Navigation
– Zoom in on map: Place two fingers on the area
and move them apart or double-tap on the map
with one finger, press and hold your finger on
the map and swipe down with your finger.
– Gradually zoom out on map: Double-tap the
map with two fingers.
CAUTION
Please observe the information on Audi con-
nect, particularly with regard to connection
costs ð in Information on Audi connect on
page 197.
– Zoom out on map: Place two fingers on the
area and move them together or double-tap on
the map with one finger, press and hold your
finger on the map and swipe up with your fin-
ger.
Using traffic information
The MMI system can receive real-time informa-
tion from the internet regarding traffic conges-
tion, accidents, roadworks and other incidents.
The functions depend on the country and the
equipment fitted in your vehicle.
– Turn map: Turn the map with two fingers.
– Tilt map: Swipe up/down with two fingers.
Important: The MMI must be connected to the in-
ternet.
Using map functions
Setting the map colours
If traffic information is available on your route, it
is displayed on the map or in the route monitor.
You can set the map colours in the Navigation
settings menu ðpage 207. If the map colour is
set to Auto, the colour of the map changes to
match the current light conditions (e.g. from day
to night when driving through tunnels).
►
Press on the corresponding traffic information
to display details.
Urgent traffic information, such as a car travel-
ling in the wrong direction on the motorway, is
displayed automatically as a notification.
Calling up country information
Traffic obstructions on your route are displayed
using coloured warning symbols. Traffic obstruc-
tions that are not on your route are greyed out.
All traffic obstructions are highlighted in colour
on the map when route guidance is not active.
You can switch the display of country informa-
tion, such as permitted top speeds on the motor-
way, on/off in the Navigation settings menu
ðpage 207.
Showing traffic flow
Using the satellite map
You can switch flow of traffic on/off in the Map
content menu ðpage 207.
You can have the navigation map shown with sat-
ellite images. For this map display, the system
uses data packets received online in the form of
satellite pictures and combines these pictures
with the road network from the standard map
display.
Traffic flow is displayed in colour on the map:
– Green: no obstructions
– Orange: slow-moving traffic
– Red: traffic jams/obstructions
Important: The MMI must be connected to the in-
ternet.
CAUTION
Please observe the information on Audi con-
nect, particularly with regard to connection
costs ð in Information on Audi connect on
page 197.
You can switch the satellite map on/off in the
Navigation settings menu ðpage 207.
The satellite map is updated at regular intervals
when it is called up. This can take a few seconds.
Depending on the internet connection, the stand-
ard map may also be displayed when the satellite
map is activated.
210
English 
