Get Checking and Filling Guide for Audi A5 4 Door Third Generation (2025-2026)

Checking and Filling

Fuel

Note

– Filling the tank just one time with leaded

fuel or other metallic additives will cause

permanent deterioration to the catalytic

converter function.

Types of gasoline

The correct gasoline grade is stated on the inside

of the fuel filler door.

– When gasoline with an octane rating that is

too low is used, high speeds or heavy engine

load can lead to engine damage.

The vehicle is equipped with a catalytic converter

and must only be driven with unleaded gasoline.

Tips

Audi recommends using TOP TIER Detergent Gas-

oline. For additional information on TOP TIER De-

tergent Gasoline, visit www.toptiergas.com.

The vehicle may be filled with fuel that has a

higher octane rating than what is required by

the engine.

The individual gasoline grades are differentiated

by octane ratings. This value is given with

(R+M)/2 equating to AKI or in RON.

Gasoline mixture

Gasoline with alcohol (ethanol)

The headings below match the sticker in the fuel

filler door (examples):

You can fuel your vehicle with unleaded gasoline

that has an ethanol content of up to 15%, for ex-

ample “E15”.

UNLEADED FUEL ONLY MIN. (R+M)/2 87

Regular / MIN. RON 91 Regular

Gasoline adapted to the season

Use regular gasoline with minimum 87 AKI /

91 RON ð

.

Many gasoline fuels are adapted to the seasons.

When the season changes, refueling at high-traf-

fic gas stations is recommended. It is more likely

that the gasoline will be suitable for the season

there.

Audi recommends using premium gasoline with

minimum 91 AKI / 95 RON to achieve the rated

horsepower and torque.

UNLEADED FUEL ONLY PREMIUM MIN.

(R+M)/2 91 / SUPER MIN. RON 95

Note

Using premium gasoline with minimum 91 AKI /

95 RON is recommended.

– Do not use gasoline that does not meet the

specifications.

– Ethanol fuels with a high ethanol percent-

age, such as E30 – E100, must not be used.

The fuel system will be damaged!

– Methanol fuels with a high methanol per-

centage, such as M5 – M100, must not be

used. The fuel system and the engine will be

damaged!

If premium gasoline is not available, you can also

use regular gasoline 87 AKI / 91 RON. However

this does reduce the engine power slightly.

UNLEADED FUEL ONLY PREMIUM MIN.

(R+M)/2 93 / SUPER PLUS MIN. RON 98

Using premium plus gasoline with at least 93

AKI / 98 RON is recommended.

– If you are unable to find out if a specific gas-

oline mixture meets the specifications, ask

the gas station operator or their fuel suppli-

er.

If no premium plus gasoline is available, you can

also use premium gasoline with 91 AKI / 95 RON.

However this does reduce the engine power

slightly.

– Do not use any gasoline mixture whose

composition cannot be identified.

– Audi does not assume any responsibility for

damage to the fuel system or for perform-

ance problems caused by using gasoline



234

Checking and Filling

mixtures different from those specified.

This type of damage also does not fall under

the New Vehicle Limited Warranty or under

the emissions control system warranty.

– If you notice a higher fuel consumption or

poor handling or performance problems due

to such gasoline mixtures, Audi recom-

mends fueling with unblended gasoline.

There is a malfunction in the fuel tank system.

Drive to an authorized Audi dealer or authorized

Audi Service Facility immediately to have the

malfunction corrected.

Fueling procedure

Gasoline additives

An important issue for many automobile manu-

facturers is combustion residue in the engine

that results from the use of certain fuels.

Although types of gasoline differ depending on

the manufacturer, there are similarities. Certain

substances in the gasoline may cause deposits in

the engine. Additives in the gasoline that should

keep the engine and fuel system clean do not all

function equally.

Fig. 156 Right rear side of the vehicle: opening the fuel

filler door

Audi recommends using TOP TIER Detergent Gas-

oline. For additional information on TOP TIER De-

tergent Gasoline, visit www.toptiergas.com.

If you use incorrect fuels over a long period of

time, the maximum engine performance may be

impaired by combustion residue.

Fig. 157 Fuel filler door with attached fuel cap

Note

The fuel filler door is unlocked or locked by the

central locking system.

– Damage or malfunctions caused by the use

of incorrect types of gasoline are not cov-

ered by the New Vehicle Limited Warranty.

– Only gasoline additives that have been ap-

proved by Audi may be used.

►

Unlock the vehicle if necessary.

►

Press on the left side of the fuel filler door to

open it ðfig. 156.

►

Unscrew the tank cap counterclockwise.

Place the cap from above on the open fuel filler

door ðfig. 157.

Insert the fuel pump nozzle all the way into the

fuel filler neck.

Begin fueling. Once the fuel pump nozzle turns

off the first time, the fuel tank is full. Do not

continue fueling, or else the expansion space in

the tank will be filled with fuel.

After the fuel pump has turned off, wait five

seconds before removing the nozzle to allow

the rest of the fuel to finish dripping into the

fuel tank.

Refueling

Messages

►

The following messages may appear, depending

on the vehicle equipment:

Messages

If the  indicator light appears with a corre-

sponding message, refuel the vehicle.

►

 Tank system: malfunction! Please contact

Service



235

Checking and Filling

►

Turn the fuel cap clockwise until it clicks into

place.

Close the fuel filler door and then press on the

left side until it latches.

ing an accident. This can cause explosions,

fires, and injuries.

►

– If you must transport fuel in a fuel contain-

er, note the following:

– Always place the fuel container on the

ground before filling. Never fill the fuel

container with fuel while it is inside or on

the vehicle. Electrostatic discharge can oc-

cur while refueling and the fuel vapors

could ignite.

The correct fuel type for your vehicle can be

found on a label located on the inside of the fuel

filler door. For additional information on fuel, see

ðpage 234.

For the tank capacity in your vehicle, refer to the

Technical Data ðpage 308.

– When using fuel containers made of met-

al, the fuel pump nozzle must always re-

main in contact with the container to re-

duce the risk of static charge.

To reduce the risk of fuel leaking out or vapors

escaping, make sure that the fuel tank is closed

¹⁾

correctly. Otherwise the

turn on.

indicator light will

– Insert the fuel pump nozzle as far as possi-

ble into the filler opening while refueling.

– Follow the applicable legal regulations in

the country where you are driving when

using, storing and transporting fuel con-

tainers.

