Parking and maneuvering
3 feet (1 meter). The blue surface is a static
display and represents an extension of the
vehicle perimeter to the rear.
WARNING
– Observe the safety precautions and note the
limitations of the assist systems, sensors,
and cameras ðpage 139 to ðpage 142.
– Sensors and cameras have spots in which
the surrounding area cannot be detected.
Objects, animals, and people may only be
detected with limitations or may not be de-
tected at all. Always monitor the traffic sit-
uation and the vehicle's surroundings direct-
ly and do not become distracted.
3
4
You can recognize the rear bumper in the
lower display.
You should stop driving in reverse when the
red orientation line touches the edge of an
object, at the latest.
Trailer view
Applies to: vehicles with trailer view
Requirement: the rearview camera or peripheral
cameras are activated.
Note
– Applies to: vehicles with peripheral cameras:
– The orange orientation lines 1 show the di-
rection the rear of the vehicle will be travel-
ing, based on the steering wheel angle. The
front of the vehicle swings out more than
the rear of the vehicle. Maintain plenty of
distance so that an exterior mirror or a cor-
ner of the vehicle does not collide with any
obstacles.
Switch to the Rear view ðpage 180, fig. 138.
– Select
> Trailer view in the center display
when the parking aid is active.
With the trailer view ðfig. 137, it will be easier
for you to position your vehicle in front of a trail-
er. The orange orientation line 5 ðfig. 137 indi-
cates the expected path toward the trailer hitch.
Use the blue markings 6 to help you estimate
the distance to the trailer hitch. Each marking
represents approximately 1 foot (0.30 meters).
The width of the blue surface represents the
maximum steering wheel angle.
– Keep enough distance from the curb to
avoid damage to the rims.
– Only use the images provided by the camera
on the rear of the vehicle when the luggage
compartment lid is completely closed. Make
sure any objects you may have mounted on
the luggage compartment lid do not block
the rearview camera.
Symbols
Applies to: vehicles with peripheral cameras
If // is displayed and the display area
represented by that symbol is not available, then
the camera on the that side is not available. The
power exterior mirrors may have been folded in
or a door or the luggage compartment lid may
have been opened.
Tips
– Applies to: vehicles with air suspension: The
accuracy of the orientation lines and blue
surfaces on the camera display decreases
when the vehicle is raised or lowered with
the air suspension.
If is displayed, there is a system malfunction
and the display area represented by that symbol
is not available. The camera is not working in this
area.
– There is no distance warning for the rear
and the sides* when trailer towing mode is
detected. The front sensors remain activat-
ed. The visual display switches to trailer
mode. There is no guarantee the functions
will be deactivated when using a retrofitted
trailer hitch.
If one of the symbols continues to be displayed,
drive immediately to an authorized Audi dealer or
authorized Audi Service Facility to have the mal-
function corrected.
179
English 
