Get Navigation Guide for Audi A5 4 Door Third Generation (2025-2026)

Navigation

the traffic regulations that are applicable in

the country where you are operating the ve-

hicle. In the event that the driving directions

contradict traffic regulations, always follow

the traffic regulations applicable in the

country where you are operating the vehicle

to reduce the risk of an accident.

Opening navigation

Applies to: vehicles with navigation system

Note

Read the information about Audi connect, es-

pecially regarding connectivity costs ð in

General information on page 187.

Fig. 142 Route guidance not started

The navigation system directs you to your desti-

nation, around traffic incidents, and on alterna-

tive routes, if desired.

Tips

– Snow and objects on the GPS antenna or

trees and large buildings can impair satel-

lite reception and affect the system's ability

to determine the vehicle position. Several

deactivated or malfunctioning satellites can

interrupt GPS reception.

Opening navigation

►

Applies to: MMI: Press NAVIGATION on the

home screen.

After accessing the navigation for the first time,

the map is displayed.

– Because street names sometimes change,

the names stored in the MMI may in rare

cases differ from the actual street name.

– Applies to: multifunction steering wheel:

Depending on the selected function, opera-

tion through the MMI may be required.

– Applies to: vehicles with Audi connect Info-

tainment: Depending on the country and ve-

hicle equipment, additional services may be

available.

Opening navigation using the multifunction

steering wheel

►

Select the Navigation tab in the instrument

cluster.

►

To display navigation when route guidance has

started, select in the instrument cluster: the

 button > Map.

– An additional indicator will appear in the

head-up display*.

The following functions are available in the MMI:

1

2

Select destination ðpage 199.

Searching for navigation destinations

myAudi navigation

ðpage 198.

Applies to: vehicles with myAudi navigation

3

Switch between the map and the menu:

press  repeatedly until the desired function

is displayed.

MMI navigation works seamlessly with the myAu-

di app.

You can find additional information about the

map update at ðpage 202, Map operation.

Your destinations (favorites, last destinations)

are synchronized through your myAudi account.

All important destinations can be displayed in

the vehicle and in the myAudi app.

WARNING

– The demands of traffic require full attention

of all road users. Always read the chapter

ðpage 23, Information about traffic safety.

– The route calculated by the navigation sys-

tem is a driving recommendation. Follow

To load destinations in the vehicle automatically,

Audi recommends logging into the vehicle with a

myAudi user ðpage 33.



197

Navigation

►

myAudi navigation functions:

Enter one or more search terms into the input

field.

The search engine provider shows suggestions

 to narrow down the search.

Press on suggestions, if available, until the de-

sired destination appears in the results list. If

necessary, use one finger to swipe upward or

downward until the suggestions  or destina-

tions  appear.

Press on the desired destination . Route guid-

ance will start.

To open the Details ðpage 200 menu, press

.

– You can send destinations and routes from the

myAudi app to the vehicle ðpage 200.

– Active route guidance in the myAudi app can be

continued in the MMI.

– Depending on the situation, it may be possible

to continue active route guidance from the MMI

in the myAudi app to continue navigating to the

destination after leaving the vehicle.

►

Tips

– All services/apps can be modified, activat-

ed/deactivated, renamed, and enhanced

without further notification.

Hybrid search

– Depending on the country and model there

may be an app other than the “myAudi app”

available for your vehicle. For additional in-

formation, see my.audi.com.

If the  symbol is displayed in color in the MMI,

then the hybrid search is turned off.

►

To turn on the hybrid search, press the colored

 symbol.

Requirement: hybrid search is turned on.

Entering a destination

►

Enter one or more search terms into the input

Searching for navigation destinations

field ðpage 27, Text input.

Applies to: vehicles with navigation system

►

Press on the desired destination in the results

list. Route guidance will start.

To open the Details ðpage 200 menu, press

.

Different search options will be available depend-

ing on the country and vehicle equipment:

►

Using the online search option, you can use the

results from a search engine provider to find a

navigation destination.

Online Points of Interest

►

Searching for points of interest: enter the

name of a POI.

