2016-2025 Audi A4 4 Door Starting and driving User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Starting and driving for Your Audi A4 4 Door Fifth Generation (2016-2025)

Voice recognition system  
Voice recognition system Description  
Operating the voice recognition system  
Applies to: vehicles with voice recognition system  
General information  
Applies to: vehicles with voice recognition system  
Various functions can be easily operated from the  
driver’s and front passenger's seat using voice  
commands.  
Using the voice recognition system optimally  
Speak clearly and distinctly at a normal volume.  
Speak louder when driving faster.  
Emphasize the words in the commands evenly  
Fig. 21 Center display: voice recognition system  
and do not leave long pauses.  
To reduce background noise, close all openings,  
such as doors and windows. Make sure that  
passengers are not speaking when you are giv-  
ing a voice command.  
Requirement: the ignition and the MMI must be  
turned on. A system language supported by the  
voice recognition system must be set. There must  
be no phone calls in progress and the parking aid  
must not be active.  
Do not direct the vents toward the hands-free  
microphone, which is in the roof headliner near  
the front interior lights.  
Operating by button  
Briefly press the button on the multifunction  
steering wheel, or depending on the context,  
press in the center display.  
WARNING  
Direct your full attention to driving. As the  
driver, you have complete responsibility for  
safety in traffic. Only use the functions in  
such a way that you always maintain com-  
plete control over your vehicle in all traffic  
situations.  
Say the desired command after the signal tone.  
To turn off the voice recognition system, press  
and hold the button on the multifunction  
steering wheel, or say or press Cancel  
ðfig. 21.  
1
Operating with voice commands  
Do not use the voice recognition system in  
emergencies because your voice may change  
in stressful situations. The system may take  
longer to dial the number or may not be  
able to dial it at all. Dial the emergency  
number manually.  
Applies to: MMI: To operate the voice recogni-  
tion system using voice commands, select on  
the home screen: SETTINGS > General >  
(Speech dialog system) > Activate the speech  
dialog system with "Hey Audi".  
Say the activation phrase Hey Audi together  
with the desired command.  
To turn off the voice recognition system, say  
Cancel or press and hold the button on the  
Tips  
There are no voice guidance* prompts when a  
dialog is active.  
multifunction steering wheel, or press  
1
ðfig. 21.  
Commands and assistance  
In the voice recognition system menu, possible  
commands or help settings are displayed for the  
current dialog 3 .  
To receive additional help for the current dia-  
log, say or press Help 2 .  
29  
Voice recognition system  
To pause voice recognition, say or press Pause  
voice control that can be controlled externally.  
There must be no phone calls in progress and the  
parking aid must not be active.  
4 . To reactivate voice recognition, press  
4
again or briefly press the button on the mul-  
tifunction steering wheel.  
To turn on external voice operation, press and  
hold the button on the multifunction steer-  
ing wheel.  
To turn off the external voice operation, press  
Additional functions  
Applies to: vehicles with voice recognition system  
and hold the button longer on the multifunc-  
tion steering wheel or press Cancel.  
Command during voice output  
If the function is turned on, you can simply say a  
new command during a prompt.  
Using external voice operation  
Say the desired command after the signal tone.  
Applies to: MMI: Select on the home screen:  
To reactivate voice recognition when it is  
paused, press the button briefly on the mul-  
tifunction steering wheel or press Resume.  
SETTINGS > General > Speech dialog system >  
Allow commands during voice output.  
Online recognizer  
Applies to: vehicles with online recognizer  
Tips  
You can activate the online recognizer for addi-  
tional functions and to improve the results of  
voice recognition. A supported menu language  
must be selected. When there is an active Inter-  
net connection, the spoken command is evaluat-  
ed in the vehicle and online.  
Audi simply provides access to control your  
mobile device with voice operation and does  
not assume any responsibility for the con-  
tents and commands within the external voice  
control.  
When you turn on the voice recognition system  
for the first time, a menu for the online recog-  
nizer will open, or  
Applies to MMI: Select on the home screen:  
SETTINGS > General > Speech dialog system >  
Consent to online speech recognizer.  
Read the licensing agreements and accept  
them.  
Note  
Read the information about Audi connect, es-  
pecially regarding connectivity costs ð in  
General information on page 181.  
External voice operation  
Applies to: vehicles with external speech dialog system  
You can access and control the voice operation on  
a connected mobile device through your vehicle.  
Turning external voice operation on or off  
Requirement: the ignition and the MMI must be  
turned on. A mobile phone must be connected to  
the MMI with the Handsfree profile ðpage 169.  
The mobile device being connected must have  
30  
Global functions  
Quick access steering wheel button  
Depending on vehicle equipment, the button  
Global functions  
5
Additional function  
buttons  
may provide quick access to various functions.  
button, see ðpage 96.  
You can program the button with various func-  
tions.  
To bring up the function that is currently set,  
press the button.  
To perform the function that is currently set,  
press and hold the button, or:  
Applies to MMI: Select on the home screen: VE-  
HICLE > Settings & Service > Steering wheel  
button assignment.  
