Get Touch display -> General touch display operation Guide for Audi S Q5 SUV Third Generation (2025-2026)

Instrument cluster

Odometer

outside temperature is around 41 °F (+5 °C)

and that ice can increase the risk of accidents.

Engine oil temperature

indicator

Applies to: vehicles with engine oil temperature indicator

Depending on the vehicle equipment, the engine

oil temperature  may be indicated by a bar in

the instrument cluster.

►

Applies to: vehicles with Audi virtual cockpit:

Fig. 9 Instrument cluster: reset button

Open the vehicle functions tab and switch to

the enhanced view ðpage 16.

The trip odometer and odometer are displayed in

►

Applies to: vehicles with analog instrument

the status bar 4 ðpage 14.

cluster: Open the lap timer ðpage 148.

The trip odometer shows the distance driven

since it was last reset. It can be used to measure

short distances. The odometer shows the total

distance that the vehicle has been driven.

When engine oil temperatures are low, the dis-

play --- °F (--- °C) appears in the instrument clus-

ter. The engine has reached its operating temper-

ature when the engine oil temperature is be-

tween 176 °F (80 °C) and 248 °F (120 °C) under

normal driving conditions. The engine oil temper-

ature may be higher if there is heavy engine load

Resetting the trip odometer

►

To reset the trip odometer to zero, press the re-

set button 1 .

and high temperatures outside. This is not a



Tips



cause for concern as long as the

tor lights do not turn on.

indica-

Distances are displayed in mi (miles) or km

(kilometers).

Boost indicator

Applies to: vehicles with boost indicator

Outside temperature

display

Depending on vehicle equipment, the current en-

gine load (meaning the current boost pressure)

may be indicated by a bar in the instrument clus-

ter.

The outside temperature is displayed in the sta-

tus bar 4 ðpage 14.

If your vehicle is stationary or if you are driving at

very low speeds, the temperature displayed in

the instrument cluster may be slightly higher

than the actual temperature outside due to heat

radiating from the engine.

►

Applies to: vehicles with Audi virtual cockpit:

Open the vehicle functions tab and switch to

the enhanced view ðpage 16.

Applies to: vehicles with analog instrument

►

cluster: Open the lap timer ðpage 148.

At temperatures below 41 °F (+5 °C), a snowflake

symbol appears in front of the temperature dis-

Vehicle functions

play ð

Overview

WARNING

The trip computer is displayed in the first tab of

the driver information system. Additional vehicle

functions can be accessed depending on the vehi-

cle equipment.

Do not assume the roads are free of ice based

on the outside temperature display. Be aware

that there may be ice on roads even when the



Instrument cluster

►

Press the  button on the multifunction steer-

ing wheel.

it is turned off. If you continue driving within two

hours after turning off the ignition, the new val-

ues will be included when calculating the current

trip information.

– Trip computer ðpage 19

– Energy flow ðpage 106

– Tachometer ðpage 16

– Lap times ðpage 148

Unlike the short-term memory, the long-term

memory is not erased automatically. You can se-

lect the time period for evaluating trip informa-

tion yourself.

– Lap statistics ðpage 149

– Reduced display ðpage 16

Average consumption

Trip computer

The current consumption can be shown using a

bar graph. The average consumption stored in

the short-term memory is also displayed. If the

bar is green, your vehicle is saving fuel (for exam-

ple, using recuperation).

Changing the display

►

Turn the left thumbwheel on the multifunction

steering wheel 7 ðpage 15, fig. 5 until the

desired display is shown.

Energy consumers

Resetting values to zero

The Energy consumers view lists other equip-

ment that is currently affecting fuel consump-

tion. The display shows up to three equipment

items. The equipment using the most power is

listed first. If more than three items using power

are turned on, the equipment that is currently

using the most power is displayed. A gauge also

shows the current total consumption of all other

equipment.

Requirement: the Consumption, Short-term

memory, or Long-term memory display must be

selected.

►

To reset the values in one of the memories to

zero, press and hold the left thumbwheel on

the multifunction steering wheel for one sec-

ond, or

►

Select on the instrument cluster: vehicle func-

tions tab >  button > Reset mi.

Tips

Displays in the trip computer

The date, time of day, and time and date for-

The following displays may be shown, depending

on the vehicle equipment:

mat can be set ðpage 242.

– Time and date ðpage 242

– Level

– Digital speedometer

– Plug-in hybrid drive: range display

– Average consumption ðpage 19

– Range

– Short-term memory overview

– Long-term memory overview

– Energy consumers ðpage 19

– Driver assistance ðpage 155

– Traffic sign recognition and traffic light infor-

mation

Short-term memory and long-term memory

The short-term memory collects driving informa-

tion from the time the ignition is turned on until

Touch display

►

Press and hold an item until the associated op-

tions are displayed.

Touch display

General touch display

operation

Pressing and pulling

Applies to: touch display

General information

Applies to: touch display

The center display is a touchscreen. Operation is

very similar to operating a smartphone.

Tips

Certain gestures are not available in every

menu.

Fig. 12 Touch display: pressing and pulling

Pressing

Applies to: touch display

Moving an item

Some items can be placed in any location.

►

Press and hold an item, and then use your fin-

ger to pull it to the desired location.

Creating and deleting folders

►

To create a folder, press and hold an item and

drag it onto another one. The folder will be cre-

ated and a name fitting the category will be as-

signed ðpage 24.

Fig. 10 Touch display: pressing

►

To delete a folder, move all items out of the

Selecting a function or button

folder.

►

Press the desired function or button.

Pinching fingers together and pulling apart

Pressing and holding

Applies to: touch display

Fig. 13 Touch display: pinching fingers together and pull-

ing them apart

Fig. 11 Touch display: pressing and holding

Zooming in and out on an item

Accessing options

►

To increase the size of an item, touch it with

two fingers and pull your fingers apart.

To decrease the size of an item, touch it with

For some items, you can access additional op-

tions that are not directly visible.

►

two fingers and pull your fingers together.

Touch display -> General touch display operation for Your Audi S Q5 SUV Third Generation (2025-2026)

Related Topics

Popular Owner Manuals

Latest Owner Manuals