WARNING

Improper fueling procedures and improper

handling of fuel can result in explosions, fires,

severe burns, and other injuries.

– Make sure that the fuel container meets

the industry standards, for example ANSI

or ASTM F852-86.

– Do not smoke. Keep away from open flames.

– The ignition must be turned off when refuel-

ing.

– Mobile devices, radio devices, and other ra-

dio equipment should always be turned off

when refueling. Electromagnetic rays could

cause sparks and start a fire.

Note

– Remove fuel that has overflowed onto any

vehicle components immediately to reduce

the risk of damage to the vehicle.

– If you do not insert the fuel pump nozzle all

the way into the filler tube, then fuel can

leak out. Spilled fuel can ignite and start a

fire.

– Never drive until the fuel tank is completely

empty. The irregular supply of fuel that re-

sults from that can cause engine misfires.

Uncombusted fuel may enter the exhaust

system and increase the risk of damage to

the catalytic converter.

– Never get into the vehicle when refueling. If

there is an exceptional situation where you

must enter the vehicle, close the door and

touch a metal surface before touching the

fuel pump nozzle again. This will reduce the

risk of electrostatic discharge that can cause

flying sparks. Sparks can start a fire when

refueling.

For the sake of the environment

– Do not overfill the fuel tank, or fuel could

leak out when the vehicle is warming up.

– Fuel should never enter the sewer system or

come into contact with the ground.

WARNING

Tips

Audi does not recommend transporting fuel

containers inside the vehicle. Fuel could leak

out of the container and ignite, especially dur-

The fuel filler door on your vehicle does not

lock if you lock the vehicle from the inside us-

ing the central locking switch.

1)

Depending on the engine and country

236

Checking and Filling

Manually releasing the fuel filler door

Malfunction Indicator Lamp (MIL)

►



See an authorized Audi dealer or authorized

Audi Service Facility if you cannot open the fuel

filler door.

Afterward, drive to an authorized Audi dealer or

authorized Audi Service Facility to have the

malfunction corrected.

If the

indicator light blinks or turns on, there

is a malfunction related to emissions which can,

for example, cause poor emissions quality and

damage to the catalytic converter. Drive slowly to

an authorized Audi dealer or authorized Audi

Service Facility to have the malfunction correct-

ed.

►

Emissions control

system

The indicator light can also turn on if the fuel fill-

1)

er cap is not closed correctly ðpage 235

.

General information

Engine compartment

WARNING

General information

The temperature of the exhaust system is

high, both when driving and after stopping

the engine.

Special care is required if you are working in the

engine compartment

For work in the engine compartment, such as

checking and filling fluids, there is a risk of in-

jury, scalding, accidents, and burns. For this

reason, follow all the warnings and general

safety precautions provided in the following in-

formation. The vehicle's engine compartment is

– Never touch the exhaust tail pipes once they

have become hot. This could result in burns.

– Do not park your vehicle over flammable

materials such as grass or leaves because

the high temperature of the emissions sys-

tem could start a fire.

a dangerous area. ð

.

– Do not apply underbody protectant in the

exhaust system area, because this increases

the risk of fire.

Explanation of warning symbols:

Observe all warnings - there is a risk for



injury!

Catalytic converter

Hot engine components!



Rotating parts!

Observe the safety precautions ðpage 237, Gen-

eral information.

The radiator fan can turn on at any time!

.

The vehicle may only be driven with unleaded

gasoline, or the catalytic converter will be de-

stroyed.

High voltage! Turn off the engine before

coming into contact with any ignition

system components!



Never drive until the tank is completely empty.

The irregular supply of fuel that results from that

can cause engine misfires. Uncombusted fuel

could enter the exhaust system, which could

cause overheating and damage to the catalytic

converter.

The catalytic converter can be damaged

if the oil level is too high!



Hot coolant - there is a risk of scalding!



Always follow the instructions in the



Owner’s Manual.



1)

Depending on the engine and country

237

Checking and Filling

– To protect your face, hands, and arms from

hot steam or coolant, cover the cap with a

thick cloth when opening.

WARNING

The engine/motor compartment in any motor

vehicle is a potentially dangerous area and

can cause serious personal injury.

– Do not remove the engine cover under any

circumstances. This increases the risk of

burns.

– Always use extreme caution when doing any

work in the engine compartment. Always

follow commonly accepted safety practices

and use common sense. Never risk personal

injury.

– Due to the risk of electric shock, never touch

the ignition cable or other components in

the electronic high-voltage ignition system

when the engine is running or is starting.

– If a position is selected while the vehicle is

stationary and the engine is running, do not

press the accelerator pedal inadvertently.

Pressing the accelerator pedal will cause the

vehicle to move, and this could result in an

accident.

– Never perform any work in the engine com-

partment unless you know exactly how to

carry out the job and have the correct tech-

nical information and the correct tools.

– If you are uncertain about what to do, have

the work performed by an authorized Audi

dealer, an authorized Audi Service Facility,

or another qualified workshop. Serious per-

sonal injury may result from work that is not

performed correctly.

– If inspections or repairs must be performed

while the engine is running, moving compo-

nents (such as the ribbed belt, generator,

and radiator fan) pose an additional risk.

– Set the parking brake first and select the

“P” (Park) position.

WARNING

– Turn off the engine.

– Always make sure that no parts of the

body, jewelry, ties, loose clothing, and

long hair can be caught in moving engine

components. Before any work, always re-

move any jewelry and/or ties, tie back long

hair, and make sure all clothing fits close

to the body to reduce the risk of anything

becoming caught in engine components.

– Pay attention to the following warnings list-

ed when work on the fuel system or on the

electrical equipment is required.

– Turn off the ignition.

– Set the parking brake.

– Select the “P” (Park) position.

– Allow the engine to cool.

– Keep children away from the engine com-

partment.

– Never spill fluids on a hot engine. These flu-

ids (such as the freeze protection contained

in the coolant) can catch fire.

– Avoid short circuits in the electrical system.

– Never reach into the radiator fan. The fan is

temperature-controlled and can turn on

suddenly, even when the ignition is turned

off.

– Do not smoke.

– Never work near open flames.

– Always have a working fire extinguisher

nearby.

– Never open the hood when there is steam or

coolant escaping from the engine compart-

ment, because there is a risk that you could

be burned. Wait until no steam or coolant is

escaping.

