Get Display and operation -> Voice recognition system Guide for Audi A4 4 Door Fifth Generation (2016-2025)

Touch display

Rotating

Applies to: touch display

Dragging away from/toward the edge of

the screen

Applies to: touch display

Fig. 13 Touch display: rotating

Fig. 15 Touch display: dragging away from the edge of the

screen

Rotating the view or perspective

►

Rotate the item using two fingers.

Opening hidden menus

The  symbol indicates that there is a hidden

menu.

Dragging

Applies to: touch display

►

Use your finger to drag inward from the upper

or lower edge of the screen, or

►

Press the  button.

Closing hidden menus

►

Press within the menu and drag it toward the

upper or lower edge of the screen.

Information about menu paths

Fig. 14 Touch display:

1

dragging with one finger,

2

dragging with two fingers

This guide shows you at a glance the paths for

opening a desired menu and its settings and

functions.

Scrolling or browsing through menus/lists

►

To scroll through menus and lists, swipe up-

Example of a path

ward or downward with one finger.

►

Applies to: MMI: Select on the home screen:

To browse through menus and lists, swipe to

SETTINGS > General > Date & time.

the right or left with one finger.

Following the path

Tilting 3D displays

►

First, determine in which display the path

Drag upward or downward with two fingers.

should be entered. In this example, it is the

MMI display.

►

To open the home screen, press .

►

If the SETTINGS button is not displayed, use

your finger to swipe to the left or right until it

appears.

►

Press the SETTINGS button.

►

If the General button is not displayed, swipe to-

ward the left or right with one finger until it ap-

pears.



21

Touch display

►

Press the General button.

If the Date & time button is not displayed,

swipe upward or downward with one finger un-

til it appears.

Press the Date & time button.

Turning on or off

►

Turning the MMI on or off

►

To turn off the MMI, press and hold the MMI

control knob ðpage 31, fig. 23 until all Info-

tainment functions are turned off.

To turn on the MMI, press the MMI control

knob.

►

Tips

If a menu or symbol is in parentheses in the

path, for example, (General) or (), then it is

an optional menu item that does not need to

be used in every system.

Restarting the MMI

►

Press and hold the MMI control knob for at

least 10 seconds.

Settings

Turning the center display on or off

►

To turn the center display on or off, press the

►

Applies to MMI: Select on the home screen:

 button in the center console in front of the

SETTINGS > Display & Brightness > MMI.

transmission selector, or

To turn off the center display, press  in the

Possible settings:

►

notification center ðpage 25.

To turn on the center display, touch the display

or press  again.

– Brightness

►

– Touchscreen feedback

Multi Media Interface

Introduction

Information about traffic safety

You can display and operate Infotainment system

and vehicle functions using the touch display in

the Multi Media Interface, abbreviated MMI.

Audi recommends only using certain Infotain-

ment system functions, such as entering a desti-

nation or pairing a mobile device, while the vehi-

cle is stationary. Be prepared to stop operating

the Infotainment system at any time in the inter-

est of your safety and the safety of other road

users.

Depending on the vehicle equipment, you may be

able to download other apps in addition to the

ones that are preinstalled ðpage 184.

Configuration wizard

After starting for the first time, the configuration

wizard helps you to set up the vehicle, for exam-

ple to set the desired system language and con-

nect a phone.

WARNING

– Only use the Infotainment system when

road, traffic, weather, and visibility condi-

tions permit and always in a way that allows

you to maintain complete control over your

vehicle.

►

Follow the instructions in the center display.

►

Applies to: MMI: To access the configuration

wizard at a later time, select on the home

screen: HELP > Configuration wizard.

– This also applies to operating your mobile

device via the MMI. Do not allow the visual

or audio signals from a mobile device to dis-

tract you from traffic, because this increases

the risk of an accident.

Tool tips

You can have tool tips displayed if necessary.

They introduce various MMI functions to you.

Tips

►

Applies to: MMI: To open the tool tips, select on

the home screen: HELP > Tool tips > Basic in-

formation or Expert information.

Certain functions are not available while driv-

ing.



22

Touch display

►

Follow the instructions in the display.

Applies to: MMI: Select on the home screen:

HELP > Owner's manual.

Online Owner's Manual

Applies to: vehicles with Online Owner's Manual

The Online Owner's Manual can be accessed di-

rectly from the Owner's Manual in the Infotain-

ment system ðpage 6.

Menus and symbols

Fig. 16 MMI: center display

Label

Overview screen

Description

Displays selected information tiles and provides quick access to

certain functions ðpage 24

1

Return to the home screen or the overview page, open menus

quickly ðpage 24

2

3

Quick access bar

Display area

Select a menu, apply settings, display content ðpage 24

Operate functions and apply quick settings ðpage 25, display

4 –

6

Status bar

of available notifications 5 ðpage 25, status indicator

ðpage 24, time

6

Description of common symbols

Symbol

Description

You can operate the standard functions using the

symbols listed. The symbols may be found in any

menu, depending on the context.