Select: a symbol for a POI category (such as

 ) > a POI, or

To display all categories and search for a POI,

select:  > a category (such as restaurants) >

a POI.

Using the hybrid search option, you can enter the

data for a navigation destination in any order all

at once (for example, 5th Avenue New York).

Likewise, you can search for points of interest or

contacts in order to navigate to the desired desti-

nation.

►

Change search area

Opening a menu

Requirement: route guidance must be active.

►

Applies to: MMI: Select on the home screen:

NAVIGATION > .

►

Applies to: MMI: Select on the home screen:

NAVIGATION > .

To change the search area, press  /  /  re-

1)

Online search

►

Applies to: vehicles with navigation system and online search

peatedly until the desired search area is select-

ed.

Requirement: the MMI must be connected to the

Internet ðpage 187, Audi connect.



1)

Audi provides access to services from third party provid-

ers. Permanent availability cannot be guaranteed, because

that depends on the third party provider.

198

Navigation

As soon as you start route guidance, the destina-

tion is automatically saved in the last destina-

tions. Your previous destinations are marked with

the  symbol.

Tips

– The MMI input suggestions depend on the

last navigated destinations.

– The navigation system always searches for

the fastest route. You can have alternative

routes displayed if necessary ðpage 204.

– If the destination cannot be found, it may

not be stored in the navigation database.

Check the spelling of the term that was

searched or check the search area

If you use myAudi navigation, your previous desti-

nations will be synchronized with your myAudi

account ðpage 197.

Accessing previous destinations

►

Applies to: MMI: Select on the home screen:

NAVIGATION > () > Last destinations > select

a destination > Start.

ðpage 198.

– Distances to points of interest are displayed

as a straight-line distance from your current

location. The actual distance from your cur-

rent location to the point of interest is up-

dated automatically. The list of points of in-

terest that were found is not resorted when

this happens.

►

Select in the instrument cluster: Navigation tab

>  button > Last destinations > a destina-

tion.

Deleting previous destinations

►

Applies to: MMI: Select on the home screen:

NAVIGATION > () > Last destinations >  >

select one or more entries or Select all > Delete

> (Done).

Select destination

Applies to: vehicles with navigation system

Tips

The last route will be automatically deleted

from the list if you start a new route guidance

after canceling the route.

Setting a favorite as the destination

Applies to: vehicles with navigation system

Fig. 143 Menu: select destination

In the favorites, you can call up frequently-used

destinations as well as your home/business ad-

dress.

Opening a menu

►

Applies to: MMI: Press NAVIGATION on the

home screen.

If the map is displayed, press  1 ðpage 197,

fig. 142.

Requirement: a favorite must be stored

ðpage 204.

►

Applies to: MMI: Select on the home screen:

The following functions are available:

NAVIGATION > () > Favorites > select a desti-

nation.

Select in the instrument cluster: Navigation tab

1

2

3

4

Last destinations . . . . . . . . . . . . . .

Favorites . . . . . . . . . . . . . . . . . . . . .

Contacts . . . . . . . . . . . . . . . . . . . . .

Received destinations and routes .

199

200

►

>  button > Favorites > a destination.

Selecting contacts as destinations

Applies to: vehicles with navigation system

Loading previous destinations

Applies to: vehicles with navigation system

You can navigate to contacts.

Your last destinations and routes can be loaded

as a navigation destination.

Requirement: a contact must have an address

stored.



199

Navigation

►

Applies to: MMI: Select on the home screen:

Destination details

NAVIGATION > () > Contacts > a contact.

Applies to: vehicles with navigation system

►

Press on the address for a contact.

►

Press on a suggested address. The Details

menu will be displayed.

Tips

– If a contact is grayed out, there is no ad-

dress stored for that contact.

– Navigation to geographical coordinates for

a contact is not possible.

Fig. 144 Details

The functions depend on the vehicle equipment

and the selected destination.

Loading received destinations and routes

Applies to: vehicles with myAudi navigation

1

Map preview: to zoom in on the map pre-

view, press on the map.

You can search for destinations or routes in the

myAudi app and send to the vehicle.

