Get Navigation Guide for BMW 1 Series 4 Door Second Generation (2011-2019)

Navigation

This chapter describes how you can

enter destinations and specify your route

so that your navigation system guides you

reliably to your destination.

Navigation

Navigation system

Vehicle equipment

Navigation data

In this chapter, all production, country, and

optional equipment that is offered in the model

range is described. Equipment is also described

that is not available because of, for example,

selected options or country version. This also

applies to safety related functions and systems.

General information

Navigation data and authorization codes are

available from your BMW center. Navigation

data are stored in the vehicle and can be

updated.

>

Depending on the data volume, a data

update may take several hours.

General information

Update data while driving to reduce the

drain on the battery.

The navigation system can determine the pre-

cise position of the vehicle, with the aid of satel-

lites and vehicle sensors, and can reliably guide

you to every entered destination.

Only the main functions of the navigation

system are available during updating.

The update is resumed automatically when a

trip is continued after an interruption.

Enter data only with the vehicle station-

ary, and always give priority to the appli-

>

You can inquire as to the status of the

update.

cable traffic regulations in the event of any con-

tradiction between traffic and road conditions

and the instructions issued by the navigation

system. Failure to take to this precaution can

place you in violation of the law and put vehicle

occupants and other road users in danger.<

>

The data are stored in the vehicle.

After the update, the system restarts.

The medium that holds the navigation

data can be removed after the update is

completed.

Accessing navigation system

Information about navigation data

1. "Navigation"

1.

2. "Navigation"

The navigation system can also be

accessed directly with the button on the

controller.

Press the button.

2. Open "Options".

3. "Navigation system version":

Information about the data version is

displayed.

Updating the navigation data

Inserting navigation DVD

1. Insert the navigation DVD into the DVD

player with the labeled side facing up.

2. Follow the instructions on the Control

Display.

3. Enter the authorization code of the naviga-

tion DVD and change the DVD if needed.

132

Navigation system

Navigation

Removing navigation DVD

1. Press button 1.

The DVD emerges slightly from the drive.

2. Remove the DVD.

Querying status

1.

Press the button.

2. "Navigation update"

133

Navigation

Destination entry

1.

Press the button.

Vehicle equipment

2. "Navigation"

In this chapter, all production, country, and

optional equipment that is offered in the model

range is described. Equipment is also described

that is not available because of, for example,

selected options or country version. This also

applies to safety related functions and systems.

3. "Enter address"

General information

In entering your destination you can select from

the following options:

>

Entering a destination manually, see below

The system also supports you with the

following features:

Selecting destination from address book,

refer to page 136

>

If you do not enter a street, the system will

guide you to the downtown area of a town or

city.

>

Last destinations, refer to page 137

Special destinations, refer to page 137

>

You can skip the entry of state/province and

town/city if the current entries should be

retained for your new destination.

Entering a destination on the map, refer to

page 139

>

Selecting home address, refer to page 137

Destination entry via voice, refer to

page 140

Entering a state/province

1. "Navigation"

>

Destination entry via BMW Assist, refer to

page 139

2. "Enter address"

3. Select "State/Province" or displayed

country.

You can also store a navigation destination on

the programmable memory keys, refer to

page 25.

Entering a town/city

1. Select "Town/City/Postal Code" or the

displayed town/city.

Entering a destination

manually

To make it easier to enter town/city names and

street names, the system assists you with auto-

matic name completion and entry comparison,

refer to page 143. This makes it possible to

enter different spellings and completes your

entry automatically so that stored town/city

names and street names can be accessed

quickly.

134

Destination entry

Navigation

2. Select letters, if necessary.

If there are several streets with the same name:

1. Change to the list of street names.

2. Highlight street.

The list is reduced in steps with each entry.

To delete letters:

> To delete individual letters:

3. Select the street.

Turn the controller to select

then press the controller.

, and

Alternative: entering street and house

number

> To delete all letters:

Turn the controller to select

1. Select "Street" or displayed street.

then press the controller for an extended

period.

2. Enter the street the same way you entered

the town/city.

To enter spaces:

3. "House number"

> Select the

symbol.

4. Select the digits.

The list gradually grows smaller each time

you enter a new letter.

