2025-2026 Audi A5 4 Door Instrument cluster -> Vehicle functions User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Instrument cluster -> Vehicle functions for Your Audi A5 4 Door Third Generation (2025-2026)

Instrument cluster  
Opening sport displays in the MMI  
cause for concern as long as the  
tor lights do not turn on.  
or  
indica-  
Applies to: vehicles with Audi virtual cockpit  
►
Applies to: MMI: Select on the home screen:  
Boost indicator  
VEHICLE > Monitor.  
Browse to the desired display if necessary.  
►
Applies to: vehicles with boost indicator  
Depending on vehicle equipment, the current en-  
gine load (meaning the current boost pressure)  
may be indicated by a bar in the instrument clus-  
ter.  
G meter  
Applies to: vehicles with Audi virtual cockpit  
The G meter displays the longitudinal and lateral  
acceleration. The current values are displayed in  
the instrument cluster while driving. The maxi-  
mum values that are reached are stored and dis-  
played when the vehicle is stationary. Only the  
maximum values that are reached are displayed  
in the MMI.  
►
Applies to: vehicles with Audi virtual cockpit:  
Open the vehicle functions tab and switch to  
the enhanced view ðpage 16.  
►
Applies to: vehicles with analog instrument  
cluster: Open the lap timer ðpage 136.  
►
To reset the stored values, press and hold the  
Shift light indicator  
left thumbwheel on the multifunction steering  
wheel for one second.  
Applies to: RS models  
The shift light indicator indicates when the RPM  
limit is reached.  
Tire pressure  
The tire pressure monitoring system displays the  
current tire pressures and temperatures. Also see  
ðpage 274, Tire pressure monitoring system.  
►
Applies to: vehicles with Audi virtual cockpit:  
Set the Performance layout. Depending on the  
layout, you can also set Runway ðpage 16.  
Engine data  
Applies to: vehicles with Audi virtual cockpit  
►
Applies to: vehicles with analog instrument  
cluster: Open the lap timer ðpage 136.  
The engine data in the instrument cluster shows  
which percentage of the maximum output or  
maximum torque is currently being used.  
The shift light indicator is displayed with green,  
yellow and red ranges in the upper areas of the  
tachometer. The shift light indicator will blink red  
when approaching the engine speed limit. Shift  
to the next highest gear at the right time.  
Temperature  
The temperature display in the MMI shows the  
temperature of various fluids and vehicle compo-  
nents, such as the engine oil or sport differential.  
Sport displays  
Applies to: RS models  
Vehicle functions  
Various sport displays, such as a G meter or tire  
pressure indicator, may be available depending  
on vehicle equipment.  
Overview  
The trip computer is displayed in the first tab of  
the driver information system. Additional vehicle  
functions can be accessed depending on the vehi-  
cle equipment.  
Opening sport displays in the instrument  
cluster  
Applies to: vehicles with Audi virtual cockpit  
►
Select in the instrument cluster: Vehicle func-  
►
Press the button on the multifunction steer-  
tions tab > button > Sport displays.  
►
ing wheel.  
Turn the left thumbwheel on the multifunction  
steering wheel until the desired sport display  
appears in the instrument cluster.  
– Trip computer ðpage 20  
– Sport displays ðpage 19  
– Lap times ðpage 136  
19  
Instrument cluster  
– Lap statistics ðpage 137  
lect the time period for evaluating trip informa-  
tion yourself.  
– Acceleration measurement ðpage 137  
– Reduced display ðpage 17  
Average consumption  
The current consumption can be shown using a  
bar graph. The average consumption stored in  
the short-term memory is also displayed. If the  
bar is green, your vehicle is saving fuel (for exam-  
ple, using recuperation).  
On-board computer  
Changing the display  
►
Turn the left thumbwheel on the multifunction  
steering wheel 7 ðpage 16, fig. 6 until the  
desired display is shown.  
Energy consumers  
Resetting values to zero  
The Energy consumers view lists other equip-  
ment that is currently affecting fuel consump-  
tion. The display shows up to three equipment  
items. The equipment using the most power is  
listed first. If more than three items using power  
are turned on, the equipment that is currently  
using the most power is displayed. A gauge also  
shows the current total consumption of all other  
equipment.  
Requirement: the Consumption, Short-term  
memory, or Long-term memory display must be  
selected.  
►
To reset the values in one of the memories to  
zero, press and hold the left thumbwheel on  
the multifunction steering wheel for one sec-  
ond, or  
►
Select on the instrument cluster: vehicle func-  
tions tab > button > Reset mi.  
Tips  
The date, time of day, and time and date for-  
mat can be set ðpage 230.  
Displays in the trip computer  
The following displays may be shown, depending  
on the vehicle equipment:  
– Time and date ðpage 230  
– Level  
– Digital speedometer  
– Average consumption ðpage 20  
– Range  
– Short-term memory overview  
– Long-term memory overview  
– Energy consumers ðpage 20  
– Driver assistance ðpage 144  
– Traffic sign recognition and traffic light infor-  
mation  
Short-term memory and long-term memory  
The short-term memory collects driving informa-  
tion from the time the ignition is turned on until  
it is turned off. If you continue driving within two  
hours after turning off the ignition, the new val-  
ues will be included when calculating the current  
trip information.  
Unlike the short-term memory, the long-term  
memory is not erased automatically. You can se-  
20  

Related Topics

Instrument cluster
Instrument cluster overview Operating Adjusting the display Coolant temperature display Tachometer Odometer Outside temperature display Engine oil temperature indicator Boost indicator Shift light indicator Sport displays

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot