Personalization
Personalization
Users
ment system settings and vehicle settings at
all times.
Tips
General information
Applies to: vehicles with personalized user settings
– Certain Infotainment and vehicle settings
(such as mirrors, last radio stations) may be
stored, depending on vehicle equipment.
You can find additional information in the
MMI. Select on the home screen: SETTINGS
> General > Legal notes > About Audi con-
nect.
Depending on vehicle equipment and your coun-
try, your vehicle may be able to manage different
users in the MMI. Each user will be assigned the
settings that they last used.
Before you begin driving, you can select a user in
the MMI and load personalized Infotainment and
vehicle settings.
– Applies to: myAudi users: The stored set-
tings can only be transferred to vehicles
that are capable of receiving the transmit-
ted information. There may be restrictions
that prevent this, particularly in other coun-
tries.
Possible users in the MMI:
– myAudi user: as a myAudi user, you can use
Audi connect services that require a myAudi ac-
count. Certain settings are transferred online
to your myAudi account. If you log into your
myAudi account in another vehicle, you can
load your settings in the other vehicle.
– Applies to: myAudi users: The settings can
only be transferred and loaded when there
is coverage from the applicable mobile
phone service provider.
– Local user: as a local user, you can only store
settings in the current vehicle. Your settings
cannot be transferred to other vehicles. Audi
connect services that can only be used with a
myAudi account will not be available.
– Applies to: myAudi users with PIN protec-
tion turned on: If the MMI displays a detect-
ed user but you simply start driving or wait
without entering the 4-digit PIN, then the
guest user will be selected. Some settings
for the detected myAudi user will be trans-
ferred to the guest user.
– Guest user: as a guest user, you can store set-
tings in the vehicle without changing the set-
tings for other users. Audi recommends only
using the guest user temporarily, because set-
tings can be overwritten by other users.
User management
Applies to: vehicles with user management
Depending on vehicle equipment, the following
options may be used to detect the active user so
that the user settings can be loaded automatical-
ly before you start driving.
Opening user management
Applies to: MMI
►
Press USERS on the home screen.
– Vehicle key
Selecting a user
Applies to: MMI
Requirement: the driver's door has been opened.
►
Press on the desired user.
Enter the 4-digit myAudi PIN, if necessary.
The detected user must be shown in the MMI.
Confirm the user shown, select another user
ðpage 33, or add another user ðpage 33.
►
Adding myAudi users
Applies to: MMI and Audi connect
WARNING
Requirement: you must have successfully regis-
tered at my.audi.com and have created a 4-digit
myAudi PIN.
It may not be possible to load Infotainment
and vehicle settings, or they may only load
partially. To reduce the risk of an accident, the
driver must be responsible for the Infotain-
►
Press Add user.
33
English 
