2019-2025 Audi RS6 4 Door Storage and convenience -> Luggage compartment User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Storage and convenience -> Luggage compartment for Your Audi RS6 4 Door Fourth Generation (2019-2025)

Storage and convenience  
To use the cup holders in the rear centre arm-  
rest, fold the armrest down.  
den driving or braking manoeuvres – risk of  
accident! Always stow objects safely in the  
luggage compartment and secure them on  
the fastening rings. Use suitable securing  
straps when transporting heavy objects.  
If items of luggage or other objects are se-  
cured to the fastening rings with inappropri-  
ate or damaged tensioning straps, injuries  
could result in the event of sudden braking  
or a collision.  
WARNING  
Do not put any hot drinks in the cup holders  
while the vehicle is moving. You could be  
scalded if the hot liquid is spilt.  
Do not use cups, mugs or glasses made  
from hard materials such as glass or porce-  
lain. These objects can be thrown through-  
out the vehicle interior in the event of sud-  
den driving or braking manoeuvres – risk of  
injury!  
Transporting heavy objects may affect the  
vehicle's handling by shifting the centre of  
gravity – this could cause an accident. Take  
extra care when driving and adjust your  
speed accordingly.  
CAUTION  
The stretch net is only strong enough to se-  
cure light items. Heavier objects cannot be  
safely secured – risk of injury!  
Do not place open drinks containers in the cup  
holders. The drinks could otherwise spill over  
and cause damage to the vehicle’s equipment.  
Never exceed the maximum axle loads or  
the maximum gross weight for the vehicle.  
Never secure a child restraint system to the  
fastening rings.  
Luggage compartment  
Safety information on the luggage  
compartment  
Never leave your vehicle unattended when  
the boot lid is open. Children could climb in-  
to the boot and close the boot lid from the  
inside. In this case the children would be un-  
able to get out of the vehicle without help.  
This could have fatal consequences.  
Make sure all luggage and other objects in the  
luggage compartment are safely secured.  
Distribute the load evenly in the luggage com-  
partment.  
Close the luggage compartment cover before  
starting the journey if the vehicle load permits  
this.  
Place heavy items as far forward as possible in  
the luggage compartment.  
Never allow children to play in or around the  
vehicle. Always close and lock the boot lid  
and all the doors when you leave the vehicle.  
Never let passengers ride in the luggage  
compartment. All occupants must be prop-  
erly restrained by the seat belts at all times  
ðpage 68.  
Secure items of luggage to the fastening rings  
with non-elastic straps.  
Adjust the tyre pressures according to the load.  
Be careful when releasing and folding down  
the backrest! Carelessness when folding it  
down could result in injuries.  
WARNING  
The luggage compartment cover should not  
be used as a storage shelf. Items placed on  
this cover could injure the vehicle occupants  
in an accident or in the event of sudden driv-  
ing or braking manoeuvres.  
Always check to see if the locking mecha-  
nism is properly engaged by pulling the  
backrest forwards. Otherwise objects stored  
in the luggage compartment can fly forward  
during sudden braking – risk of injury!  
Always check to see if the locking mecha-  
nism is properly engaged by pulling the  
backrest forwards. Otherwise the protection  
provided by the seatbelt for the middle seat  
is not guaranteed – risk of injury!  
The luggage compartment cover must al-  
ways be securely attached when in use – risk  
of accident!  
Loose objects can be flung around in the  
passenger compartment in the event of sud-  
84  
Storage and convenience  
Please refer to the safety information ðpage 84.  
If the seat belt is trapped when the backrest  
is returned to its upright position, fold the  
backrest down again and free the seat belt.  
Hold the seat belt in one hand while you  
carefully fold up the backrest.  
When you operate the boot lid, an electric motor  
moves the luggage compartment cover into posi-  
tion 2 or 3 .  
Disengaging and engaging the luggage  
compartment cover  
The retaining hooks should only be used to  
hold objects weighing up to 3 kg. Heavier  
objects cannot be safely secured – risk of in-  
jury!  
To disengage the luggage compartment cover,  
lift the cover slightly to position 3 using the  
handle 1 .  
CAUTION  
Guide it along the support rails to position 2 .  
To retract the luggage compartment cover,  
guide it forwards slowly by hand, making sure  
it does not retract too quickly.  
To engage the luggage compartment cover,  
pull the cover out using the handle 1 .  