– All work on the battery or electrical system

in your vehicle can result in injuries, chemi-

cal burns, accidents, or burns. Because of

this, all work must be performed only by an

authorized Audi dealer or authorized Audi

Service Facility.

– The cap on the coolant expansion tank must

never be opened when the coolant is hot.

The cooling system is under pressure. There

is a risk of burns

– Limit your exposure to exhaust and chemi-

cals to as short a time as possible.



238

Checking and Filling

WARNING

California Proposition 65 Warning:

– Engine exhaust, some of its constituents,

and certain vehicle components contain or

emit chemicals known to the State of Cali-

fornia to cause cancer and birth defects and

reproductive harm. In addition, certain flu-

ids contained in vehicles and certain prod-

ucts of component wear contain or emit

chemicals known to the State of California

to cause cancer and birth defects or other

reproductive harm.

Fig. 159 Unlocked hood: lever

Observe the safety precautions ðpage 237, Gen-

eral information.

– Battery posts, terminals and related acces-

sories contain lead and lead compounds,

chemicals known to the State of California

to cause cancer and reproductive harms.

Wash hands after handling.

Make sure the wiper arms are not raised up from

the windshield. Otherwise the paint could be

damaged.

Opening the hood

1)

►

With the door open, pull the lever  below

Note

the instrument panel in the direction of the ar-

When filling fluids, be sure not to add any flu-

ids to the wrong reservoirs. Otherwise severe

malfunctions and engine damage will occur.

row ðfig. 158.

Raise the hood slightly ð

Press the lever ðfig. 159 in the direction of the

arrow. This releases the hooks.

Open the hood.

►

.

►

For the sake of the environment

►

You should regularly check the ground under

your vehicle in order to detect leaks quickly. If

there are visible spots from oil or other fluids,

bring your vehicle to an authorized Audi deal-

er or authorized Audi Service Facility to be

checked.

Closing the hood

►

Push the hood down until you override the

force of the struts.

►

Let the hood fall lightly into the latch. Do not

press it in. ð

.

Messages

Opening and closing the hood

The following messages may appear, depending

on the vehicle equipment:

The hood is released from inside the vehicle.



Warning! Hood is not locked. Stop vehicle

and check the lock

The hood latch is not locked correctly. Stop im-

mediately and close the hood.

WARNING

– Never open the hood when there is steam or

coolant escaping from the engine compart-

ment, because there is a risk that you could



Fig. 158 Footwell: release lever

1)

The  symbol is not available in all countries.

239

Checking and Filling

be burned. Wait until no steam or coolant is

escaping.

hood is latched if the front corners cannot

be lifted.

– For safety reasons, the hood must always be

latched securely while driving. Because of

this, always check the hood after closing it

to make sure it is latched correctly. The

– If you notice that the hood is not latched

while you are driving, stop immediately and

close it, because driving when the hood is

not latched increases the risk of an accident.

Engine compartment overview

The most important check points.

Fig. 160 Engine compartment overview: diagram

Observe the safety precautions ðpage 237, Gen-

eral information.

6

Brake fluid reservoir () ðpage 247

The coolant expansion tank and the engine oil

filling opening may be located in different places

within the engine compartment, depending on

the engine version.

1

2

Washer fluid reservoir () ðpage 252

Jump start points: (+) under a cover, (-)

ground point ðpage 251, Charging the 12

volt vehicle battery ðpage 291, Jump start-

ing

3

4

5

Engine oil filler opening () ðpage 242,

Checking the engine oil level

Sticker for engine oil specifications

ðpage 241

Coolant expansion tank () (depending on

the engine) ðpage 246

240

Checking and Filling

Engine oil

Tips

Audi recommends using engine oils provided

by Audi Genuine Parts.

If the engine oil level is too low

Messages

The following messages may appear, depending

on the vehicle equipment:



Turn off engine. Oil pressure too low

Stop driving and turn off the engine. Check the

engine oil level ðpage 242.

Fig. 161 Engine oil sticker

– If the engine oil level is too low, add engine oil

ðpage 243. Only continue driving once the in-

dicator light turns off.

–

1 Engine oil viscosity

2 Engine oil standard

– If the engine oil level is correct and the indica-

tor light still turns on, turn the engine off and

do not continue driving. See an authorized Audi

dealer or authorized Audi Service Facility for as-

sistance.

If you need to add engine oil, use an oil that

meets the engine oil standard listed on the stick-

er ðfig. 161. The sticker with the specified

standard is located in the front of the engine

compartment ðpage 240, fig. 160. When using

the specified engine oil, you can adjust the oil

level as often as needed.

Applies to: vehicles with oil level warning



Please add oil immediately

Stop driving and turn off the engine. Check the

engine oil level ðpage 242 and add engine oil

immediately ðpage 243.

If engine oil that meets the recommended speci-

fication is not available, in an emergency you

may add a maximum of 0.5 quart (0.5 liter) en-

gine oil of the that meets the following different

standard one time until the next regular oil

change.



Please add max. x qt (x l) oil. You can contin-

ue driving

Add the amount of oil shown immediately

– Standard VW 504 00, ACEA C3, ACEA C4,

API SP or ILSAC GF-6A. All viscosity classes

within these standards are permitted.

ðpage 243.



Please reduce oil level

Audi recommends having the oil changed by an

authorized Audi dealer or authorized Audi Service

Facility.

There is too much oil in the engine and there is a

risk of damaging the catalytic converter or en-

gine. Drive to an authorized Audi dealer or au-

thorized Audi Service Facility immediately to have

engine oil extracted if necessary. Avoid high en-

gine speeds, full acceleration, and heavy engine

loads.

Note

Audi recommends using approved engine oil

that meets the respective VW standard. Using

engine oils which do not meet these quality

standards can cause damage to the engine. As

an exception and only in an emergency, 0.5 qt

(0.5 l) of engine oil that differs from the

standards listed may be used.



Oil level sensor: oil change necessary. Please

contact Service

Fuel has entered the engine oil. This will cause

the engine oil level to rise slowly and the engine

oil quality to decrease. Do not extract engine oil

to reduce the level, because this will increase the 

241

Checking and Filling

risk of engine damage. Drive to an authorized

Audi dealer or authorized Audi Service Facility im-

mediately to have engine oil extracted.

Checking the engine oil level

The engine oil level can be checked in the MMI.

Observe the safety precautions ðpage 237, Gen-

eral information.



Oil level system: malfunction! Please con-

tact Service

►

Park the vehicle on a level surface.

Shut the engine off when it is warm.

