2018-2026 Audi Q8 SUV Checking and Filling -> Engine compartment User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Checking and Filling -> Engine compartment for Your Audi Q8 SUV First Generation (2018-2026)

Checking and Filling  
cause overheating and damage to the catalytic  
converter.  
Tips  
The fuel filler door on your vehicle does not  
lock if you lock the vehicle from the inside us-  
ing the central locking switch.  
Malfunction Indicator Lamp (MIL)  
If the  
indicator light blinks or turns on, there  
is a malfunction related to emissions which can,  
for example, cause poor emissions quality and  
damage to the catalytic converter. Drive slowly to  
an authorized Audi dealer or authorized Audi  
Service Facility to have the malfunction correct-  
ed.  
Manually releasing the fuel filler door  
See an authorized Audi dealer or authorized  
Audi Service Facility if you cannot open the fuel  
filler door.  
Afterward, drive to an authorized Audi dealer or  
authorized Audi Service Facility to have the  
malfunction corrected.  
The indicator light can also turn on if the fuel fill-  
1)  
er cap is not closed correctly ðpage 253  
.
Emissions control  
system  
Engine compartment  
General information  
General information  
Special care is required if you are working in the  
engine compartment  
WARNING  
The temperature of the exhaust system is  
high, both when driving and after stopping  
the engine.  
For work in the engine compartment, such as  
checking and filling fluids, there is a risk of in-  
jury, scalding, accidents, and burns. For this  
reason, follow all the warnings and general  
safety precautions provided in the following in-  
formation. The vehicle's engine compartment is  
Never touch the exhaust tail pipes once they  
have become hot. This could result in burns.  
Do not park your vehicle over flammable  
materials such as grass or leaves because  
the high temperature of the emissions sys-  
tem could start a fire.  
a dangerous area. ð  
.
Explanation of warning symbols:  
Observe all warnings - there is a risk for  
injury!  
Do not apply underbody protectant in the  
exhaust system area, because this increases  
the risk of fire.  
Hot engine components!  
Rotating parts!  
Catalytic converter  
The radiator fan can turn on at any time!  
.
Observe the safety precautions ðpage 255, Gen-  
eral information.  
High voltage! The voltage level compo-  
nents, such as the high-voltage system,  
ignition system, or the belt alternator  
starter, carry can cause fatal injuries.  
Touching damaged live components can  
result in a fatal electric shock.  
The vehicle may only be driven with unleaded  
gasoline, or the catalytic converter will be de-  
stroyed.  
Never drive until the tank is completely empty.  
The irregular supply of fuel that results from that  
can cause engine misfires. Uncombusted fuel  
could enter the exhaust system, which could  
High voltage! Turn off the engine before  
coming into contact with any ignition  
system components!  
1)  
Depending on the engine and country  
255  
Checking and Filling  
The catalytic converter can be damaged  
if the oil level is too high!  
be burned. Wait until no steam or coolant is  
escaping.  
The cap on the coolant expansion tank must  
never be opened when the coolant is hot.  
The cooling system is under pressure. There  
is a risk of burns  
Hot coolant - there is a risk of scalding!  
Always follow the instructions in the  
Owner’s Manual.  
To protect your face, hands, and arms from  
hot steam or coolant, cover the cap with a  
thick cloth when opening.  
WARNING  
The engine/motor compartment in any motor  
vehicle is a potentially dangerous area and  
can cause serious personal injury.  
Do not remove the engine cover under any  
circumstances. This increases the risk of  
burns.  
Always use extreme caution when doing any  
work in the engine compartment. Always  
follow commonly accepted safety practices  
and use common sense. Never risk personal  
injury.  
Due to the risk of electric shock, never touch  
the ignition cable or other components in  
the electronic high-voltage ignition system  
when the engine is running or is starting.  
If a position is selected while the vehicle is  
stationary and the engine is running, do not  
press the accelerator pedal inadvertently.  
Pressing the accelerator pedal will cause the  
vehicle to move, and this could result in an  
accident.  