Lower the rear head restraints before you  
fold down the backrest – risk of damage!  
When returning the backrest to an upright  
position, make sure that the seat belts for  
the outer rear seats are in their guides so  
that they cannot be caught up and damaged  
in the catches for the backrest. It is also im-  
portant to remove any other objects from  
the rear seats to avoid damaging the back-  
rest when folding it forwards.  
Guide it into the support rails at position  
2
and engage it at position 3 .  
Removing and installing the luggage  
compartment cover  
Important: The luggage compartment cover is re-  
tracted.  
If you need to adjust the front seats when  
the rear backrest is folded forwards, please  
take care to avoid damaging the rear head  
restraints.  
To remove the luggage compartment cover,  
press the end cap 4 on one side inwards to  
loosen it from the side trim mounting.  
Lift the luggage compartment cover out.  
To install the luggage compartment cover, in-  
sert the end cap 4 on one side into the side  
trim mounting.  
Press the end cap on the other side inwards and  
position the luggage compartment cover be-  
tween the two mountings.  
Please ensure that hard objects do not chafe  
against the wires of the heating element in  
the rear window and cause damage.  
Applies to vehicles with electric luggage  
compartment cover: To prevent any dam-  
age, let the luggage compartment cover re-  
tract slowly.  
Also insert the end cap on the other side into  
the side trim mounting.  
Information on the electric luggage  
compartment cover  
Fig. 55 Luggage compartment: Electric luggage compart-  
ment cover  
85  
Storage and convenience  
To fold the centre backrest down, reach into the  
recess 1 from below and press the release  
handle upwards.  
When you no longer need the extra luggage  
space, move the centre backrest back into its  
upright position and make sure it engages.  
Folding the outer backrest up/down  
Installing/removing the load guard  
Fig. 56 Outer backrest: Release lever and backrest lock in-  
dicator with red marking  
Fig. 59 Luggage compartment and folded-down backrest:  
Load guard  
Applies to: Avant  
Fig. 57 Luggage compartment: Release lever  
Please refer to the safety information ðpage 84.  
To fold down the backrest, pull the release lev-  
er 1 or 3 on the appropriate side of the vehi-  
cle in the direction indicated by the arrow.  
When you no longer need the extra luggage  
Fig. 60 Load guard: Securing belt  
space, move the backrest back into its upright  
position until it engages and the red marking  
2 is no longer visible.  
The load guard prevents objects in the luggage  
compartment from being thrown forward into  
the passenger compartment. You can attach the  
load guard to the retainers 1 behind the front  
seats. On some models, you can also attach the  
load guard to the retainers 2 behind the rear  
seats.  
Folding the centre backrest up/down  
Please refer to the safety information ðpage 84.  
Installing the load guard  
To hook the load guard into the front retainers  
1 , the backrests must be folded down.  
Before hooking the load guard into the rear re-  
tainers 2 , remove the luggage compartment  
cover.  
To hook the load guard into the rear retainers  
Fig. 58 Centre backrest: Release handle under head re-  
straint  
2 , fit the adjustable fastening rings and slide  
Please refer to the safety information ðpage 84.  
86  
Storage and convenience  
them all the way to the front. Make sure that  
the rings engage.  
Secure the load guard in the top retainer on  
one side first, then in the bottom retainer 1 or  
2 on the same side. Make sure that the secur-  
ing belt 3 is facing towards the rear when se-  
curing.  
Tighten the securing belt 3 .  
Repeat the procedure on the other side.  
Fit the luggage compartment cover again if you  
removed it previously.  
Applies to: Avant  
Fig. 62 Luggage compartment: Adjustable fastening rings  
Removing the load guard  
Please refer to the safety information ðpage 84.  
Before removing the load guard from the rear  
retainers 2 , remove the luggage compartment  
Fastening rings  
On some models, there are fastening rings at the  
front 1 and rear 2 of the luggage compartment  
which can be used to secure luggage and other  
objects.  
cover.  
To unhook the load guard from the retainers  
or 2 , loosen the securing belt on one side by  
pulling the tab 4 upwards.  
1
Release the load guard from the bottom retain-  
er first, then from the top retainer 1 or 2 .  
Repeat the procedure on the other side.  
Fold the backrests back until they engage, if  
necessary.  
Fold up the clips on the fastening rings 1 and  
2 .  