2

3

4

Route criteria: see ðpage 208.

More: additional functions.

Requirement: the MMI and the mobile device

must be connected to the Internet ðpage 187,

Audi connect. You must have the myAudi app in-

stalled on your mobile device.

Weather: Requirement: the MMI must be

connected to the Internet ðpage 187, Audi

connect. Also see ðpage 189.

5

Call: Requirement: a mobile device must be

connected to the MMI ðpage 175. You will

make a call to the phone number that is stor-

ed for the destination.

►

Send a destination or route in the myAudi app

to the vehicle.

►

Applies to: MMI: Select on the home screen:

NAVIGATION > () > Received destinations

and routes.

Make sure you are logged into the vehicle and

the myAudi app with the same myAudi account.

The received destination and routes will be

loaded automatically.

Navigating to a destination: press on a desti-

nation.

Deleting destinations: select:  > one or more

entries or Select all > Delete > (Done).

6

7

8

Start: starts navigation to the displayed des-

tination. The map will be displayed

ðpage 202.

►

Parking: press Parking to search for a park-

ing space at the destination. You can use the

parking space as a destination or stopover.

►

Details: Requirement: the MMI must be con-

nected to the Internet ðpage 187, Audi con-

nect.

►

9

Display of distance/driving time to the des-

tination

Tips

10

Weather at the destination: Requirement:

the MMI must be connected to the Internet

ðpage 187, Audi connect.

– All services/apps can be modified, activat-

ed/deactivated, renamed, and enhanced

without further notification.

– Depending on the country and model there

may be an app other than the “myAudi app”

available for your vehicle. For additional in-

formation, see my.audi.com.

Selecting a destination from the map

Applies to: vehicles with navigation system

A point on the map can be used as the destina-

tion.



200

Navigation

►

Opening the map

Deleting a stopover: Select:  > one or more

entries or Select all > Delete > (Done).

►

Applies to: MMI: Press NAVIGATION on the

home screen.

Stopping route guidance

►

If necessary, press  to display the map.

Applies to: vehicles with navigation system

Adjusting the scale

Requirement: route guidance must be active and

the map must be displayed.

►

Select: / > select a scale.

Marking the destination

►

Applies to: MMI: Press  ðpage 201, fig. 145.

►

Select in the instrument cluster: Navigation tab

►

Press and hold a point on the map until a mark-

>  button > Cancel route guidance.

ing appears or the address for the selected des-

tination is shown.

Map

Selecting map content (such as POIs) as the

destination

Map functions

Applies to: vehicles with navigation system

Requirement: map content must be displayed

ðpage 207.

►

Press on map content on the map (for example,

).

Selecting the destination

►

Select:  > Start.

Fig. 145 Active route guidance

Stopovers and route plan

Applies to: vehicles with navigation system

You can enter additional destinations during ac-

tive route guidance.

Entering a stopover

Requirement: route guidance must be active.

►

Fig. 146 Marked map object

Enter a destination ðpage 198.

Displaying stopovers or the route plan

Opening the map

All destinations are listed in the route plan.

►

Applies to: MMI: Press NAVIGATION on the

home screen.

If necessary, press  to display the map.

►

Press on  in the side menu on the map

ðpage 201, fig. 145.

►

The following list gives an overview of the infor-

mation displayed on the map. Press on any func-

tion (for example, alternative routes) to show ad-

ditional options.

Editing stopovers

►

Press on  in the side menu on the map

ðpage 201, fig. 145.

►

Adding a stopover: Select: Add destination >

1

2

3

4

5

Select destination ðpage 199

Entering a destination ðpage 198

Cancel route guidance ðpage 201

Current route

select a destination > Add to route.

►

Moving a stopover: press . Touch the  sym-

bol and move the entry to the desired position.

Press Done.

