Emergency assistance
Tips
WARNING
– If the power supply is interrupted, then it
will not be possible to move the selector out
of the "P" position. The parking lock must
be released using the manual release before
towing the vehicle ðpage 103.
– Never tow a vehicle using a tow bar or tow-
ing cable if the vehicle does not have electri-
cal power.
– If the vehicle loses power while it is being
towed, stop towing the vehicle immediately
and consult an authorized Audi dealer or
qualified repair facility.
– Turn off Audi pre sense* ðpage 171 when
loading the vehicle onto a vehicle carrier,
train, ship, or other type of transportation,
or when towing the vehicle. This can prevent
an undesired intervention from the pre
sense* system.
Front towing eye
– Follow the local legal regulations for tow-
ing.
Towing
Read and follow the important information on
ðpage 305.
Preparations
Fig. 192 Front bumper: installing the towing eye
►
Only secure the towing cable or tow bar at the
designated towing eyes ðpage 306,
ðpage 307.
The threaded opening for the towing eye is locat-
ed on the right side of the front bumper.
►
Make sure the towing cable is not twisted. Oth-
►
Remove the towing eye from the vehicle tool kit
erwise it could disconnect from the towing eye
while towing.
Turn on the emergency flashers in both vehicles
ðpage 54. However, do not do this if it prohib-
ited by law.
ðpage 297.
Press the cap inward with brief, strong pressure
ðfig. 192. The cap will loosen from the bump-
er.
►
►
►
Tighten the towing eye as far as it will go into
the mount. Use a suitable object to tighten the
towing eye completely and securely in the
mount.
After using, place the towing eye back in the ve-
hicle tool kit.
Towing vehicle (front)
►
Start driving only once the towing cable is taut.
►
Press the brake pedal very carefully.
►
►
Avoid sudden braking or driving maneuvers.
Vehicle being towed (rear)
WARNING
►
Make sure the ignition is turned on so that the
If the towing eye is not tightened all the way
when installing, the threads may be pulled
out when towing the vehicle and result in an
accident.
steering wheel is not locked and so that you can
use the turn signals, the horn, and the wind-
shield wipers if needed ð
.
►
The full functionality of the brake booster and
power steering may not be available. You would
then need to use more force to steer and brake
the vehicle.
Release the parking brake ðpage 111.
Select the “N” position.
Tips
Depending on the model, the shape of the cap
can vary.
►
►
►
Make sure the towing cable is always taut.
306
English 