Turn only the ignition on again.

Wait approximately five minutes so that the en-

The sensor that checks the engine oil level has

malfunctioned. Drive immediately to an author-

ized Audi dealer or authorized Audi Service Facili-

ty to have the malfunction corrected.

►

gine oil can flow back into the engine oil pan.

Applies to MMI: Select on the home screen: VE-

HICLE > Settings & Service > Oil level.



Oil pressure sensor: malfunction! Please

►

contact Service

►

Read the oil level in the display. Add engine oil

if the bar in the oil level indicator is just below

“min” ðpage 243.

The sensor that checks the engine oil pressure

has malfunctioned. Drive immediately to an au-

thorized Audi dealer or authorized Audi Service

Facility to have the malfunction corrected.

Note



Please drive to warm up engine

If the engine oil level is too low or too high,

there is a risk of engine damage.

Especially low outside temperatures are a main

reason why fuel may get into the engine oil. The

fuel can only evaporate from the engine oil if the

engine oil temperature is high enough.

Tips

The oil level indicator in the display is only an

informational display. If the oil level is too

low, a minimum oil warning appears in the in-

strument cluster. Add oil and close the hood.

The current oil level will be displayed on the

MMI the next time the ignition is turned on.

Drive in the “S” position.

Drive the engine at higher RPMs while avoiding

full acceleration.

You should drive for at least 30 minutes. The in-

dicator light may not turn off during this time.

Repeat the steps that are described at any time.

Tips

The engine oil consumption may be up to

0.5 quart/600 miles (0.5 liter/1,000 km), de-

pending on driving style and operating condi-

tions. In RS models, the oil consumption may

be up to 0.8 qt/600 mi (0.8 L/1,000 km).

Consumption may be higher during the first

3,000 miles (5,000 km). The engine oil level

must be checked regularly. It is best to check

each time you refuel your vehicle and before

long drives.

Have an authorized Audi dealer or authorized

Audi Service Facility repair the malfunction if the

indicator light does not turn off after a few

drives.

WARNING

When the message  Please drive to warm

up engine appears, adjust your speed accord-

ing to the weather, road, terrain, and traffic

conditions. You should never disobey the traf-

fic laws applicable in the country in which you

are driving in order to follow driving recom-

mendations.

– Because of the lubrication and cooling of

the engine, combustion engines consume

oil. The oil consumption varies depending

on the engine and may change during the

service life of the engine. Engines generally

consume more oil at the beginning during

the break-in period. Then oil consumption

stabilizes after the break-in period.

Tips



The oil pressure warning

is not an oil level

indicator. Always check the oil level regularly.



242

Checking and Filling

►

– Under normal conditions, oil consumption

depends on the quality and viscosity of the

oil, the engine RPM, the climate conditions,

and the road conditions. The dilution of oil

from condensation or fuel residue as well as

the age of the oil also play a role. Because

engine wear increases with mileage, oil con-

sumption will increase again over time until

it may be necessary to replace worn compo-

nents.

Turn off the engine.

Open the hood ðpage 239.

Unscrew the cap  for the engine oil filler

opening ðfig. 162.

Carefully add 0.5 quart (0.5 liter) of the correct

oil ðpage 241.

►

Close the engine oil filler opening cap.

Close the hood ðpage 239.

Restart the ignition after two minutes and read

the current oil level in the MMI ðpage 242.

Applies to: using engine oil that meets the rec-

ommended specification: Add some more en-

gine oil again if necessary.

►

– Because all these variables play a role, it is

not possible to define an oil consumption

standard. Therefore, the oil level must be

checked regularly.

– If you believe that your engine has increased

its oil consumption, contact an authorized

Audi dealer or authorized Audi Service Fa-

cility to determine the cause. Please note

that an exact oil consumption measurement

must be done with the necessary care and

accuracy and may take time. An authorized

Audi dealer or authorized Audi Service Fa-

cility is trained in accurately measuring the

oil consumption.

WARNING

– When adding oil, do not let oil drip onto hot

engine components. This increases the risk

of a fire.

– You must close the cap on the oil filler open-

ing correctly so that oil does not leak out on-

to the hot engine and exhaust system when

the engine is running, because this is a fire

hazard.

– Always clean skin thoroughly if it comes into

contact with engine oil.

– You can find information on engine oil and

engine oil capacities for the USA at www.

audiusa.com/help/maintenance, or for Can-

ada at www.audi.ca/ca/web/en/

customer-area/care-and-maintenance/

audi-service-schedules.html, or call

800-822-2834.

– Engine oil is poisonous and must be kept out

of reach of children.

– Store the engine oil securely in the original

container.

Note

– Only use high-grade engine oil that explicit-

ly meets the Audi oil quality standard for

your vehicle. Using another oil may cause

severe vehicle damage.

Adding engine oil

– Do not mix any additives with the engine oil.

Additives may cause engine damage that is

not covered by your New Vehicle Limited

Warranty.

For the sake of the environment

– Oil should never enter the sewer system or

come into contact with the ground.

– Follow the legal regulations in the country

where you are located when disposing of

empty oil containers.

Fig. 162 Engine compartment: engine oil filling opening

cover (example)

Observe the safety precautions ðpage 237, Gen-

eral information.

243

Checking and Filling

Changing engine oil

– Drain the oil into a container designed for

this purpose that is large enough to hold the

full amount of oil in your engine.

Audi recommends having the oil changed at an

authorized Audi dealer or authorized Audi Serv-

ice Facility.

– Engine oil is poisonous. Always store out of

reach of children.

Observe the safety precautions ðpage 237, Gen-

eral information.

– Prolonged contact of used engine oil with

the skin may cause skin damage. Always

wash oil off immediately with soap and wa-

ter to protect your skin.

The engine oil must be changed at the intervals

specified in the Warranty & Maintenance Book-

let. This is very important because the lubrication

function of the oil gradually declines during regu-

lar vehicle operation.

Note

Do not mix any additives with the engine oil.

Additives may cause engine damage that is

not covered by your New Vehicle Limited War-

ranty.

The engine oil should be changed more frequent-

ly under certain circumstances. Have the oil

changed more frequently if you often drive short

distances, your vehicle is predominantly in stop-

and-go traffic situations, is in very dusty environ-

ments, or is operated for long periods of time in

temperatures below zero.

For the sake of the environment

– Before changing the engine oil, make sure

you can dispose of the used engine oil cor-

rectly.