Request spoken prompt



201

Navigation

Additional possible symbols on the map

6

7

Alternative routes ðpage 204

Display active destinations, stopovers, or

route plan ðpage 201. The distance to the

next destination in the route plan including

the calculated arrival time is displayed

Symbol

Description



Home address ðpage 204, Favor-

ites



Business address ðpage 204, Fa-

8

9

Traffic information online ðpage 206

vorites

Altitude



Favorites ðpage 204

1)

10

Displays the maximum permitted speed

within city limits, on expressways, and on

highways

:



Previous destinations display

Traffic information

11

12

13

14

Current vehicle position

– Colored warning symbols: traffic incidents

ahead that are on your route.

Route information ðpage 208

Name of the street on which you are driving

– Grayed out warning symbols: traffic incidents

that are not on your route.

Start route guidance for a marked destina-

tion ðpage 200, Selecting a destination

from the map

– All traffic incidents will display in color when

route guidance is inactive.

15

Display details for the destination

ðpage 200

– Warning symbols with arrow: traffic incident

that you have been routed around, for example

.

16

17

Search nearby ðpage 198

Adjust the map orientation. See also

ðpage 207

Map operation

18

19

Settings ðpage 207

Applies to: vehicles with navigation system

Adjust the scale. Press the magnifying glass

to turn automatic zoom ðpage 207 on the

map on or off. The  symbol appears when

this function is turned on

You can operate the map ðpage 201, fig. 145

with the movements described in the following

information.

Moving the map

20

21

Marked destination ðpage 200, Selecting a

destination from the map

►

Drag your finger across the map in the desired

Map contents (points of interest, favorites).

When there are multiple map contents in the

immediate vicinity, the symbols are shown

stacked on the map. To display a list of indi-

vidual symbols, press  ðfig. 146. Press on

a POI in the list

direction.

Moving the map quickly

►

Swipe your finger across the map in the desired

direction and lift your finger off the map.

Zooming in on the map

22

23

Center the map to the current vehicle posi-

tion

►

Place two fingers on the map and pull your fin-

gers apart, or

Traffic incidents and display of estimated

losses of time on the route

►

Double-tap on the map with one finger.

– Green: traffic is flowing freely.

– Orange: stop-and-go traffic

Zooming out on the map

►

Place two fingers on the map and pull your fin-

– Red: traffic jam or traffic obstructions.

gers together, or

►

Double-tap on the map with two fingers.



1)

Applies to vehicles without camera-based traffic sign rec-

ognition.

202

Navigation

Rotating the map

Predictive route

guidance

►

Rotate the map using two fingers.

Applies to: vehicles with navigation system and predictive

route guidance

Tilting the map

►

Drag upward or downward with two fingers.

Your MMI can learn the routes that you drive fre-

quently (such as your daily commute to work and

back) and suggest route guidance based on the

current vehicle position.

Tips

Certain gestures may not be available on all

touch displays or in every menu.

When the function is turned on, the MMI records

the routes driven regardless of whether or not

you are using navigation.

Navigation view with route guidance

started

Without starting route guidance, your MMI can

check the traffic conditions and show possible

traffic incidents for the possible routes to be driv-

en.

Applies to: vehicles with navigation system and Audi virtual

cockpit

Opening personal routes

Requirement: predictive route guidance is turned

on ðpage 208. Route guidance must not be ac-

tive. A notification is displayed.

►

The MMI displays up to three suggestions.

Press on a suggestion. Route guidance will

start.

Fig. 147 Instrument cluster: default view: turning maneu-

ver when route guidance has started

Better routes

Requirement: route guidance must be on

ðpage 198.

If there are major traffic incidents, the MMI will

display a notification regardless of the selected

menu. If the MMI has calculated a better route,

you can select it as the route.

The following information will be displayed in the

driver information system, if available:

►

1

2

Current vehicle position

Press on the notification.

A bar graph appears when there is an upcom-

ing turn. The fewer the bars that are shown,

the shorter the distance is until the turn. If

there is no upcoming turn immediately

ahead, the distance to the destination or

stopover, the calculated arrival time, and a

direction arrow for the upcoming maneuver

will be displayed in the right speedometer. If

there is no upcoming maneuver, the distance

to the next maneuver will be displayed.

As soon as you turn off predictive route guidance,

your personal routes will no longer be recorded.

