Care of vehicle and cleaning
– Paintwork
WARNING
– The vehicle must be free of dirt and dust
before applying polish/wax – otherwise
the paintwork may be damaged.
– Do not polish/wax the vehicle in direct
sunlight – this can damage the paint!
– Do not attempt to polish out surface rust
deposits – this can damage the paint!
– Remove cosmetics and sun lotion immedi-
ately – otherwise the paintwork may be
damaged.
Do not use water-repellent coatings on the
windscreen. In bad visibility conditions such as
light rain, low sun or when driving at night
these coatings can cause increased dazzle,
which is a serious safety hazard. Such coat-
ings can also cause the wiper blades to judder.
CAUTION
– Headlights/rear lights
– Never clean the headlights/rear lights
with a dry cloth or sponge – risk of dam-
age!
– Decals
– Do not clean the decals with a high-pres-
sure cleaner as this could cause them to
come loose.
– Do not use cleaning agents containing al-
cohol. This could cause the glass to crack!
– Wheels
– Do not use any powder-based or abrasive
cleaning products – risk of damage!
– Do not polish decals – risk of damage!
– Do not use an ice scraper to remove snow
and ice from windows to which decals
have been applied – this could damage the
decals.
– Do not use paint polish or other abrasive
agents.
– If the protective paint coating on the
wheel rim is scratched or damaged by
stone chips etc., the damaged area should
be touched up without delay.
– Camera lenses
– Displays
– Before cleaning, ensure that the displays
are switched off and cool.
– Never remove snow and ice from the cam-
era lens using warm or hot water – danger
of cracks appearing on the lens.
– The displays/instrument cluster and the
surrounding trim must not be cleaned
with a dry cloth – this can scratch the sur-
faces!
– Never clean the camera lens with cleaning
agents which are abrasive or contain alco-
hol – danger of scratches and cracks.
– Windows and windscreen
– Do not let any liquid get between the in-
strument cluster and the trim – risk of
damage!
– Remove snow and ice from windows and
exterior mirrors with a plastic scraper on-
ly. To avoid scratches, the scraper should
only be pushed in one direction and not
moved to and fro.
– Control consoles
– Do not let any liquid get inside the control
consoles – risk of damage!
– Seat belts
– Never use warm or hot water to remove
snow and ice from windows and mirrors.
This could cause the glass to crack!
– To avoid damaging the heating element,
do not put stickers on the inner side of the
rear window.
– Do not remove the seat belts to clean
them.
– Do not use chemical cleaning agents, cor-
rosive liquids, solvents or sharp instru-
ments to clean the seat belts or their com-
ponents – this can damage the belt web-
bing!
– Ornamental trim/mouldings
– Do not use chrome cleaning agents.
– Rubber seals
– If you find any damage to the belt web-
bing, the belt fittings, the belt retractor or
the buckle, have the belt in question re-
placed by a qualified workshop.
– Do not use solvent-based cleaning prod-
ucts – risk of damage!
264