Cleansing additives in the oil make fresh oil ap-

pear darker after the engine has run briefly. This

is normal and no reason to change the engine oil

more frequently than recommended.

– Engine oil must always be disposed of cor-

rectly. Do not dump it in the yard, in the for-

est, or in open water, river channels, or sew-

ers.

– Have your used engine oil recycled by bring-

ing it to a used oil collection site or contact

a gas station.

Because correctly disposing of engine oil is diffi-

cult and special tools and technical knowledge

are needed for an oil change, Audi recommends

having your engine oil changed by an authorized

Audi dealer or authorized Audi Service Facility.

Cooling system

If you change the engine oil yourself, please note

the following important information:

Coolant

The engine cooling system is filled with a mixture

of purified water and coolant additive at the fac-

tory. This coolant must not be not changed.

WARNING

If you change the engine oil on the vehicle

yourself, the following precautions must be

followed:

The coolant level is monitored using the  indi-

cator light. However, you should occasionally

check the coolant level.

– Wear protective eyewear.

– Due to the risk of scalding, allow the engine

to cool down sufficiently.

Messages

The following messages may appear, depending

on the vehicle equipment:

– Maintain enough distance when you are re-

moving the oil drain plug. While doing this,

keep your forearm parallel to the ground to

reduce the risk of hot oil dripping down your

arm.

 Turn off engine and check coolant level. See

owner's manual

The coolant level is too low.



244

Checking and Filling

Do not continue driving and turn off the ignition.

Check the coolant level ðpage 246.

for the climate. This is especially important

when driving in colder climates.

– If the G12evo coolant additive is not availa-

ble in an emergency, do not add any other

additive. You could damage the engine. If

this happens, only use distilled water and

restore the correct mixture ratio with the

specified coolant additive as soon as possi-

ble.

– If the coolant level is too low, add coolant

ðpage 246. Only continue driving once the in-

dicator light turns off.

 Coolant temperature: too high. Please let

engine run while vehicle is stationary

Let the engine run at idle for a few minutes to

cool off, until the indicator light turns off.

– Only refill with new coolant.

– Radiator sealant must not be mixed with

the coolant.

– If the indicator light does not turn off, do not

continue driving the vehicle. See an authorized

Audi dealer or authorized Audi Service Facility

for assistance.

– You can continue driving if the permitted

G12evo coolant additive was not added.

However, go to an authorized Audi dealer or

authorized Audi Service Facility immediately

to have the coolant replaced to reduce the

risk of engine damage.

 Coolant system: malfunction! Please turn

off engine

Do not continue driving, shut off the engine, and

turn off the ignition. See an authorized Audi deal-

er or authorized Audi Service Facility for assis-

tance.

– Due to the risk of engine damage, the cool-

ing system should only be refilled by an au-

thorized Audi dealer or authorized Audi

Service Facility. An authorized Audi dealer or

authorized Audi Service Facility can also pro-

vide you with important information about

the recommended coolant additive.

Coolant additive

The coolant additive is made of anti-freezing and

corrosion protection agents. Only add the follow-

ing coolant additives mixed with distilled water.

Coolant additive

G12evo

Specification

TL 774 L

The amount of coolant additive that needs to be

mixed with water depends on the climate where

the vehicle will be operated. If the coolant addi-

tive percentage is too low, the coolant can freeze

and damage the engine.

Coolant

additive

Freeze protec-

tion

Warm

regions

min. 40%

max. 45%

min. -13 °F

(-25 °C)

Cold

regions

min. 50%

max. 55%

max. -40 °F

(-40 °C)

Note

– Before the start of winter, have an author-

ized Audi dealer or authorized Audi Service

Facility check if the coolant additive in your

vehicle matches the percentage appropriate

245

Checking and Filling

be between the markings 2 when the engine is

cold. When the engine is warm it can be slight-

ly above the upper marking.

Checking coolant

►

If you must add coolant, use a mixture of water

and coolant additive. Audi recommends mixing

the coolant additive with distilled water.

►

Allow the engine to cool ð

Place a large, thick towel on the coolant expan-

sion tank cap.

.

►

Push the release button 1 ðfig. 163 on the

cap and carefully turn it to the left until you

Fig. 163 Engine compartment - coolant expansion tank

feel resistance ð

Push the release button again and remove the

cap completely.

Requirement for adding coolant: there must be

a residual amount of coolant in the expansion

.

(diagram):

1

cover with release button;

2

coolant expan-

►

sion tank markings( 4-cylinder engine)

tank ð

.

►

Add the correct mixture ratio of coolant

ðpage 245 up to the upper marking

ðfig. 163.

2

►

Make sure that the fluid level remains stable.

Add more coolant if necessary.

Turn the cap to the right to tighten it until you

feel resistance a second time.

Fig. 164 Coolant expansion tank markings (6-cylinder en-

gine)

Checking the coolant level/adding coolant

(2)

Applies to: vehicles with coolant expansion tank in the ple-

num chamber

Observe the safety precautions ðpage 237, Gen-

eral information.

Depending on the version of the engine, the cool-

ant expansion tank will be located in the engine

compartment ðpage 246, Checking the coolant

level/adding coolant (1) or in the plenum cham-

ber under a cover ðpage 246, Checking the cool-

ant level/adding coolant (2):

In vehicles with a 6-cylinder engine, the coolant

expansion tank is located under a cover in the

plenum chamber ðpage 240, fig. 160.

►

Park the vehicle on a level surface.

►

Turn off the ignition.

►

Allow the engine to cool ð

Open the hood ðpage 239.

Remove the cover that is located under the

windshield wiper on the front passenger's side.

Place a large, thick towel on the coolant expan-

sion tank cap.

.

Checking the coolant level/adding coolant

(1)

Applies to: vehicles with coolant expansion tank in the engine

compartment

►

In vehicles with a 4-cylinder engine, the coolant

expansion tank is located in the engine compart-

ment ðpage 240, fig. 160.

Push the release button 1 ðfig. 163 on the

cap and carefully turn it to the left until you

feel resistance ð

.

►

Park the vehicle on a level surface.

►

Push the release button again and remove the

cap completely.

There is a float located in the coolant expansion

tank. Read the coolant level using the coolant

level float ðfig. 164. When the engine is cold,

the float must be located between the MIN

►

Turn off the ignition.

Open the hood ðpage 239.

