Get Care and cleaning -> Cleaning and care information Guide for Audi A5 4 Door Third Generation (2025-2026)

Care and cleaning

ter directly onto electrical/electronic com-

ponents when cleaning the engine compart-

ment. Such components can be seriously

damaged by the entry of fluids and by pres-

sure, and this can result in component fail-

ure.

– To reduce the risk of cuts, protect yourself

from sharp metal components when wash-

ing the underbody or the inside of the wheel

housings.

– After washing the vehicle, the effectiveness

of the brakes may be delayed due to mois-

ture on the brake rotors or ice in the winter.

This increases the risk of an accident. The

brakes must be dried with a few careful

brake applications.

– To reduce the risk of paint damage, do not

wash the vehicle in direct sunlight.

– To reduce the risk of damage, do not wash

decorative decals* with a pressure washer.

– To reduce the risk of damage to the surface,

do not use insect removing sponges, kitchen

sponges, or similar items.

Note

– If you wash the vehicle in an automatic car

wash, you must fold the exterior mirrors in

to reduce the risk of damage to the mirrors.

Power folding exterior mirrors* must only

be folded in and out using the power folding

function.

– When washing matte finish painted vehicle

components:

– Do not use polishing agents or hard wax

to reduce the risk of damage to the sur-

face.

– Never use protective wax. It can destroy

the matte finish effect.

– To reduce the risk of damage to the rims

and tires, compare the width between the

wheels on your vehicle with the distance be-

tween the guide rails in the car wash.

– To reduce the risk of damage, compare the

height and width of your vehicle with the

height and width of the inside of the car

wash.

– Do not place any stickers or magnetic

signs on vehicle components painted with

matte finish paint. The paint could be

damaged when the stickers or magnets

are removed.

For the sake of the environment

– Make sure there is sufficient ground clear-

ance when driving into a car wash with a

conveyor belt ðpage 113. There is risk of

damage because the vehicle could come in

contact with the guide rails.

Only wash the vehicle in facilities specially de-

signed for that purpose. This will reduce the

risk of dirty water contaminated with oil en-

tering the sewer system.

– Using a pressure washer incorrectly can

cause damage. Never direct a stream of wa-

Cleaning and care information

When cleaning and caring for individual vehicle

components, refer to the following tables. The

information contained here is simply recommen-

dations. For questions or for components that

are not listed, consult an authorized Audi dealer

or authorized Audi Service Facility. Also follow

the information found in ð

.

Exterior cleaning

Component

Situation

Solution

Windshield wiper Deposits

Soft cloth with glass cleaner, ðpage 63

blades

a)

Headlights/

tail lights

Deposits

Soft sponge with a mild soap solution



279

Care and cleaning

Component

Situation

Deposits

Solution

Sensors/

camera lenses

Sensors: soft cloth with a solvent-free cleaning product

Camera lenses: soft cloth with an alcohol-free cleaning sol-

ution

Snow/ice

Hand brush/solvent-free de-icing spray

Water

Wheels

Road salt

Brake dust

Road salt

Acid-free special cleaning solution

Exhaust tail

pipes

Water, cleaning solution suitable for stainless steel, if nec-

essary

a)

Decorative parts Deposits

Mild soap solution , cleaning solution suitable for stain-

and

less steel, if necessary

trim

a)

Rubber seals

Paint

Deposits

Frost

Microfiber cloth with a mild soap solution

Protect the seals on doors, covers, and lids from freezing

using a suitable care product

Spilled fuel

Surface rust

Rinse with water immediately

Rust remover, then treat with hard wax; for questions, con-

sult an authorized Audi dealer or authorized Audi Service

Facility.

Corrosion

Have it removed by an authorized Audi dealer or authorized

Audi Service Facility.