Open the submenu

Adjust the settings

Set as favorite

/

/

/

/

/



Symbol



Description

Turn functions on or off

Open additional actions

Go back one level

Close the menu





Search for content

Open explanations for a menu



Open additional information for

the selected menu

>

Open settings for the selected

menu



23

Touch display

►

Press Done to complete the configuration.

Overview screen

The overview screen is the first menu page in the

MMI. Information tiles display specific informa-

tion about certain vehicle functions, such as me-

dia. If you are logged in with your myAudi user,

the overview screen may contain personalized in-

formation depending on vehicle equipment, such

as recently used apps. The MMI will display and

arrange personalized information automatically.

Tips

The position of  cannot be adjusted.

Display area

You can change the location of the buttons and

folders on the home screen display area.

Configuring the display area

Configuring the overview screen

►

Press and hold a button on the home screen

►

Press and hold an information tile on the over-

display area.

view screen.

►

To adjust the placement of the buttons, pull

►

To change the position of an information tile,

them to the desired locations.

press and hold it and then slide it to the desired

position. Depending on vehicle equipment, the

layout of the overview screen can be custom-

ized.

►

To rename a folder, press on the folder name

and then enter the desired name.

►

Press Done to complete the configuration.

►

To replace an information tile, press  and se-

Switching between menu pages

lect the desired information tile.

Press Done to complete the configuration.

If a menu contains multiple menu pages,  is

displayed in the display area. The white bar

shows the location of the current menu page.

►

Opening the global text search

►

To switch between menu pages, swipe your fin-

ger to the right or left.

Depending on vehicle equipment, you can use the

global text search to search the MMI for key

words.

Status display

►

Open the overview screen and swipe your finger

to the right.

Quick access area

Using the quick access area, you can return to the

home screen and quickly switch between four

menus that can be configured according to your

preferences.

Fig. 17 Center display: frequently used symbols in the sta-

tus bar

Returning to the home screen or opening a

menu quickly

The symbols in the status bar show you informa-

tion at a glance, such as if a mobile device is con-

nected or if there is a data connection. The most

common symbols are listed in the table.

►

Press  or one of the four buttons.

Configuring the quick access area

►



Press and hold a button on the home screen

display area or in the quick access bar.

To move a button to the quick access bar, pull it

from the display area to the quick access bar.

To adjust the placement of the buttons in the

quick access bar, pull them to the desired posi-

tion in the bar.

24

Touch display

and a symbol for them will appear in the status

bar 5 ðpage 23, fig. 16. In the notification cen-

ter, you can view these notifications 3 ðfig. 18,

apply quick settings 2 , and operate functions

1 .

Description

There is a data connection. The bar indi-

cates the signal strength of the data con-

nection. Data is currently being transmit-

ted.

1

Depending on the vehicle equipment, system no-

tifications and connect app notifications will be

grouped and displayed in separate notification

lists 4 / 5 .

There is a data connection. The bar indi-

cates the signal strength of the data con-

nection. No data is being transmitted now.

2

3

A mobile device is connected. The bar indi-

cates the signal strength of the mobile

phone connection.

Using the notification center

►

To open the notification center, pull the status

4

5

There is no data connection.

bar downward, or

An error occurred with the mobile device

connection to the MMI.

►

Press the  button on the status bar.

►

To change the notification list, tap on the de-

A user is selected. If a question mark ap-

pears in the symbol , the guest user is ac-

tive.

sired button in the notification center 4 or 5 .

To turn quick settings on or off, press the re-

spective symbol 1 .

►

6

►

To apply quick settings, press the respective

symbol 2 .

To obtain additional information about a notifi-

cation, press it.

To delete a notification, pull it toward the right

edge of the screen.

7

8

A Bluetooth device is connected.

Bluetooth is turned on, but no Bluetooth

device is connected.

►

9

Audio playback was interrupted.

The audio source is muted.

►

10

►

Privacy settings are enabled. The additional

symbol indicates which privacy settings are

currently activated ðpage 293.

If there are more than four notifications in the

11

12

notification center, the older notifications will

be hidden. To display the older notifications,

drag your finger upward on the screen.

The Integrated Toll Module is turned on.

The numbers 1 - 3+ indicate how many pas-

sengers are selected in the MMI.

Selecting which content is displayed

For some system notifications, you can set if they

should be displayed.

Notification center

►

To set the displayed content, press , or

►

Applies to MMI: Select on the home screen:

SETTINGS > Notifications.

►

Select and confirm which notifications should

be displayed.

Operating functions

Depending on the vehicle equipment, the follow-

ing functions can be operated in area 1 :



Fig. 18 Center display: notification center

Notifications from the Audi system and Audi con-

nect apps can be displayed in the center display.

They will be hidden after a certain period of time

25

Display and operation -> Voice recognition system for Your Audi A4 4 Door Fifth Generation (2016-2025)

Related Topics

Popular Owner Manuals

Latest Owner Manuals