800- Bodywork, Chassis Parts, Seat and Air Conditioning for Your Audi R8 2 Door Second Generation (2016-2024)

800- Bodywork, Chassis Parts, Seat and Air Conditioning  
800- Bodywork, Chassis Parts, Seat and Air  
Conditioning  
800 - 1 Seat  
Audi PS1  
Image 34: Audi Safety Seat PS1  
800 - 1.1 Homologation  
The Audi PS1 is homologated under the number AS.031.13 (M) and AS.032.13  
(L).  
This homologation is valid for 10 years from the date of manufacture.  
Version 1 2016-01-01  
77 / 113  
800- Bodywork, Chassis Parts, Seat and Air Conditioning  
Version 1 2016-01-01  
78 / 113  
800- Bodywork, Chassis Parts, Seat and Air Conditioning  
800 - 1.2 Seat Sizes  
The Audi PS1 is available in two sizes:  
Audi PS1 M 42A 881 023 D  
Audi PS1 L 42A 881 023 E  
The width of the M and L seats differs by 35 mm.  
Version 1 2016-01-01  
79 / 113  
800- Bodywork, Chassis Parts, Seat and Air Conditioning  
800 - 1.3 Cushions  
The Audi PS1 is equipped with different thickness Confor CF45 cushions, which  
comply with the regulations.  
Attention  
The cushions are an integral component of the safety concept and are important  
to absorb energy during accidents. For this reason, these cushions must not be  
removed when making additional inserts to fit the driver!  
Version 1 2016-01-01  
80 / 113  
800- Bodywork, Chassis Parts, Seat and Air Conditioning  
800 - 1.4 Additional Inserts  
If additional seat inserts must be made to fit the driver, one of the following FIA  
homologated foams must be used.  
FIA Technical List No. 50  
Version 1 2016-01-01  
81 / 113  
800- Bodywork, Chassis Parts, Seat and Air Conditioning  
800 - 1.5 Shoulder Strap Mounting  
Adjustment Options  
The angle of the shoulder straps must comply with FIA guidelines. To fulfil  
these guidelines, the shoulder strap mounting must be adapted to suit the size  
of the driver. Two possible options can be selected subject to the size of the  
driver.  
Version A  
Version B  
Below the roll-cage tube (small Above the roll-cage tube (large drivers)  
drivers)  
Image 35: Shoulder Strap Mounting Below Image 36: Shoulder Strap Mounting Above  
Roll-Cage Tube  
Roll-Cage Tube  
Version 1 2016-01-01  
82 / 113