Never perform any work in the engine com-  
partment unless you know exactly how to  
carry out the job and have the correct tech-  
nical information and the correct tools.  
If you are uncertain about what to do, have  
the work performed by an authorized Audi  
dealer, an authorized Audi Service Facility,  
or another qualified workshop. Serious per-  
sonal injury may result from work that is not  
performed correctly.  
If inspections or repairs must be performed  
while the engine is running, moving compo-  
nents (such as the ribbed belt, generator,  
and radiator fan) pose an additional risk.  
Set the parking brake first and select the  
“P” (Park) position.  
WARNING  
Always make sure that no parts of the  
body, jewelry, ties, loose clothing, and  
long hair can be caught in moving engine  
components. Before any work, always re-  
move any jewelry and/or ties, tie back long  
hair, and make sure all clothing fits close  
to the body to reduce the risk of anything  
becoming caught in engine components.  
Pay attention to the following warnings list-  
ed when work on the fuel system or on the  
electrical equipment is required.  
Turn off the engine.  
Turn off the ignition.  
Set the parking brake.  
Select the “P” (Park) position.  
Allow the engine to cool.  
Keep children away from the engine com-  
partment.  
Never spill fluids on a hot engine. These flu-  
ids (such as the freeze protection contained  
in the coolant) can catch fire.  
Avoid short circuits in the electrical system.  
Never reach into the radiator fan. The fan is  
temperature-controlled and can turn on  
suddenly, even when the ignition is turned  
off.  
Do not smoke.  
Never work near open flames.  
Always have a working fire extinguisher  
nearby.  
All work on the battery or electrical system  
in your vehicle can result in injuries, chemi-  
cal burns, accidents, or burns. Because of  
this, all work must be performed only by an  
Never open the hood when there is steam or  
coolant escaping from the engine compart-  
ment, because there is a risk that you could  
256  
Checking and Filling  
Opening and closing the hood  
authorized Audi dealer or authorized Audi  
Service Facility.  
The hood is released from inside the vehicle.  
Limit your exposure to exhaust and chemi-  
cals to as short a time as possible.  
WARNING  
California Proposition 65 Warning:  
Engine exhaust, some of its constituents,  
and certain vehicle components contain or  
emit chemicals known to the State of Cali-  
fornia to cause cancer and birth defects and  
reproductive harm. In addition, certain flu-  
ids contained in vehicles and certain prod-  
ucts of component wear contain or emit  
chemicals known to the State of California  
to cause cancer and birth defects or other  
reproductive harm.  
Fig. 160 Footwell: release lever  
Battery posts, terminals and related acces-  
sories contain lead and lead compounds,  
chemicals known to the State of California  
to cause cancer and reproductive harms.  
Wash hands after handling.  
Fig. 161 Unlocked hood: lever  
Note  
Observe the safety precautions ðpage 255, Gen-  
eral information.  
When filling fluids, be sure not to add any flu-  
ids to the wrong reservoirs. Otherwise severe  
malfunctions and engine damage will occur.  
Make sure the wiper arms are not raised up from  
the windshield. Otherwise the paint could be  
damaged.  
For the sake of the environment  
You should regularly check the ground under  
your vehicle in order to detect leaks quickly. If  
there are visible spots from oil or other fluids,  
bring your vehicle to an authorized Audi deal-  
er or authorized Audi Service Facility to be  
checked.  
Opening the hood  
1)  
With the door open, pull the lever below  
the instrument panel in the direction of the ar-  
row ðfig. 160.  
Raise the hood slightly ð  
.
Press the lever ðfig. 161 in the direction of the  
arrow. This releases the hooks.  
Open the hood.  
Closing the hood  
Push the hood down until you override the  
force of the strut.  
Let the hood fall lightly into the latch. Do not  
press it in. ð  
.
1)  
The symbol is not available in all countries.  
257  
Checking and Filling  
Messages  
be burned. Wait until no steam or coolant is  
escaping.  