Routes that were already stored will remain stor-

ed.

Deleting personal routes

►

Applies to: MMI: Select on the home screen:

NAVIGATION >  > Predictive route guidance

> Delete recordings from the last 24 hours or

Delete all personal routes and destinations.

3

Lane recommendation

Tips

If the predictive route guidance is turned off

and you press , the predictive route guid-

ance settings will be displayed ðpage 208.

203

Navigation

►

Press and hold the information window for the

corresponding alternative route (for example,

2 ðfig. 148).

Alternative routes

Applies to: vehicles with navigation system

Select route

►

Press on the information window for the corre-

sponding route (for example 2 ).

Additional functions

Fig. 148 Alternative routes in the overview map

Favorites

Applies to: vehicles with navigation system

Opening alternative routes

In the favorites, you can call up frequently-used

destinations as well as your home/business ad-

dress.

Requirement: route guidance must be started

ðpage 198 and the map must be displayed

ðpage 202.

Accessing favorites

►

Press on  in the side menu on the map

►

ðpage 201, fig. 145.

Applies to: MMI: Select on the home screen:

NAVIGATION > () > Favorites.

1 Current route

If you use myAudi navigation, your favorites will

be synchronized with your myAudi account

ðpage 197.

The distance to the destination and the calculat-

ed arrival time will be displayed for the current

route.

Storing favorites

2 Alternative route

►

Press  in the Details menu ðpage 200,

The difference in travel time compared to the se-

lected route will be displayed.

fig. 144.

Storing a home address or business address

3 Block route

►

Press Home address or Business address.

You can block the current route for a certain dis-

tance starting from the vehicle position, for ex-

ample to drive around upcoming streets or tun-

nel closures. The navigation system automatical-

ly calculates an alternative route and the length

of the blocked route. The route to be avoided

that you have entered applies only to the current

route and must be set again, if needed. The areas

you have selected to avoid will appear with red

and white shading on the map.

When accessed for the first time, you will be

prompted to set the address.

Select: Create now > enter a destination > OK.

►

Editing a home address or business address

Requirement: the favorites list must be dis-

played. Your home address or business address

must be stored.

►

Press Home address or Business address until

the Options menu is displayed.

Select: Change address > enter a destination >

(Set as destination) or (Add to address) > OK.

►

Block route: press 3 ðfig. 148.

Cancel route block: press .

►

Displaying alternative routes in the

foreground

Editing favorites

Requirement: the favorites list must be dis-

played.

►

Press  in the corresponding information win-

dow, or

►

Setting a favorite as a destination: press on a

favorite.



204

Navigation

►

Deleting favorites: in the Details menu, press

 ðpage 200, fig. 144, or select:  > one or

more entries or Select all > Delete > (Done).

Moving a favorite: press . Touch the  sym-

bol and move the entry to the desired position.

Press Done.

Satellite map

Applies to: vehicles with navigation system and satellite map

You can display the navigation map with satellite

images.

Requirement: the MMI must be connected to the

Internet ðpage 187, Audi connect.

Tips

►

Applies to: MMI: Select on the home screen:

– After deleting the home address or business

address, only the address is deleted and the

entry will still be displayed in the favorites.

– Please note when moving favorites that

items 1 and 2 are reserved for the home ad-

dress and business address.

NAVIGATION >  > Map settings > Satellite

1)

map

.

The map view is based on data packets received

from the Internet in the form of satellite images,

which are then combined with the roadways from

the ðpage 201, fig. 145 standard map view.

On-street parking

Applies to: vehicles with navigation system and on-street

parking

Tips

1)

– The satellite map is updated regularly

whenever the function is opened. The proc-

ess may take several seconds.

In supported areas, you can display parking along

the route.

– Depending on the Internet connection, the

Requirement: the Parking notification must be

turned on ðpage 26, Notification center. The

MMI must be connected to the Internet

standard map may also be displayed when

1)

the satellite map is turned on

.

ðpage 187, Audi connect. Route guidance must

be active, you must be close to your destination,

and a notification must be displayed or an item

on the map must be marked.