Adjustable fastening rings  
On some models, there are adjustable fastening  
rings under the luggage compartment floor  
which can be used to secure luggage and other  
objects.  
Fit the luggage compartment cover again if you  
removed it previously.  
Using the fastening rings and stretch net to  
secure objects  
To install the fastening ring, press the buttons  
on both sides, place the fastening ring on the  
rail and fasten it in place.  
To move the fastening ring, press the buttons  
on both sides and slide the ring to the desired  
position. Make sure that the ring engages.  
To remove the fastening ring, press the buttons  
on both sides and take the fastening ring off  
the rail.  
Stretch net  
Depending on the vehicle’s equipment, there may  
be a stretch net in the vehicle which you can use  
to secure lighter objects in position in the lug-  
gage compartment.  
Applies to: Saloon  
Fig. 61 Luggage compartment: Location of fastening rings  
Insert the hooks of the stretch net into the fas-  
tening rings.  
87  
Storage and convenience  
Information on the load retention set  
Using the double floor panel  
Fig. 63 Luggage compartment: Load retention set  
Fig. 65 Luggage compartment: Floor panel in upright po-  
sition  
Dirty or damp items can be stored on the inter-  
mediate section underneath the floor panel.  
To prop up the floor panel, lift it by the handle  
1 and insert the edge of the floor panel in the  
recesses 2 .  
To fold the floor panel up fully, fold it towards  
the rear.  
To remove the floor panel, pull the complete  
Fig. 64 Luggage compartment: Load retention set under  
the floor  
panel towards the rear of the vehicle and out of  
the guide rails.  
To install the floor panel, insert it at the front  
Using the load retention set  
of the guide rails and push it towards the backr-  
ests as far as the stop.  
The telescopic bar 1 and retaining strap 2 pre-  
vent objects from sliding around in the luggage  
compartment.  
WARNING  
Please refer to the safety information ðpage 84.  
If you do not drive with the luggage compart-  
ment floor closed, objects on the intermedi-  
ate section may be flung through the vehicle  
interior in the event of sudden driving or brak-  
ing manoeuvres. Fit the load guard and secure  
the objects to protect all occupants – risk of  
injury!  
Attach the adjustable fastening rings.  
Press the pushbutton 3 on the posts and place  
them over the fastening rings. Make sure that  
the posts engage properly in the fastening  
rings.  
Slide the fastening rings to the desired posi-  
tion. Make sure that the rings engage.  
To tension the retaining strap 2 , press the  
pushbutton 3 .  
Stowing the load retention set  
Fold the luggage compartment floor all the  
way back.  
Slide the telescopic bar 4 together and place it  
in the recess.  
Roll up the retaining strap 5 and place it in the  
recess.  
88  
Storage and convenience  
Distances for roof carriers (cm)  
Roof carrier  
1
2
33  
71  
Safety information on roof carriers  
WARNING  
Note the fitting instructions provided by the  
manufacturer of the roof carrier system. If  
you do not secure the roof carrier system  
and roof load correctly, they can become  
separated from the vehicle and cause an ac-  
cident.  
The use of a roof carrier system affects the  
vehicle's handling by shifting the centre of  
gravity and increasing susceptibility to cross  
winds – risk of accident! Take extra care  
when driving and adjust your speed accord-  
ingly.  
Applies to: Saloon  
Fig. 66 Roof: Attachment points  
CAUTION  
Please take extra care not to let the boot lid  
strike the roof load when open.  
For the sake of the environment  
Applies to: Avant  
The increased air resistance means that the  
vehicle uses more energy. For this reason you  
should always take off the roof carrier when it  
is not in use.  
Fig. 67 Roof railing: Attachment points  
The cross bars form the basic elements of a com-  
plete roof carrier system. Use only roof carriers  
which are suitable for your vehicle. Audi recom-  
mends using roof carriers and additional ele-  
ments from the range of Audi Genuine Accesso-  
ries.  
Note the following points if you intend to carry  
loads on the roof:  
Only attach roof carriers at the points provided  
on the vehicle. If applicable, make sure distan-  
ces 1 and 2 are correct.  
You should ensure that you do not exceed the  
maximum permitted axle loads, gross weight  
and roof load for your vehicle. The roof load  
limit applies to the combined weight of the  
roof carrier, the additional elements and the  
load itself. Observe the maximum load capacity  
of the roof carrier you are using.  
89  

Related Topics

Popular Owner Manuals