Check the coolant level in the coolant expan-

sion tank ðpage 240, fig. 160 using the outer

markings 2 ðfig. 163. The coolant level must

►



246

Checking and Filling

marking and the edge of the filler opening

(MAX) on the coolant expansion tank

ðfig. 164. When the engine is warm, the float

can also be slightly above MAX.

If the coolant level is correct, turn the cap to

the right to tighten it until you feel resistance a

second time, and then reinstall the cover below

the windshield wiper.

If you must add coolant, use a mixture of water

and coolant additive. Audi recommends mixing

the coolant additive with distilled water.

Requirement for adding coolant: there must be

a residual amount of coolant in the expansion

Note

Coolant loss that results in the coolant expan-

sion tank becoming nearly empty primarily in-

dicates that there are significant leaks in the

cooling system, which can lead to further

damage.

►

– Do not add coolant if the expansion tank is

empty. Air could enter the cooling system

and increase the risk of damage. If this is

the case, do not continue driving. See an au-

thorized Audi dealer or authorized Audi

Service Facility for assistance.

►

– If there is any coolant remaining, add addi-

tional coolant. Drive to an authorized Audi

dealer or authorized Audi Service Facility

immediately to have the malfunction cor-

rected. If the  indicator light turns on

again, do not continue driving and turn off

the ignition. See an authorized Audi dealer

or authorized Audi Service Facility for assis-

tance.

tank ð

.

Add coolant in the correct mixture ratio

ðpage 245 until the float is positioned at the

edge of the filler opening on the coolant expan-

sion tank (= MAX) ðfig. 164.

Make sure that the fluid level remains stable.

Add more coolant if necessary.

Turn the cap to the right to tighten it until you

feel resistance a second time, and then rein-

stall the cover below the windshield wiper.

►

– If there is too much coolant in the expan-

sion tank after adding coolant, drive to an

authorized Audi dealer or authorized Audi

Service Facility as soon as possible to have

the coolant level corrected.

WARNING

– The engine/motor compartment in any vehi-

cle is a potentially dangerous area. Shut off

the engine, turn off the ignition, and allow

the engine to cool before working in the en-

gine compartment. Always follow the infor-

mation found in ðpage 237, General infor-

mation.

– Using non-distilled water increases the risk

of engine damage. Its chemical components

may cause significant corrosion damage in

the engine.

– If you had to add a large amount of non-dis-

tilled water (more than 0.5 liter), then im-

mediately drive to an authorized Audi dealer

or authorized Audi Service Facility to have

the coolant changed.

– Never open the hood if you can see or hear

steam or coolant escaping from the engine

compartment. This increases the risk of

burns. The cooling system is under pressure.

When you no longer see or hear steam or

coolant escaping, you may open the engine

compartment with caution.

Brake fluid

– When working in the engine compartment,

remember that the radiator fan can turn on

even if the ignition is turned off, which in-

creases the risk of injury.

– Coolant additive and coolant can be danger-

ous to your health. For this reason, store the

coolant in the original container and away

from children. There is a risk of poisoning.

Fig. 165 Engine compartment: cap on brake fluid reservoir



247

Checking and Filling

Observe the safety precautions ðpage 237, Gen-

eral information.

an authorized Audi dealer or authorized

Audi Service Facility. If this brake fluid is not

available, another high-grade brake fluid of

equivalent quality may be used, and it must

meet the U.S. Federal Motor Vehicle Stand-

ard (FMVSS) 116 DOT 4, Class 6.

Checking the brake fluid level

The brake fluid reservoir is located under a cover

on the driver’s side.

– Reusing brake fluid or using brake fluid that

is not permitted for your vehicle will signifi-

cantly impair the braking performance and

can even result in a failure of the brake sys-

tem. The manufacturer of the vehicle is not

liable for failures or damage resulting from

this. It will also not be covered by the war-

ranty.

►

Park the vehicle on a level surface.

Lift the cover ðpage 240, fig. 160 at both

openings and remove it.

Read the brake fluid level on the brake fluid

reservoir ðpage 240, fig. 160. The brake fluid

level must be between the MIN and MAX mark-

►

ings ð

.

The brake fluid level is monitored automatically.

Note

Messages

– If the brake fluid level is above the MAX

marking, brake fluid may leak out over the

edge of the reservoir and result in damage

to the vehicle.

The following messages may appear, depending

on the vehicle equipment:

 /  Brakes: stop vehicle and check brake

fluid level

– Do not allow any brake fluid to come into

contact with the vehicle paint, because it

will corrode the paint.

Stop the vehicle and check the brake fluid level.

See an authorized Audi dealer or authorized Audi

Service Facility for assistance.

Electrical system

Changing the brake fluid

The following messages may appear, depending

on the vehicle equipment:

Brake fluid should be changed at regular inter-

vals. Have the brake fluid changed by an author-

ized Audi dealer or authorized Audi Service Facili-

ty. The authorized Audi dealer or authorized Audi

Service Facility will inform you of the replace-

ment intervals.





If the

/

or

indicator light turns on,

there is a malfunction in the power supply, the

battery, or the vehicle electrical system.





/

Electrical system: malfunction! Safely

stop vehicle

WARNING

Safely stop your vehicle, do not continue driving,

and turn off the ignition ð . See an authorized

Audi dealer or authorized Audi Service Facility for

assistance.

– If the brake fluid level is below the MIN

marking, it can impair the braking effect and

driving safety, which increases the risk of an

accident. Do not continue driving. See an au-

thorized Audi dealer or authorized Audi

Service Facility for assistance.



Electrical system: malfunction! Restart not

possible. Please contact Service

– If the brake fluid is old, bubbles may form in

the brake system during heavy braking. This

could impair braking performance and driv-

ing safety, which increases the risk of an ac-

cident.

If you turn off the ignition, you will not be able to

restart the vehicle. Vehicle functions or driving

stability may be limited. Drive to an authorized

Audi dealer or authorized Audi Service Facility im-

mediately.



– The brake fluid in your vehicle must meet

the standard VW 501 14 and is available at

248

Checking and Filling

Not running the vehicle for long periods of

time



Electrical system: malfunction! Please con-

tact Service

The battery will gradually drain if the vehicle

does not run for long periods of time. To ensure

that the vehicle can still be started, the electrical

equipment will be limited or turned off. Some

convenience functions, such as interior lighting

or power seat adjustment, may not be available

under certain circumstances. The convenience

functions will be available again when you start

the engine.