Map update

Introduction

Applies to: vehicles with navigation system

►

Press on the notification, or

Press  on the map.

To navigate to a parking: space, press on a col-

You can update the map data in the MMI with a

map update. The functions depend on the coun-

try and vehicle equipment.

►

ored marking on the map.

Select:  > Start.

– Map update using the Online map update

ðpage 205.

►

– Import a map update from the USB connection

to your MMI ðpage 206.

Depending on availability, colored markings on

the map indicate the probability of open parking

spaces.

Online map update

Applies to: vehicles with online map update

Color

Green

Description

High probability

Medium probability

Low probability

You can update the map content for the naviga-

tion system in your vehicle using the online map

update function.

Orange

Red



1)

Audi provides access to services from third party provid-

ers. Permanent availability cannot be guaranteed, because

that depends on the third party provider.

205

Navigation

►

The MMI determines regions based on the vehicle

position. Based on this, update data for these re-

gions are available for your MMI.

Press Next. The status of the installation is

shown in the display.

Traffic information

Starting the update

Introduction

Requirement: the MMI must be connected to the

Applies to: vehicles with navigation system and traffic infor-

mation online

Internet ðpage 187, Audi connect.

►

Applies to: MMI: To allow automatic online map

updates, select on the home screen: SETTINGS

> System maintenance > Automatic online

map update. The MMI starts the map update

automatically in the background when new

map material is available.

You can check the status of the download process

and the installation in the notification center

ðpage 26.

Fig. 149 Traffic information overview

Open traffic information

Note

Requirement: the map must be displayed

ðpage 202.

Read the information about Audi connect, es-

pecially regarding connectivity costs ð in

General information on page 187.

►

Press on the traffic jam symbol in the side

menu on the map ðpage 201, fig. 145.

Tips

Display traffic report details

►

Because of the high volume of data, Audi rec-

ommends performing the map update using

the USB connection ðpage 206.

Press on the traffic report 2 .

To display the previous or next traffic report,

press  or .

►

The following information can be displayed:

Map update using the USB connection

Applies to: vehicle with map updates using the USB connec-

tion

1

A message will appear if the MMI calculates a

better route for the current route guidance.

The predicted delay takes into account future

changes to the traffic situation on the route.

Press on an item in a list 1 and select the

better route. More information can be found

under ðpage 204.

With the map update, you can update the map

material in your navigation system.

Requirement: you must have created a myAudi

account at my.audi.com. Your vehicle must be

registered in your myAudi account.

2

3

A traffic message is displayed. The distance

to the hazardous area is calculated from the

current vehicle position.

Downloading updates

►

Download the map update at my.audi.com and

The traffic messages are only shown when

route guidance is active. Press on a line to

display details about it.

store it on a USB flash drive. For additional in-

formation, visit my.audi.com.

Installing updates

Tips

►

Connect the USB flash drive to the USB port

– Particularly critical traffic information, such

as warnings about wrong-way drivers, is au-

tomatically displayed as a notification.

with charging function ðpage 218.

Open the notification in the notification center

on ðpage 26 and press on the notification.

►



206

Navigation

– Traffic information is not available in some

countries.

Tips

– Having the traffic information online func-

tion turned on provides the most accurate

reports of traffic situations and traffic fore-

casting. Your vehicle transmits and process-

es its anonymous, encrypted position infor-

mation at regular intervals to the traffic da-

ta provider. You can turn off data transfer at

any time ðpage 302.

Traffic rerouting

Applies to: vehicles with navigation system

By receiving traffic information, your MMI calcu-

lates a better route if available and the possible

time saved compared to the current route.

Traffic rerouting

– The traffic information online network is

not available in all countries, and the cover-

age is not nationwide.

►

Start route guidance.

The MMI uses a notification or a note in the traf-

fic information 1 ðpage 206, fig. 149 to indi-

cate a better route. You can decide which route

you would like to use.

Settings

Applies to: vehicles with navigation system

You can adjust the navigation system settings in

the instrument cluster and in the MMI display

separately. The settings depend on the country

and vehicle equipment.