Select and confirm the desired function.  
Fig. 22 Right side of the multifunction steering wheel  
Turning the voice recognition system on or  
off  
button 2 , see ðpage 29.  
Using the phone functions  
button 1 , see ðpage 175.  
WARNING  
Fig. 23 Center console: MMI control knob  
Adjust the volume of the audio system so that  
signals from outside the vehicle, such as po-  
lice and fire sirens, can be heard easily at all  
times.  
Adjusting the volume  
You can adjust the volume of an audio source or a  
system message (for example, from the voice  
recognition system) when the sound is playing.  
To increase or decrease the volume, turn the  
right thumbwheel 3 ðfig. 22 upward or  
downward, or turn the MMI control knob  
ðfig. 23 to the right or left.  
To mute, push the right thumbwheel or the  
MMI control knob.  
Selecting the previous/next track or station  
Press the  /  button 4 or briefly press  
the MMI control knob to the left or right.  
Fast forward/rewind  
Press and hold the  /  button 4 or press  
the MMI control knob to the left or right until  
the desired playback position is reached.  
31  
Personalization  
Personalization  
Users  
ment system settings and vehicle settings at  
all times.  
Tips  
General information  
Applies to: vehicles with personalized user settings  
Certain Infotainment and vehicle settings  
(such as mirrors, last radio stations) may be  
stored, depending on vehicle equipment.  
You can find additional information in the  
MMI. Select on the home screen: SETTINGS  
> General > Legal notes > About Audi con-  
nect.  
Depending on vehicle equipment and your coun-  
try, your vehicle may be able to manage different  
users in the MMI. Each user will be assigned the  
settings that they last used.  
Before you begin driving, you can select a user in  
the MMI and load personalized Infotainment and  
vehicle settings.  
Applies to: myAudi users: The stored set-  
tings can only be transferred to vehicles  
that are capable of receiving the transmit-  
ted information. There may be restrictions  
that prevent this, particularly in other coun-  
tries.  
Possible users in the MMI:  
myAudi user: as a myAudi user, you can use  
Audi connect services that require a myAudi ac-  
count. Certain settings are transferred online  
to your myAudi account. If you log into your  
myAudi account in another vehicle, you can  
load your settings in the other vehicle.  
Applies to: myAudi users: The settings can  
only be transferred and loaded when there  
is coverage from the applicable mobile  
phone service provider.  
Local user: as a local user, you can only store  
settings in the current vehicle. Your settings  
cannot be transferred to other vehicles. Audi  
connect services that can only be used with a  
myAudi account will not be available.  
Applies to: myAudi users with PIN protec-  
tion turned on: If the MMI displays a detect-  
ed user but you simply start driving or wait  
without entering the 4-digit PIN, then the  
guest user will be selected. Some settings  
for the detected myAudi user will be trans-  
ferred to the guest user.  
Guest user: as a guest user, you can store set-  
tings in the vehicle without changing the set-  
tings for other users. Audi recommends only  
using the guest user temporarily, because set-  
tings can be overwritten by other users.  
User management  
Applies to: vehicles with user management  
Depending on vehicle equipment, the following  
options may be used to detect the active user so  
that the user settings can be loaded automatical-  
ly before you start driving.  
Opening user management  
Applies to: MMI  
Press USERS on the home screen.  
Vehicle key  
Selecting a user  
Applies to: MMI  
Requirement: the driver's door has been opened.  
Press on the desired user.  
Enter the 4-digit myAudi PIN, if necessary.  
The detected user must be shown in the MMI.  
Confirm the user shown, select another user  
ðpage 32, or add another user ðpage 32.  
Adding myAudi users  
Applies to: MMI and Audi connect  
WARNING  
Requirement: you must have successfully regis-  
tered at my.audi.com and have created a 4-digit  
myAudi PIN.  
It may not be possible to load Infotainment  
and vehicle settings, or they may only load  
partially. To reduce the risk of an accident, the  
driver must be responsible for the Infotain-  
Press Add user.  
32  
Personalization  
Press Log in now to log in with your myAudi  
credentials.  
Follow the system instructions.  
Key user  
Applies to: vehicles with key user management  
The vehicle owner must be set as the key user to  
use some of the specific Audi connect vehicle  
control services that depend on vehicle equip-  
ment.  
Adding a local user  
Applies to: MMI  
Press Add user.  
Press Initiate setup.  
Press Local user.  
Follow the system instructions.  
The key user automatically has remote access au-  
thorization. This remote access authorization is  
necessary to control certain functions that de-  
pend on vehicle equipment, such as Audi connect  
vehicle control services, through the myAudi app.  
Edit user  
Applies to: MMI  
Setting the key user  
Requirement: the user must be selected and that  
user’s settings must be loaded.  
Requirement: a key user must not be set yet.  
Press on the user.  
To set a key user for the vehicle, you will need a  
myAudi account. Register in the myAudi app or  
at my.audi.com.  