The following messages may appear, depending  
on the vehicle equipment:  
For safety reasons, the hood must always be  
latched securely while driving. Because of  
this, always check the hood after closing it  
to make sure it is latched correctly. The  
hood is latched if the front corners cannot  
be lifted.  
Warning! Hood is not locked. Stop vehicle  
and check the lock  
The hood latch is not locked correctly. Stop im-  
mediately and close the hood.  
If you notice that the hood is not latched  
while you are driving, stop immediately and  
close it, because driving when the hood is  
not latched increases the risk of an accident.  
WARNING  
Never open the hood when there is steam or  
coolant escaping from the engine compart-  
ment, because there is a risk that you could  
Engine compartment overview  
The most important check points.  
Fig. 162 Engine compartment overview: diagram  
Observe the safety precautions ðpage 255, Gen-  
eral information.  
2
Coolant expansion tank () ðpage 264  
3
Engine oil filler opening () ðpage 260,  
Checking the engine oil level  
1
Jump start point (+) under a cover, (-) with  
hex head screw ðpage 269, Charging the 12  
volt vehicle battery ðpage 310, Jump start-  
ing  
4
Sticker for engine oil specifications  
ðpage 259  
258  
Checking and Filling  
5
6
Brake fluid reservoir () under a cover  
ðpage 265  
engine oils which do not meet these quality  
standards can cause damage to the engine. As  
an exception and only in an emergency, 0.5 qt  
(0.5 l) of engine oil that differs from the  
standards listed may be used.  
Washer fluid reservoir () ðpage 270  
The engine oil filler opening may be located in a  
different area depending on the specific engine.  
Tips  
Engine oil  
Audi recommends using engine oils provided  
by Audi Genuine Parts.  
If the engine oil level is too low  
Messages  
The following messages may appear, depending  
on the vehicle equipment:  
Turn off engine. Oil pressure too low  
Stop driving and turn off the engine. Check the  
engine oil level ðpage 260.  
If the engine oil level is too low, add engine oil  
ðpage 261. Only continue driving once the in-  
dicator light turns off.  
Fig. 163 Engine oil sticker  
1 Engine oil viscosity  
2 Engine oil standard  
If the engine oil level is correct and the indica-  
tor light still turns on, turn the engine off and  
do not continue driving. See an authorized Audi  
dealer or authorized Audi Service Facility for as-  
sistance.  
If you need to add engine oil, use an oil that  
meets the engine oil standard listed on the stick-  
er ðfig. 163. The sticker with the specified  
standard is located in the front of the engine  
compartment ðpage 258, fig. 162. When using  
the specified engine oil, you can adjust the oil  
level as often as needed.  
Please add oil immediately  
Stop driving and turn off the engine. Check the  
engine oil level ðpage 260 and add engine oil  
immediately ðpage 261.  
If engine oil that meets the recommended speci-  
fication is not available, in an emergency you  
may add a maximum of 0.5 quart (0.5 liter) en-  
gine oil of the that meets the following different  
standard one time until the next regular oil  
change.  
Add max. x qt (x l) oil. You can continue  
driving  
Add the amount of oil shown immediately  
ðpage 261.  
Please reduce oil level  
Standard VW 504 00, ACEA C3, ACEA C4,  
API SP or ILSAC GF-6A. All viscosity classes  
within these standards are permitted.  
There is too much oil in the engine and there is a  
risk of damaging the catalytic converter or en-  
gine. Drive to an authorized Audi dealer or au-  
thorized Audi Service Facility immediately to have  
engine oil extracted if necessary. Avoid high en-  
gine speeds, full acceleration, and heavy engine  
loads.  
Audi recommends having the oil changed by an  
authorized Audi dealer or authorized Audi Service  
Facility.  
Note  
Oil level sensor: oil change necessary. Please  
Audi recommends using approved engine oil  
that meets the respective VW standard. Using  
contact Service  
259  

Related Topics

Popular Owner Manuals