To select a better route, you have the following

options:

►

Notification: press . The better route will be

used for route guidance, or press on the notifi-

cation. Press on the information window for the

better route (for example 2 ðpage 204,

fig. 148).

Accessing settings

►

Applies to: MMI: Select on the home screen:

NAVIGATION > .

►

Note in the traffic information: press on the

list entry 1 ðpage 206, fig. 149. Press on the

information window for the better route (for

example 2 ðpage 204, fig. 148).

Accessing settings using the multifunction

steering wheel

►

Select in the instrument cluster: Navigation tab

>  button.

Traffic information online

Applies to: vehicles with navigation system and traffic infor-

mation online

A setting made using the multifunction steering

wheel only applies to the instrument cluster

map.

The MMI can receive real-time online traffic infor-

mation about congestion, accidents, road con-

struction, and other incidents.

Map settings

Satellite map: see ðpage 205.

Requirement: the MMI must be connected to the

Internet ðpage 187, Audi connect. Traffic infor-

mation must be turned on in the MMI

ðpage 207.

Traffic info: you can display current traffic infor-

mation on the map.

– Free flowing traffic

– Traffic obstructions

– Traffic information

Traffic information will be displayed on the

standard map ðpage 201, fig. 145.

Map colors

Depending on vehicle equipment, online traffic

information may also be displayed on the satel-

lite map ðpage 205.

– Automatic: the map display adapts to the light-

ing conditions (for example, by changing from

day to night when driving through a tunnel).

– Day or Night



207

Navigation

Map orientation

Ferries

– 2D heading-up map/2D north-up map: the

current vehicle position is displayed. The map is

oriented in the direction of travel or to the

north.

Route information

When this function is turned on and route guid-

ance is active, route information ðpage 201,

fig. 145 is displayed. The next maneuver will be

displayed at the bottom. POIs and traffic infor-

mation will also be displayed. Press route infor-

mation to display a preview of the next maneuver

on the map. You can turn the following informa-

tion on or off in route information.

– 3D heading up map: the current vehicle posi-

tion is shown on a three-dimensional map and

is aligned to the direction of travel.

– Overview: the entire route from the vehicle po-

sition to the destination or the next stopover is

displayed on the map. The map is oriented to

the north.

– Points of interest along the route

– Traffic information along the route

Automatic zoom

Use hybrid search as the default

– On: the map scale is adapted automatically de-

pending on the type of road being traveled (ex-

pressway, highway, other roads) so that you al-

ways have an optimal overview of the road

ahead. When route guidance is active, the scale

is adjusted automatically for a better detailed

view when there are upcoming maneuvers.

– Intersection: when route guidance is active, the

scale is adjusted automatically for a better de-

tailed view when there are upcoming maneu-

vers.

When this function is turned on, the hybrid

search will be used as the default for the destina-

tion search.

Predictive route guidance

The predictive route guidance is turned off when

the vehicle is delivered from the factory.

Your trips are recorded and destinations are sug-

gested by the MMI when this function is turned

on ðpage 203.

– Off

Presentation mode

MMI map contents/Map content: you can turn

the display of additional information (such as

POIs) on the map in the center display on or off.

In presentation mode, the system simulates driv-

ing on the display along the planned route with-

out the vehicle actually moving. You can use

Specify starting point when you would like to

calculate a route starting from a location other

than the current vehicle position, for example.

Simulating route guidance: start route guidance

and press presentation mode.

Voice guidance

Voice guidance: with the Traffic info setting, the

MMI will only give prompts if there are traffic in-

cidents on your route.

Voice guidance during phone call

Entertainment fader during navigation: the au-

dio playback volume is temporarily lowered when

navigation prompts are active.

Tips

You can change the volume of navigation an-

nouncements while one is playing ðpage 32.

Route criteria

You can adjust which route criteria should be al-

lowed or avoided for the route calculation.

HOV/carpool lanes

Highways

Toll roads

208

Navigation for Your Audi A5 4 Door Third Generation (2025-2026)

Related Topics

Popular Owner Manuals

Latest Owner Manuals