Depending on the user type, available options  
may include the following.  
Add your vehicle to the myAudi app.  
Changing PIN protection or authentication meth-  
ods, depending on the vehicle: when this func-  
tion is turned on, the 4-digit myAudi PIN must be  
entered before any settings for this user can be  
loaded.  
Follow the instructions in the myAudi app.  
Managing additional users  
Depending on the vehicle equipment, you can  
grant authorization for additional users to use  
Audi connect vehicle control services at my.audi.  
com.  
Remove the user from the vehicle: the user will  
only be deleted in the vehicle from the list in the  
MMI.  
Removing the key user  
Change name: you can change the name of the  
local user.  
If you remove the key user, all other users that  
were stored by the key user at my.audi.com and  
their authorizations will be deleted. It will no lon-  
ger be possible to use Audi connect vehicle con-  
trol services, depending on vehicle equipment.  
Removing users  
Applies to: MMI  
Select on the home screen: USER > > one or  
more entries > Delete. The user will only be de-  
leted from the list in the MMI. The authoriza-  
tions for the user in the vehicle (such as key  
user) will not be removed.  
Requirement: a key user must be set.  
Applies to: MMI: Select on the home screen:  
USERS > > Remove key user.  
Tips  
Tips  
Depending on the country and model there  
may be an app other than the “myAudi app”  
available for your vehicle. For additional in-  
formation, see my.audi.com.  
The guest user cannot be renamed.  
When changing users, the new user settings  
are loaded in the vehicle.  
If a user has the symbol, PIN protection is  
active. To turn off PIN protection, you can  
edit the user.  
You do not need to log into the vehicle with  
a myAudi user in order to use Audi connect  
vehicle control services, which depend on  
the vehicle equipment.  
Depending on the country, you may be able  
to use an Audi app or my.audi.com.  
33  
Personalization  
If you sell your vehicle, reset all settings to  
the factory default settings.  
34  
Opening and closing  
Vehicle key  
Opening and closing  
Central locking  
General information  
The term “vehicle key” refers to the remote con-  
trol key or convenience key*. The convenience  
key* is a remote control key with special func-  
tions ðpage 40 and ðpage 98.  
WARNING  
Automatic locking  
If you leave the vehicle, turn off the ignition  
and take the key with you. This applies par-  
ticularly when children remain in the vehi-  
cle. Otherwise, children could start the vehi-  
cle or operate electrical equipment (such as  
power windows), which increases the risk of  
an accident.  
If you unlock the vehicle but then do not open  
any of the doors, the luggage compartment, or  
the hood within a short period time, the vehicle  
locks again automatically. This feature prevents  
the vehicle from being accidentally left unlocked  
for a long period of time.  
No one, especially children, should stay in  
the vehicle when it is locked from the out-  
side, because the windows can no longer be  
opened from the inside. Locked doors make  
it more difficult for emergency workers to  
enter the vehicle, which increases the risk of  
death.  
Automatic locking (Auto Lock)  
The Auto Lock function locks all doors and the  
luggage compartment lid once the speed exceeds  
approximately 9 mph (15 km/h). The vehicle will  
unlock again if the unlock function in the central  
locking switch is pressed, the “P” position is se-  
lected, or the ignition is turned off.  
Applies to: child safety lock: No one, espe-  
cially children, should stay in the vehicle  
when the child safety lock is activated, be-  
cause the rear doors and the windows can  
no longer be opened from the inside. This  
increases the risk of death.  
You can open the doors individually from the in-  
side by pulling the door handle one time. To open  
the rear doors individually, you must pull the  
door handle twice.  
In the event of a crash with airbag deployment,  
the doors will also automatically unlock to allow  
access to the vehicle.  
Description  
Unintentionally locking yourself out  
All doors and the luggage compartment lid can  
be centrally unlocked and locked at once. You can  
select in the MMI if the entire vehicle or only the  
driver's door should unlock when unlocking the  
vehicle ðpage 36. The turn signals flash twice  
when you unlock the vehicle and flash once when  
you lock the vehicle. If they do not flash when  
locking, check if all doors and lids are closed.  
Only lock your vehicle when all of the doors and  
the luggage compartment lid are closed and  
there is no key in the vehicle. This reduces the  
risk of locking yourself out accidentally.  
The following features help to reduce the risk of  
locking your vehicle key in the vehicle:  
If the driver's door is open, the vehicle cannot  
be locked by pressing the button on the vehi-  
cle key or by touching the locking sensor* on a  
door.  
Depending on the vehicle equipment, you may  
have different options for centrally unlocking and  
locking your vehicle.  
Vehicle key ðpage 40  
If the vehicle key that was used most recently is  
inside the luggage compartment, the luggage  
compartment lid will automatically open again  
Sensors in the door handles ðpage 40  
Lock cylinder in the driver's door ðpage 38  
Interior central locking switch ðpage 37  
after it closes ð  
.
35  

Related Topics

Popular Owner Manuals