2018-2026 Audi Q8 SUV Assist systems -> General information User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Assist systems -> General information for Your Audi Q8 SUV First Generation (2018-2026)

Assist systems  
System limitations  
Observe the limitations of the assist systems,  
Assist systems  
General information  
Safety precautions  
sensors, and cameras ð  
.
WARNING  
Observe the safety information for the assist sys-  
The use of an assist system cannot over-  
come the natural laws of physics. A collision  
cannot be prevented in certain circumstan-  
ces.  
tems, sensors, and cameras ð  
.
WARNING  
As the driver, you have complete responsi-  
bility for all driving operations at all times.  
The assist systems cannot replace the driv-  
er's attention. Give your full attention to  
driving the vehicle, and be ready to inter-  
vene in the traffic situation at all times.  
Activate the assist systems only if the sur-  
rounding conditions permit it. Always adapt  
your driving style to the current visual,  
weather, road, and traffic conditions.  
Loose objects can be thrown around the ve-  
hicle interior during sudden driving or brak-  
ing maneuvers, which increases the risk of  
an accident. Store objects securely while  
driving.  
Warnings, messages, or indicator lights may  
not be displayed or initiated on time or cor-  
rectly, for example, if vehicles are approach-  
ing very fast.  
Corrective interventions by the assist sys-  
tems, such as steering or braking interven-  
tions, may not be sufficient or they may not  
occur. Always be ready to intervene.  
Tips  
Due to the system limitations when detect-  
ing the surrounding area, the systems may  
warn or intervene unexpectedly or too late  
in certain situations. The assist systems may  
also interpret a driving maneuver incorrectly  
and then warn or intervene unexpectedly.  
The systems may not function as expected  
in unusual driving situations, such as driving  
offroad, on unpaved roads, on loose ground,  
on inclines, or on grooves in the road.  
The systems may not function correctly in  
unclear traffic situations, such as turn lanes,  
exit ramps, construction zones, rises or dips  
that obstruct visibility, intersections, traffic  
circles, toll booths, or city traffic.  
For the assist systems to be able to respond  
correctly, the function of the sensors and  
cameras must not be restricted. Note the in-  
formation on sensors and cameras  
ðpage 128.  
Tips  
Pay attention to applicable local regulations  
relating to driving tasks, leaving space for  
emergency vehicles, vehicle distance, speed,  
parking location, wheel placement, etc. The  
driver is always responsible for following  
the laws that are applicable in the location  
where the vehicle is being operated.  
The detection of the surrounding area can  
be limited, for example by vehicles traveling  
ahead or by rain, snow, heavy spray, or light  
shining into the camera.  
You can cancel a steering or braking inter-  
vention by the system by braking or acceler-  
ating noticeably, steering, or deactivating  
the respective assist system.  
In trailer mode, some assist systems may be  
limited, may not respond as usual, or may  
be unavailable. Please refer to the instruc-  
tions for towing a trailer located in  
Always check the assist systems settings be-  
fore driving. The settings may have been  
changed, for example by turning off the ig-  
nition or by other persons.  
ðpage 122.  
The steering wheel touch recognition may  
be limited when you wear gloves. Steering  
intervention requests from the steering as-  
sist systems may occur more frequently.  
127  
Assist systems  
If accessories have been mounted on the  
steering wheel, the steering assist systems  
may be limited. The frequency of steering  
intervention requests from the steering as-  
sist systems may vary as well.  
General messages  
Driver assistance systems: currently limited. Af-  
fected systems will be continuously updated in  
message memory  
Fig. 90 Rearview camera coverage area  
The assist systems analyze the data from various  
sensors and cameras installed in the vehicle. Do  
not use any assist systems if there is damage in  
the area of the sensors and cameras or on the ve-  
hicle underbody. Damage can impair the function  
of the sensors and cameras or cause malfunc-  
tions. Have an authorized Audi dealer or author-  
ized Audi Service Facility check their function.  
If this message appears, one or more driver assis-  
tance systems is limited or unavailable. To dis-  
play additional information, select the tab  
(messages) in the instrument cluster. Take note  
of the information and adapt your driving style  
accordingly.  
Surrounding area  
detection  
Radar sensors  
Depending on the vehicle equipment, the area  
surrounding the entire vehicle may be detected  
ðfig. 89 1 .  
Sensor and camera coverage areas  
The wheel sensors on the rear corners of the ve-  
hicle are positioned so that the adjacent lanes to  
the left and right are detected on roads with a  
normal lane width.  
Ultrasonic sensors  
Depending on vehicle equipment, various areas  
may be displayed in the MMI using the ultrasonic  
sensors ðfig. 89.  
The range of the displays depends on the location  
of the ultrasonic sensors:  
2
3
4
5
6
Approximately 4 feet (1.20 m)  
Approximately 3 feet (0.90 m)  
Approximately 5.2 feet (1.60 m)  
Approximately 3 feet (0.90 m)  
Approximately 3 feet (0.90 m)  
Fig. 89 Sensor coverage area  
The side area 6 is detected and evaluated when  
passing. There may have been changes to the sur-  
rounding area after turning off the ignition and  
on again, after opening the doors, or if the vehi-  
cle is left stationary for a period of time. In this  
128  

Related Topics

Popular Owner Manuals