Water no longer

beads on the surface

of clean paint

Treat with hard wax (at least twice per year)

No shine even though Treat with suitable polish; then apply paint protectant if

paint has been pro-

tected/paint looks

poor

the polish that was used does not contain any protectant

Deposits such as in-

Dampen with water immediately and remove with a micro-

sects, bird droppings, fiber cloth

tree sap, and road

salt

a)

Grease-based con-

taminants such as

cosmetics or sunblock

Remove immediately with a mild soap solution and a soft

cloth

Carbon compo-

nents

Deposits

Clean the same way as painted parts ðpage 278



280

Care and cleaning

Component

Decorative decals Deposits

Deposits such as in-

Situation

Solution

a)

Soft sponge with a mild soap solution

Dampen with water immediately and remove with a micro-

sects, bird droppings, fiber cloth

tree sap, and road

salt

a)

Grease-based con-

taminants such as

cosmetics or sunblock

Remove immediately with a mild soap solution and a soft

cloth

Spilled fuel

Blot immediately with a soft cloth and then remove with a

mild soap solution and a soft cloth

a)

Mild soap solution: maximum two tablespoons of neutral soap in 1 quart (1 liter) of water

Interior cleaning

Component

Situation

Deposits

Solution

Glass cleaner, then wipe dry

Window glass

a)

Decorative parts Deposits

Mild soap solution

and

trim

Plastic parts

Deposits

Damp cloth

a)

Heavier deposits

Mild soap solution , detergent-free plastic cleaning solu-

tion, if necessary

Displays/instru- Deposits

ment cluster

Soft cloth with LCD cleaner; dust in the lower area of the

instrument cluster can be removed using a soft brush.

a)

Controls

Deposits

Soft brush, then a soft cloth with a mild soap solution

a)

Safety belts

Mild soap solution , allow to dry before letting them re-

tract

Textiles,

Deposits adhering to Vacuum cleaner

artificial leather, the surface

a)

microfiber

Water-based deposits Absorbent cloth and mild soap solution

such as coffee, tea,

blood, etc.

a)

Oil-based deposits

Apply a mild soap solution , blot away the dissolved oil or

such as oil, make-up, dye, treat afterward with water, if necessary

etc.

Special types of de-

posits such as ink,

nail polish, latex

paint, shoe polish,

etc.

Special stain remover, blot with absorbent material, treat

afterward with mild soap solution, if necessary

a)



281

Care and cleaning

Component

Situation

Fresh stains

Solution

a)

Natural leather

Cotton cloth with a mild soap solution

Water-based deposits Fresh stains: absorbent cloth

such as coffee, tea,

blood, etc.

dried stains: stain remover suitable for leather

Oil-based deposits

Fresh stains: absorbent cloth and stain remover suitable

such as oil, make-up, for leather

etc.

Dried stains: oil cleaning spray

Special types of de-

posits such as ink,

nail polish, latex

paint, shoe polish,

etc.

Spot remover suitable for leather

Care

Regularly apply conditioning cream that protects from

light and penetrates into the material. Use special colored

conditioning cream, if necessary.

Carbon compo-

nents

Deposits

Clean the same way as plastic components

a)

Mild soap solution: maximum two tablespoons of neutral soap in 1 quart (1 liter) of water

– Never use warm or hot water to remove

snow or ice from the camera lens. This

could cause the lens to crack.

WARNING

The windshield must not be treated with wa-

ter-repelling windshield coating agents. Un-

der unfavorable conditions, such as wetness,

darkness, and when the sun is low, these coat-

ings can cause increased glare, which increas-

es the risk of an accident. They can also cause

wiper blade chatter.

– Never use abrasive cleaning materials or

alcohol to clean the camera lens. This

could cause scratches and cracks.

– Door windows

– Remove snow and ice on windows and ex-

terior mirrors with a plastic scraper. To re-

duce the risk of scratches, move the scra-

per only in one direction and not back and

forth.

Note

– Headlights and tail lights

– Never clean the headlights or tail lights

with a dry cloth or sponge because the

lights could be damaged.

– Never remove snow or ice from door win-

dows and mirrors using warm or hot water

because this could cause cracks to form.

– To reduce the risk of damage to the rear

window defogger, do not apply any stick-

ers on the heating wires on the inside of

the window.

– Do not use any cleaning products that con-

tain alcohol, because they could cause

cracks to form.

