2025-2026 Audi A5 4 Door Assist systems User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Assist systems for Your Audi A5 4 Door Third Generation (2025-2026)

Assist systems  
System limitations  
Observe the limitations of the assist systems,  
Assist systems  
General information  
Safety precautions  
sensors, and cameras ð  
.
WARNING  
Observe the safety information for the assist sys-  
The use of an assist system cannot over-  
come the natural laws of physics. A collision  
cannot be prevented in certain circumstan-  
ces.  
tems, sensors, and cameras ð  
.
WARNING  
As the driver, you have complete responsi-  
bility for all driving operations at all times.  
The assist systems cannot replace the driv-  
er's attention. Give your full attention to  
driving the vehicle, and be ready to inter-  
vene in the traffic situation at all times.  
Activate the assist systems only if the sur-  
rounding conditions permit it. Always adapt  
your driving style to the current visual,  
weather, road, and traffic conditions.  
Loose objects can be thrown around the ve-  
hicle interior during sudden driving or brak-  
ing maneuvers, which increases the risk of  
an accident. Store objects securely while  
driving.  
Warnings, messages, or indicator lights may  
not be displayed or initiated on time or cor-  
rectly, for example, if vehicles are approach-  
ing very fast.  
Corrective interventions by the assist sys-  
tems, such as steering or braking interven-  
tions, may not be sufficient or they may not  
occur. Always be ready to intervene.  
Tips  
Due to the system limitations when detect-  
ing the surrounding area, the systems may  
warn or intervene unexpectedly or too late  
in certain situations. The assist systems may  
also interpret a driving maneuver incorrectly  
and then warn or intervene unexpectedly.  
The systems may not function as expected  
in unusual driving situations, such as driving  
offroad, on unpaved roads, on loose ground,  
on inclines, or on grooves in the road.  
For the assist systems to be able to respond  
correctly, the function of the sensors and  
cameras must not be restricted. Note the in-  
formation on sensors and cameras  
ðpage 128.  
Tips  
The systems may not function correctly in  
unclear traffic situations, such as turn lanes,  
exit ramps, construction zones, rises or dips  
that obstruct visibility, intersections, traffic  
circles, toll booths, or city traffic.  
Pay attention to applicable local regulations  
relating to driving tasks, leaving space for  
emergency vehicles, vehicle distance, speed,  
parking location, wheel placement, etc. The  
driver is always responsible for following  
the laws that are applicable in the location  
where the vehicle is being operated.  
The detection of the surrounding area can  
be limited, for example by vehicles traveling  
ahead or by rain, snow, heavy spray, or light  
shining into the camera.  
You can cancel a steering or braking inter-  
vention by the system by braking or acceler-  
ating noticeably, steering, or deactivating  
the respective assist system.  
The steering wheel touch recognition may  
be limited when you wear gloves. Steering  
intervention requests from the steering as-  
sist systems may occur more frequently.  
If accessories have been mounted on the  
steering wheel, the steering assist systems  
may be limited. The frequency of steering  
intervention requests from the steering as-  
sist systems may vary as well.  
Always check the assist systems settings be-  
fore driving. The settings may have been  
changed, for example by turning off the ig-  
nition or by other persons.  
127  
Assist systems  
The wheel sensors on the rear corners of the ve-  
hicle are positioned so that the adjacent lanes to  
the left and right are detected on roads with a  
normal lane width.  
Surrounding area  
detection  
Sensor and camera coverage areas  
Ultrasonic sensors  
Depending on vehicle equipment, various areas  
may be displayed in the MMI using the ultrasonic  
sensors ðfig. 101.  
The range of the displays depends on the location  
of the ultrasonic sensors:  
2
3
4
5
6
Approximately 4 feet (1.20 m)  
Approximately 3 feet (0.90 m)  
Approximately 5.2 feet (1.60 m)  
Approximately 3 feet (0.90 m)  
Approximately 3 feet (0.90 m)  
The side area 6 is detected and evaluated when  
passing. There may have been changes to the sur-  
rounding area after turning off the ignition and  
on again, after opening the doors, or if the vehi-  
cle is left stationary for a period of time. In this  
case, the area will appear black until the area has  
been detected and evaluated.  
Fig. 101 Sensor detection ranges  
Cameras  
Use the camera image in the display to assist you  
only if it shows a good, clear picture. Keep in  
mind that the image in the display is enlarged  
and distorted. Under certain circumstances, ob-  
jects may appear different and unclear in the dis-  
play.  
The rearview camera can only detect the area  
marked in red ðfig. 102. Only this area is dis-  
Fig. 102 Rearview camera coverage area  
played on the center display ð  
.
The assist systems analyze the data from various  
sensors and cameras installed in the vehicle. Do  
not use any assist systems if there is damage in  
the area of the sensors and cameras or on the ve-  
hicle underbody. Damage can impair the function  
