2007-2013 Audi A5 4 Door Lights and vision -> Digital compass User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Lights and vision -> Digital compass for Your Audi A5 4 Door First Generation (2007-2013)

Lights and vision68
Applies to vehicles: with automatic anti-dazzle adjustment for exterior mirrors
Automatic anti-dazzle adjustment for exterior
mirrors
The exterior mirrors darken together with the automatically
adjusting interior mirror. When the ignition is on, the mirrors will
darken automatically according to the amount of light received (for
example from the headlights of a vehicle behind).
When the interior lights are switched on, or when reverse gear is
engaged, the mirrors revert to their original (i.e. not darkened)
condition.
WARNING
Electrolyte fluid can leak from a broken mirror. This fluid can cause
irritation to the skin, eyes, and respiratory organs. Wash thor-
oughly with clean water should you come into contact with this
fluid. Seek medical assistance if needed.
Caution
Electrolyte fluid leaking from a broken mirror can cause damage to
the paintwork or plastic surfaces. Use a sponge or similar to remove
the fluid as soon as possible.
Note
• If you switch off the anti-dazzle function for the interior mirror,
this will also deactivate the anti-dazzle function for the exterior
mirrors.
• The automatic anti-dazzle function will only work properly if the
sun blind* for the rear window is not in use and there are no other
objects preventing light from reaching the interior mirror.
Digital compass
Applies to vehicles: with digital compass
Activating and deactivating the compass
The compass direction will appear in the mirror.
– To switch the compass on and off, press and hold
button until the compass display in the mirror
⇒ fig. 70 appears or disappears.
The digital compass only works when the ignition is on. The points
of the compass are displayed as follows: N (North), NE (North East),
E (East), SE (South East), S (South), SW (South West), W (West), NW
(North West).
Note
To avoid inaccurate compass readings, do not hold any remote
controls or other electrical devices or metal objects near the interior
mirror.
Fig. 70 Interior mirror:
activated digital
compass
A
A
document_0900452a8179700c.book Seite 68 Donnerstag, 22. März 2007 10:19 10
Lights and vision 69
Controls Safety Driving tips General maintenance Self-help Technical data
Applies to vehicles: with digital compass
Setting the correct compass calibration zone
The correct compass calibration zone must first be set
before the compass can give an accurate reading.
Fig. 71 Map of compass calibration zones
– Press and hold button ⇒ page 68, fig. 70 until the
currently set zone number is displayed on the interior
mirror.
– Press button repeatedly until the correct zone number
appears. The adjustment mode will be ended automati-
cally after a few seconds.
Applies to vehicles: with digital compass
Calibrating compass
The compass must be re-calibrated if the display is incor-
rect or inaccurate.
– Press and hold button until the letter C appears in the
interior mirror.
– Drive in a circle at a speed of about 10 km/h until a point
of the compass is displayed in the interior mirror.
WARNING
Calibrate your compass at a location where there is no traffic so
that you do not endanger yourself or other road users (accident
risk).
A
A
A
A
A
A
document_0900452a8179700c.book Seite 69 Donnerstag, 22. März 2007 10:19 10

Related Topics

Popular Owner Manuals