2018-2026 Audi Q8 SUV Trailer towing -> Trailer hitch User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Trailer towing -> Trailer hitch for Your Audi Q8 SUV First Generation (2018-2026)

Trailer towing  
Audi recommends having the vehicle in-  
spected between the inspection intervals if  
you tow a trailer frequently.  
the Audi drive select comfort mode before  
connecting the trailer. The tongue weight  
and vehicle height must be coordinated with  
one another.  
Avoid driving with a trailer during the vehi-  
cle break-in period.  
Tips  
Even when lowering manually, the vehicle lev-  
el will not lower more than the amount speci-  
fied in the Audi drive select comfort mode.  
Air suspension  
Applies to: vehicles with air suspension  
Requirement: all vehicle doors must be closed.  
The Audi drive select comfort mode ðpage 115  
Trailer hitch  
is selected before you connect the trailer ð  
.
Introduction  
Setting trailer mode  
Only use a trailer hitch with a removable ball  
hitch mount and ball hitch. The trailer hitch must  
be permitted for the vehicle, the trailer, and the  
permitted total weight of the trailer being  
pulled. Above all, it must be securely and safely  
attached to the vehicle trailer.  
Applies to MMI: select on the home screen: VE-  
HICLE > Settings & Service > Air suspension:  
trailer.  
Turn trailer mode off again when you are no  
longer towing a trailer.  
For vehicles with a factory-installed trailer hitch,  
the air suspension trailer mode will automatically  
turn on if you connect the trailer connector to the  
socket.  
Never mount a trailer hitch on the bumper. The  
trailer hitch must be mounted in a way that does  
not impair the function of the bumper. Do not  
make any changes to the exhaust system and the  
brake system.  
When using rear carrier systems that are mount-  
ed directly on the trailer hitch ball head, you can  
also turn on trailer mode manually.  
Check regularly if the trailer hitch is securely  
mounted. Always follow the instructions given by  
the trailer hitch manufacturer.  
If you have to drive through difficult road condi-  
tions, you can raise the vehicle again after hitch-  
ing the trailer or after ensuring the tongue  
weight is correct. To do this, select the Audi drive  
select offroad or allroad mode ðpage 115, or  
select Raise to create the maximum ground  
clearance ðpage 116.  
WARNING  
Never mount a "weight-distributing" or "load-  
balancing" trailer coupler as the trailer hitch.  
The vehicle was not designed for these types  
of trailer hitches. The trailer hitch can mal-  
function and the trailer can separate from the  
vehicle, which increases the risk of an acci-  
dent.  
Note  
Never turn off trailer mode while driving  
when a trailer is hitched, because then the  
restrictions for controlling the vehicle level  
will be turned off.  
Driving with a trailer on unpaved roads  
when the vehicle is raised may change the  
vehicle handling. Adapt your speed.  
Note that the vehicle will lower automati-  
cally at certain speeds if you have lifted the  
vehicle manually.  
Be sure to adhere to the applicable tongue  
weight for your vehicle ðpage 122. Select  
124  
Trailer towing  
Using the trailer hitch  
Applies to: vehicles with trailer hitch  
To reduce the risk of injury, always remove  
the ball hitch mount if no trailer is mount-  
ed.  
To reduce the risk of an accident, contami-  
nants on the trailer hitch must be removed  
because otherwise the ball hitch mount  
might not be secured correctly in the receiv-  
er.  
Tips  
No ball hitch mount or ball head is provided  
with the trailer hitch. You can purchase  
these at specialty stores.  
Fig. 88 Rear bumper: trailer hitch  
The eyelets on the trailer hitch are only in-  
tended for securing the trailer safety chains.  
The trailer hitch of your vehicle consists of the re-  
ceiver 3 , the trailer socket 1 or retainer for  
1)  
the trailer socket, two eyelets 2 for the safety  
chains, and the receiver cover 4 .  
Driving with a trailer  
Trailer brakes  
The receiver 3 is suitable for securing a remova-  
ble ball hitch mount with a ball head, for exam-  
If the trailer has its own brake system, then fol-  
low the manufacturer specifications. However,  
the brake system on the trailer must never be  
connected to the vehicle brake system.  
ple when towing a trailer ð  
.
In order to use the trailer hitch, pull the cover  
4 out of the receiver 3 in the direction of the  
arrow.  
Safety chains  
Check the receiver 3 for dirt and clean it if nec-  
essary.  
When towing a trailer, use the trailer socket  
1 and secure the safety chains using the eye-  
lets 2 .  
To prevent dirt from entering the receiver 3 ,  
close it with the cover 4 after using it.  
Make sure the safety chains are correctly applied  
when pulling a trailer. The chains should hang  
down enough so that the trailer can drive around  
curves. However, they must not touch the  
ground.  
1)  
WARNING  
WARNING  
If the trailer is equipped with electronic  
brakes, these brakes cannot be activated by a  
factory-installed control system, which in-  
creases the risk of an accident.  
For your own safety, read the installation in-  
structions provided by the ball hitch mount  
manufacturer.  
There is a risk of an accident if the ball hitch  
mount is installed incorrectly. The ball hitch  
Retrofit installation  
mount must be secured in the receiver  
3
correctly. The same applies to accessories  
that are secured in the receiver.  
You can find out if your vehicle is equipped with a  
retrofitted trailer hitch at an authorized Audi  
dealer or authorized Audi Service Facility.  
Only use a ball hitch mount with ball head  
suitable for your vehicle and your trailer.  
1)  
In certain countries.  
125  

Related Topics

Popular Owner Manuals