  
Preselecting or activating a cruise control  
speed  
Display overview  
Applies to: vehicles with cruise control system  
Applies to: vehicles with cruise control system  
When the vehicle is stationary, you can preselect  
the speed to be maintained, or you can select the  
speed while driving.  
Indicator lights and messages in the speedome-  
ter inform you about the driving situation and  
the settings. The displays depend on the country  
and equipment.  
Requirement: the system must be turned on.  
Indicator lights  
To preselect a cruise control speed when the ve-  
hicle is stationary, tap the lever toward + / -  
ðpage 134, fig. 108.  
To activate the cruise control speed, pull the  
 / - the cruise control system is turned  
on and actively controls the set speed.  
An additional indicator will appear in the head-up  
display*.  
lever toward position 2 while driving.  
134  

Related Topics

Popular Owner Manuals