– Wheels

– Decorative parts and trim

– Never use any paint polish or other abra-

sive materials.

– Never use chrome care or cleaning prod-

– Damage to the protective layer on the

rims, such as stone chips or scratches,

must be repaired immediately.

– Camera lenses

ucts.

– Rubber seals

– There is a risk of damage if chemical

cleaning solutions or solvents are used.

– Paint



282

Care and cleaning

– To reduce the risk of scratches, the vehicle

must be free of dirt and dust before pol-

ishing or waxing.

belts. This could cause damage to the belt

webbing.

– If there is damage to the webbing, the

connections, the retractors, or the buck-

les, have them replaced by an authorized

Audi dealer or authorized Audi Service Fa-

cility.

– To prevent paint damage, do not polish or

wax the vehicle in direct sunlight.

– To reduce the risk of paint damage, do not

polish away rust spots.

– Textiles/artificial leather/microfiber

– Remove cosmetics and sunscreen immedi-

ately because they could damage the

paint.

– Never treat artificial leather or microfiber

with leather care products, solvents, floor

polish, shoe polish, spot remover, or simi-

lar products.

– Decorative decals

– Do not clean decorative decals with a pres-

sure washer, because the decals could

loosen.

– Have a cleaning specialist remove stub-

born stains to reduce the risk of damage.

– Never use steam cleaners, brushes, hard

sponges, etc. when cleaning.

– To reduce the risk of damage, do not use

any rough powder or abrasive cleaning

products.

– Do not turn on the seat heating* to dry

the seat.

– To reduce the risk of damage, do not pol-

ish decorative decals.

– Objects with sharp edges, such as zippers

or rivets on clothing or belts, can cause

damage to the surface.

– Due to the risk of damage, do not use an

ice scraper to remove snow and ice on win-

dows with decorative decals on them.

– Displays and instrument cluster

– Open hook and loop fasteners, for exam-

ple on clothing, can damage seat covers.

Make sure hook and loop fasteners are

closed.

– Make sure that the display and instrument

cluster are turned off and have cooled

down before cleaning. To turn off the cen-

ter display, select on the MMI home

screen: SETTINGS > Display & Brightness

> MMI > Screen cleaning.

– Natural leather

– Never treat leather with solvents, floor

polish, shoe polish, spot remover or simi-

lar products.

– Displays, the instrument cluster, and the

trim surrounding it must not be cleaned

with dry cleaning methods because they

could become scratched.

– Objects with sharp edges, such as zippers

or rivets on clothing or belts, can cause

damage to the surface.

– Never use steam cleaners, brushes, hard

sponges, etc. when cleaning.

– Make sure no fluids enter the spaces be-

tween the instrument cluster and the

trim, because this could cause damage.

– Controls

– Do not turn on the seat heating* to dry

the seat.

– To help prevent the leather from fading,

do not leave the vehicle in direct sunlight

for long periods of time. If leaving the ve-

hicle parked for long periods of time, you

should cover the leather to protect it from

direct sunlight.

– Make sure that no fluids enter the con-

trols, because this could cause damage.

– Safety belts

– Do not remove the safety belts to clean

them.

– Never clean safety belts or their compo-

nents with chemicals or with corrosive flu-

ids or solvents and never allow sharp ob-

jects to come into contact with the safety

Tips

– Insects are easier to remove from paint that

has been freshly waxed.



283

Care and cleaning

– Regular waxing can prevent rust spots from

forming.

– Decorative decals can age due to environ-

mental conditions, which can result in dam-

age such as brittleness. The color may fade

if exposed to excessive sunlight.

Taking your vehicle out

of service

If you would like to take your vehicle out of serv-

ice for a long period of time, contact an author-

ized Audi dealer or authorized Audi Service Facili-

ty. You can obtain information about the steps to

complete depending on the conditions for taking

the vehicle out of service (duration, location,

etc.).

284

Care and cleaning -> Cleaning and care information for Your Audi A5 4 Door Third Generation (2025-2026)

Related Topics

Popular Owner Manuals

Latest Owner Manuals