2025-2026 Audi S Q5 SUV Driving information -> Lap timer User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Driving information -> Lap timer for Your Audi S Q5 SUV Third Generation (2025-2026)

Driving information  
Traffic light information is not available na-  
tionwide.  
The system could not be configured, for example  
due to a network malfunction. Turn off the igni-  
tion and shut down the vehicle to restart the sys-  
tem. Wait several minutes until the vehicle has  
shut down completely and then turn the ignition  
back on.  
The functions depend on the navigation da-  
ta* being up-to-date and correct identifica-  
tion by the traffic sign recognition*.  
Incorrect data from the camera-based traf-  
fic sign recognition* or outdated navigation  
system* map data may result in missing,  
implausible, or incorrect images in the dis-  
play.  
Function currently unavailable. See owner's  
manual  
There is a temporary system malfunction. Check  
if one or more of the following situations applies  
and correct the issue if necessary:  
Certain traffic lights can automatically ad-  
just to the current traffic situation. If this  
occurs, the display of traffic light informa-  
tion can change suddenly.  
Traffic light information is turned off  
Data transmission is deactivated  
The vehicle is not equipped with traffic sign rec-  
ognition.  
The traffic signs on the road always take pri-  
ority over the display. The driver is always  
responsible for adhering to the regulations  
applicable in the country where the vehicle  
is being operated.  
There is no valid license  
Traffic light information is not available in that  
area  
Units of measurement and language set-  
tings are displayed based on how they were  
set in the MMI system settings ðpage 242.  
Driver alert warning  
Description  
Applies to: vehicles with driver alert warning  
Operation  
Applies to: vehicles with traffic light information  
Within the limitations of the system, the driver  
alert warning informs the driver if a break is  
needed.  
Turning traffic light information on or off  
You can turn the traffic light information on or  
off in the Driver assistance menu ðpage 142.  
After starting to drive, the driver alert warning  
analyzes the driving behavior and uses this data  
to assess drowsiness. This assessment is continu-  
ously compared with the current driving behav-  
ior.  
Accessing traffic light information  
Select in the instrument cluster: vehicle func-  
tions tab > Traffic signs.  
If this comparison suggests that the driver is  
drowsy while traveling at speeds of 40 mph (65  
km/h) or above, then the system will recommend  
a break. This suggestion will be provided by  
means of a display in the instrument cluster. If  
high levels of drowsiness are detected, there will  
also be an audio signal.  
Tips  
If another tab or another function is selected  
in the instrument cluster, the traffic light in-  
formation will appear in the status bar on the  
instrument cluster.  
Messages  
Applies to: vehicles with traffic light information  
System limitations  
In the some situations, the system may not be  
able to interpret the driver's behavior correctly:  
The following messages may appear, depending  
on the vehicle equipment:  
At speeds lower than approximately 37 mph  
(60 km/h)  
Malfunction! See owner's manual  
146  
Driving information  
At speeds greater than approximately 80 mph  
(130 km/h)  
Possible settings:  
Sensitivity – You can set the sensitivity of the  
driver alert warning to High, Medium or Low.  
On curvy roads  
With poor road conditions  
In construction zones  
Opening the drowsiness display  
In poor weather conditions  
When driving with a sporty driving style  
If you are distracted  
The current drowsiness assessment is displayed  
in the instrument cluster.  
Select in the instrument cluster: vehicle func-  
If the Lane guidance* is activated  
If the driver starts to sleep or sleeps momen-  
tarily  
tions tab > Driver state estimat.  
If you turn off the system, it will remain off the  
next time you turn on the ignition.  
Resetting the system  
The system will be automatically reset in the fol-  
lowing situations:  
Messages  
Applies to: vehicles with driver alert warning  
When you turn off the ignition  
If you unbuckle the driver's safety belt and open  
the driver's door  
If is displayed when there is a malfunction,  
the driver alert warning functions may be un-  
available or may be limited.  
If the vehicle is stationary for some time  
A message that indicates the cause and possible  
solution may appear with some displays. Try  
turning on the system again later.  
WARNING  
Observe the safety precautions and note the  
limitations of the assist systems, sensors,  
and cameras ðpage 139 to ðpage 142.  
Never drive when you are tired, as this could  
increase the risk of an accident. On long  
drives, regularly take breaks that are long  
enough to provide sufficient rest. The driver  
is always responsible for their own driving  
capability.  
If the malfunction remains, drive to an author-  
ized Audi dealer or authorized Audi Service Facili-  
ty immediately to have the malfunction correct-  
ed.  
The following messages may appear, depending  
on the vehicle equipment:  
Driver alert warning: please take a rest!  
High levels of drowsiness have been detected.  
Take a break.  
Tips  
In some situations, the system may interpret  
driving maneuvers incorrectly and then rec-  
ommend a break based on that incorrect in-  
terpretation.  
Driver alert warning: rest recommended  
Low levels of drowsiness have been detected.  
Take a break if possible.  
Distraction warning  
Operation  
Applies to: vehicles with driver alert warning  
Description  
Applies to: vehicles with distraction warning  
Turning the driver alert warning on or off  
You can turn the driver alert warning on or off  
and adjust its settings in the Driver assistance  
menu ðpage 142. When the fatigue warning  
system is turned off, a notification will appear in  
the instrument cluster. The settings depend on  
the vehicle equipment.  
The distraction warning will provide an alert if  
the system detects that the driver is distracted  
from the traffic situation.  
The system detects if you are performing opera-  
tions while driving that could distract you from  
147  

Related Topics

Popular Owner Manuals