Turn off all electrical equipment that is not need-

ed. If necessary, some equipment will be turned

off automatically. Vehicle functions or driving

stability may be limited. Drive to an authorized

Audi dealer or authorized Audi Service Facility im-

mediately.



Electrical system: low battery charge. Bat-

tery will be charged while driving

The starting ability may be impaired.

Even when electrical equipment is turned off, the

equipment can still drain the battery if the vehi-

cle is not driven for long periods of time. Deep

draining results in a chemical reaction that de-

stroys the inside of the battery. The battery must

be charged every month to prevent this

ðpage 251. Contact an authorized Audi dealer or

authorized Audi Service Facility for more infor-

mation.

– If this message turns off after a little while, the

vehicle battery has charged enough while driv-

ing.

– If the message does not turn off, drive immedi-

ately to an authorized Audi dealer or authorized

Audi Service Facility to have the malfunction

corrected.

WARNING

Winter operation

When there is an electrical system malfunc-

tion, vehicle functions may not work and driv-

ing stability may be limited, which increases

the risk of an accident. Do not continue driv-

ing and turn off the ignition. See an author-

ized Audi dealer or authorized Audi Service Fa-

cility for assistance.

Cold weather places an especially high load on

the 12 volt vehicle battery. Have the battery

checked by an authorized Audi dealer or author-

ized Audi Service Facility before cold weather be-

gins.

Replacing the battery

Applies to: 12 volt vehicle battery

Battery

All work on the battery must only be performed

by an authorized Audi dealer or authorized Audi

Service Facility.

Battery general information

Because of the complex power supply, all work

on batteries such as disconnecting, replacing,

etc., should only be performed by an authorized

Audi dealer or authorized Audi Service Facility

The 12 volt vehicle battery was developed based

on the installation location and is equipped with

safety features. If a 12 volt vehicle battery must

be replaced, ask an authorized Audi dealer or au-

thorized Audi Service Facility about the electro-

magnetic compatibility, size, and the necessary

maintenance, power, and safety standards for

the new 12 volt vehicle battery. The battery vent

on the 12 volt vehicle battery must always be on

the negative terminal side. The battery vent on

the positive terminal side must always be closed.

ð

.

Multiple batteries with different technologies

may be installed in your vehicle:

– Vehicle battery (for example, for starting the

engine, basic power supply) ðpage 250, Safety

precautions

– Auxiliary battery (for example, for recuperation

or optional equipment) ðpage 250, Safety pre-

cautions

When replacing the 12 volt lead-acid vehicle bat-

tery, only use a maintenance-free 12 volt lead-

acid battery that conforms to the TL 825 06 and



249

Checking and Filling

VW 7 50 73 standards. These standards must be

from October 2014 or newer.

and become damaged ðpage 251, Charg-

ing the 12 volt vehicle battery.

– There are electrical components under the

cargo floor behind a trim panel that warm

up during operation. To reduce the risk of

the components overheating, do not store

objects such as blankets under the cargo

floor. If the components overheat, they will

turn off temporarily. This will be indicated

by a message that will be displayed in the

instrument cluster until the temperature re-

turns to normal.

WARNING

– All work on the battery or electrical system

in your vehicle can result in injuries, chemi-

cal burns, accidents, or burns. Because of

this, all work must be performed only by an

authorized Audi dealer or authorized Audi

Service Facility.

– Always have an authorized Audi dealer or

authorized Audi Service Facility replace the

12 volt vehicle battery, because an adapta-

tion must be performed on the vehicle elec-

trical system when the battery is replaced.

Only an authorized Audi dealer or author-

ized Audi Service Facility has the necessary

technology to perform the adaption correct-

ly. Otherwise, there could be a loss of safe-

ty-related functions among other things,

which increases the risk of an accident.

– Using a 12 volt vehicle battery that does not

match the same specifications and dimen-

sions as the factory-installed 12 volt vehicle

battery can result in short circuits or cause a

fire. Serious injuries or death may result.

– Only use maintenance-free and leak-proof

12 volt vehicle batteries that match the

same specifications and dimensions as the

factory-installed 12 volt vehicle battery.

– Never connect a charging cable or jump

start cable directly to the 12 volt vehicle

battery. Only use the connections in the en-

gine compartment ðpage 251.

– Always have an authorized Audi dealer or

authorized Audi Service Facility replace the

12 volt vehicle battery, because an adapta-

tion must be performed on the vehicle elec-

trical system when the battery is replaced.

Only an authorized Audi dealer or author-

ized Audi Service Facility has the necessary

technology to perform the adaption correct-

ly.

– Using a vehicle battery that does not meet

the AUDI AG quality specifications or with a

capacity that is too low will void the vehi-

cle’s certification for use on public roads,

and this will void the vehicle registration

ð

.

For the sake of the environment

 Batteries and electrical/electronic devices

must be disposed of in an environmentally

safe manner ðpage 310, Disposal instruc-

tions.

Safety precautions

WARNING

Explanation of warning symbols:

California Proposition 65 Warning:

– Battery posts, terminals and related acces-

sories contain lead and lead compounds,

chemicals known to the State of California

to cause cancer and reproductive harms.

Wash hands after handling.

Observe all warnings - there is a risk for in-



/ Always follow the instructions in the Own-

jury!



er’s Manual.

12 volt vehicle battery. Energized compo-

nents. Improper handling can result in

short circuits ð in Battery general in-

formation on page 250.

Note



– If the vehicle will be parked for long periods

of time, protect the 12 volt vehicle battery

against the cold so that it will not “freeze”



250

Checking and Filling

With the exception of charging the 12 volt

vehicle battery and jump starting, all oth-

er procedures involving the 12 volt vehicle

battery must be performed by an author-

ized Audi dealer or authorized Audi Serv-

ice Facility ð in Battery general infor-

mation on page 250 ð in Battery gen-

eral information on page 250.

Note

Applies to: mild hybrid drive

– Components must not be connected to the

battery terminals and wires on the 48 volt

battery because this increases the risk of

damage, for example due to overvoltage.

– Have maintenance work performed only by

trained personnel.



Electrolyte fluid is highly corrosive. Always

wear protective gloves and eye protection.

First aid: if electrolyte fluid enters the

eyes, immediately flush with clean water

for several minutes. Seek medical atten-

tion immediately. Immediately neutralize

electrolyte fluid on the skin or clothing us-

ing a soap solution and rinse with plenty

of water. Seek medical attention immedi-

ately if electrolyte fluid is ingested.