of the sensors and cameras or cause malfunc-  
tions. Have an authorized Audi dealer or author-  
ized Audi Service Facility check their function.  
WARNING  
Sensors and cameras have spots in which  
the surrounding area cannot be detected.  
Objects, animals, and people may only be  
detected with limitations or may not be de-  
tected at all. Always monitor the traffic sit-  
uation and the vehicle's surroundings direct-  
ly and do not become distracted.  
Radar sensors  
Sensors may be subject to physical system  
limitations. External sources of interfer-  
ence, for example from other vehicles, can  
Depending on the vehicle equipment, the area in  
front of and behind the vehicle may be detected  
ðfig. 101 1 .  
128  
Assist systems  
The function of the sensors and cameras  
may be limited when light and visibility con-  
ditions are poor, for example when driving  
into a tunnel, when there is glare, or when  
there are reflective objects.  
impair sensor functionality. The assist sys-  
tems may be limited or may not function as  
expected.  
Note  
External ultrasonic sensors, such as those in  
other vehicles, can interfere with the sen-  
sors.  
Obstacles may disappear from the measure-  
ment range when approaching them, even if  
they were already detected.  
The coverage areas of the sensors ðfig. 101  
and cameras ðfig. 102 are schematic repre-  
sentations and do not represent a true-to-  
scale image of the sensor ranges.  
The system complies with United States FCC  
regulations and ISED regulations  
In some situations, the ability of the sensors  
and cameras to detect and display certain  
objects may be limited:  
Objects located above the coverage area,  
such as bumpers on parked cars, garage  
doors that are partially open, or objects  
that are hanging  
ðpage 310.  
Low obstacles  
Locations of the sensors and cameras  
Narrow objects, such as barrier chains, fo-  
liage, poles, or fences  
Projecting objects, such as trailer draw  
bars  
Objects with certain surfaces and struc-  
tures, such as fabric  
Tips  
Exterior mirrors equipped with peripheral  
cameras must always be folded out fully to  
ensure correct functionality. Make sure the  
mirrors are folded out fully when driving.  
The sensors and cameras and the areas  
around them must not be obstructed or  
painted, because this can impair the func-  
tion of the systems that depend on them.  
Make sure that the sensors and cameras are  
free of snow, ice, and other deposits. At-  
tachments, stickers, adhesive, paint or simi-  
lar objects must not be applied to sensors  
or extend into the visual field of the sensors  
and cameras.  
Fig. 103 Front area: sensors and cameras  
Fig. 104 Rear area: sensors and cameras  
On vehicles that have factory-installed li-  
cense plate brackets on the front of the ve-  
hicle, the brackets may only be replaced  
with ones that are the same size and made  
of the same material. Do not install any li-  
cense plate brackets on the front of vehicles  
that do not have factory-installed brackets.  
Otherwise, the function of the system could  
be impaired.  
Front area  
Depending on the vehicle equipment, the follow-  
ing sensors and cameras may be installed:  
Camera behind the windshield  
Peripheral cameras on the exterior mirrors  
Front peripheral camera in the radiator grille  
Front and side ultrasonic sensors  
129  
Assist systems  
Front radar sensors at the corners of the bump-  
er  
Parking aid menu  
Rear area  
Depending on the vehicle equipment, the follow-  
ing sensors and cameras may be installed:  
Rearview camera in the luggage compartment  
lid  
Radar sensors at the rear corners of the vehicle  
Rear and side ultrasonic sensors  
Fig. 105 Center console: parking aids button  
Tips  
The locations of the sensors may differ  
slightly depending on vehicle equipment.  
Some sensors are installed under vehicle  
components and cannot be seen from the  
outside.  
In the Parking aid menu, you can turn certain  
parking aids on or off or adjust them to your pref-  
erences.  
Applies to MMI: Select on the home screen: VE-  
HICLE > Parking aid, or  
The system complies with United States FCC  
regulations and ISED regulations  
ðpage 310.  
Press the button ðfig. 105 in the center  
console and press  
in the center display when  
the parking system is active.  
Driver assistance menu  
You can turn certain systems on/off by pressing  
>
/or adjust them to your preferences  
.
In the Driver assistance menu, you can turn cer-  
tain assist systems on or off, or adjust them to  
your preferences.  
Possible settings  
The possible settings depend on the vehicle  
equipment. Some settings are only available via  
Applies to MMI: Select on the home screen: VE-  
HICLE > Driver assistance.  
and under certain conditions.  
Automatic activation ðpage 163  
Front and rear volume ðpage 164  
Entertainment fader ðpage 164.  
View ðpage 167  
You can turn certain systems on/off by pressing  
>
/or adjust them to your preferences  
.
WARNING  
Rear cross-traffic assist ðpage 169  
Observe the safety precautions and note the  
limitations of the assist systems, sensors, and  
cameras ðpage 127 to ðpage 130.  
WARNING  
Observe the safety precautions and note the  
limitations of the assist systems, sensors, and  
cameras ðpage 127 to ðpage 130.  
130  

Related Topics

Popular Owner Manuals