– Have the 48 volt lithium battery replaced

only by an authorized Audi dealer or author-

ized Audi Service Facility. Audi recommends

an authorized Audi dealer or authorized

Audi Service Facility, because these loca-

tions have trained personnel and the re-

quired parts and tools.



– Never try to replace the 48 volt lithium bat-

tery yourself. The 48 volt lithium battery in

this vehicle may only be replaced with a 48

volt lithium battery designed by Audi specif-

ically for this vehicle. Using other 48 volt

lithium or lead batteries will result in con-

siderable malfunctions or even total failure

of the electrical system.

 ^{Always wear eye protection.}

If electrolyte fluid enters the eyes, imme-



diately flush with clean water for several

minutes. Seek medical attention immedi-

ately.

– Never make modifications to the lithium

battery.

Fire, sparks, open flame, and smoking are



prohibited. Avoid creating sparks and

short circuits when handling cables and

electrical devices.

– Never open the 48 volt battery.

Charging the 12 volt vehicle battery

Always keep children away from battery



electrolyte fluid and the battery.

A highly explosive mixture of gases can



form when charging batteries.

WARNING

All work on the batteries must only be per-

formed by an authorized Audi dealer or au-

thorized Audi Service Facility.

– Gases that escape from these batteries can

be poisonous or flammable.

Fig. 166 Engine compartment: connectors for a charger or

jump start cables

– The contents of these batteries can be corro-

sive. If any battery contents come into con-

tact with the skin, flush the affected area

with clean water for at least 15 minutes.

Then wash the affected area with soap. Have

the affected area examined by a medical

professional.

Observe the safety precautions ðpage 237, Gen-

eral information, ð

in Battery general infor-

mation on page 250 and ð

.

Requirement: only use chargers with a maximum

charging current of 14.8 volts. The battery ca-

bles remain connected.



251

Checking and Filling

The charging cable connections are located in the

Tips

engine compartment. The ground point

ways located on the vehicle body.

–

is al-

Read all of the manufacturer's instructions

for the charger before charging the battery.

►

Turn off the ignition and all electrical equip-

ment.

Windshield washer

system

►

Open the hood ðpage 239.

Press the release lever on the positive terminal

and fold the cover upward ðfig. 166.

Clamp the terminal clamps on the charger cor-

►

rectly onto the positive terminal

+

and the

ground point – .

►

Insert the power cable for the charger into the

socket and turn on the charger.

Keep the hood completely open during the

charging session ð

.

At the end of the charging session, turn off the

charger and pull the power cable out of the

socket.

Fig. 167 Engine compartment: washer fluid reservoir cap

►

Remove the charger terminal clamps.

Close the cover on the positive terminal.

Close the hood ðpage 239.

Observe the safety precautions ðpage 237, Gen-

eral information.

The windshield washer fluid reservoir  contains

the cleaning solution for the windshield and the

headlight washer system* ðpage 240. The reser-

voir capacity can be found in ðpage 308.

WARNING

– Never use charging equipment that is un-

suitable, visibly damaged, and/or dirty.

Check the charging equipment for damage

before every use.

To reduce the risk of lime scale deposits on the

spray nozzles, use clean water with low amounts

of calcium. Always add window cleaner to the wa-

ter. When the outside temperatures are cold, an

anti-freezing agent should be added to the water

so that it does not freeze.

– Never connect a charging cable or jump

start cable directly to the 12 volt vehicle

battery. Only use the connections in the en-

gine compartment ðpage 251.

– A highly explosive mixture of gases can form

when charging batteries. Only charge the

battery in well-ventilated areas.

Messages

The following messages may appear, depending

on the vehicle equipment:

– A drained battery can freeze at tempera-

tures around 32 °F (0 °C). Do not charge or

use a frozen or thawed battery. If ice forms,

the battery housing can crack and battery

electrolyte fluid can leak, which increases

the risk of an explosion and chemical burns.

Contact an authorized Audi dealer or author-

ized Audi Service Facility for more informa-

tion.



Please add washer fluid

Fill the washer fluid for the windshield washer

system and the headlight washer system* when

the ignition is turned off.

Note

– The concentration of anti-freezing agent

must be adjusted to the vehicle operating

conditions and the climate. A concentration

that is too high can result in vehicle dam-

age.

– Leave the hood open while the 12 volt vehi-

cle battery is charging. If the hood is closed,

it could cause an electrical short circuit,

which increases the risk of fire.



252

Checking and Filling

– Never add radiator anti-freeze or other addi-

tives to the washer fluid.

Note

– Only reset the oil change indicator if the oil

was changed.

– Do not use a glass cleaner that contains

paint solvents, because this could damage

the paint.

– Regular service work on the vehicle is not

only beneficial for sustainable use of the ve-

hicle and retention of its value, but also for

operational and traffic safety. For this rea-

son, always have service work performed ac-

cording to the Audi guidelines.

Service interval display

The service interval display detects when your ve-

hicle is due for service.

– Even if the mileage on the vehicle is low, do

not exceed the time for the next service.

– Audi is not responsible for damage to the

vehicle that occurred due to inadequate

service or insufficient part availability.

The service interval display works in two stages:

– Inspection or oil change reminder: after driv-

ing a certain distance, a message appears in the

instrument cluster display each time the igni-

tion is turned on or off. The remaining distance

or time is displayed briefly.

– Inspection or oil change due: if your vehicle

has reached an inspection or oil change interval

or both intervals at the same time, the mes-

sage Inspection due! or Oil change due! or Oil

change and inspection due! appears briefly af-

ter turning the ignition on or off.

Checking service intervals

You can check the remaining distance or time un-

til the next oil change or next inspection in the

Infotainment system.

Applies to MMI: Select on the home screen: VEHI-

CLE > Settings & Service > Service intervals.

Resetting the indicator

An authorized Audi dealer or authorized Audi

Service Facility will reset the service interval dis-

play after performing service.

If you have changed the oil yourself, you must re-

set the oil change interval.

Applies to: MMI: To reset the display, select on

the home screen: VEHICLE > Settings & Service >

Service intervals.

WARNING

Inadequate service, a lack of service, or failing

to adhere to the service intervals can result in

the vehicle breaking down in traffic, acci-

dents, and serious injuries.

253

Checking and Filling for Your Audi A5 4 Door Third Generation (2025-2026)

Related Topics

Popular Owner Manuals

Latest Owner Manuals