5. Change to the list of house numbers.

6. Select a house number or range of house

numbers.

3. Move the controller to the right.

4. Select the name of the town/city from the

list.

No such street at the destination

If there are several towns/cities with the same

name:

The desired street is not in the entered town/

city because it belongs to another district of the

town/city.

1. Change to the list of town/city names.

2. Highlight the town/city.

1. "Navigation"

2. "Enter address"

3. Select the town/city.

3. Select "Street" or displayed street.

4. Change to the list of street names.

5. Select "In" displayed country.

Entering the postal code

1. Select "Town/City/Postal Code" or the

displayed town/city.

All streets of the entered country are

offered. The corresponding town/city is

displayed after the street name.

2. Select the

symbol.

3. Select the digits.

4. Change to the list of postal codes and

towns/cities.

5. Highlight the entry.

6. Select an entry.

Entering street and intersection

1. Select "Street" or displayed street.

2. Enter the street and cross-street the same

way you entered the town/city.

6. Select the letters.

After you enter the street, you can also enter

the cross street or the house number.

7. Change to the list of street names.

8. Highlight street.

9. Select the street.

135

Navigation

Destination entry

Starting destination guidance after

entering the destination

Storing a destination in the address

book

1. "Accept destination"

Store the destination in the address book after

entering the destination.

2. "Start guidance" or "Add as another desti-

nation", refer to page 141.

1. "Navigation"

2. "Map"

>

Setting "Route preference", refer to

page 143.

3.

"Guidance"

>

Search for "Points of Interest at loc.", refer

to page 137.

4. Open "Options".

5. "Store as new contact" or "Add to existing

contact".

Address book

To create contacts, refer to page 212.

Selecting a destination from the

address book

1. "Navigation"

2. "Address book"

Contacts with addresses are displayed if

these addresses have been checked as

destinations.

6. Select an existing contact, if available.

7. "Business address" or "Home address"

8. "Last name" and "First name" if you wish.

9. "Store in vehicle"

If the contacts with addresses from the

mobile phone are not displayed, they first

need to be checked as destinations, refer to

page 202.

Storing the position

Your current position can be stored in the

address book.

1. "Navigation"

2. Open "Options".

3. "Store position as contact" or "Add position

to contact".

3. Select a contact in the list or if so desired,

using the "A-Z search".

4. Select "Business address" or "Home

address"

136

Destination entry

Navigation

4. Depending on the selection, select an exist-

ing contact from the list or the type of

Opening the last destinations

1. "Navigation"

address and enter the last and first name.

2. "Last destinations"

5. "Store in vehicle"

Editing or deleting an address

1. "Navigation"

2. "Address book"

3. Highlight the entry.

4. Open "Options".

5. "Edit in Contacts" or "Delete entry".

3. Select the destination.

Using the home address as a

destination

4. "Start guidance" or "Add as another

destination"

The home address must be created. Specifying

a home address, refer to page 212.

Editing a destination

1. "Navigation"

2. "Address book"

3. "Home"

Destinations can be edited, for example, to

change the house number of an existing entry.

1. "Navigation"

2. "Last destinations"

3. Highlight the destination.

4. Open "Options".

5. "Edit destination"

Deleting the last destinations

1. "Navigation"

2. "Last destinations"

3. Highlight the destination.

4. Open "Options".

4. "Start guidance"

5. "Delete entry" or "Delete all last

destinations".

Last destinations

The last destinations are stored automatically.

These destinations can be called up and used

as a destination for destination guidance.

Special destinations

General information

Even with the most up-to-date navigation data,

information about certain special destinations

may have changed; for example, filling stations

may not be in operation.

137

Navigation

Destination entry

If a phone number is available, a connection

can be established, if desired.

Opening the search for special

destinations

1. "Navigation"

10. Select the

symbol.

2. "Points of Interest"

11. "Start guidance" or "Add as another desti-

nation". Adding destination as another

destination, refer to page 141.

The search can be narrowed by entering the

location and type of special destination.

"Start search": without entering a search term,

the search is repeated with the last stored

search term.

Searching online

1. "Google™ Local Search"

2. Select the special destination.

Category search

1. "Category search"

2. "Town/City"

3. Select the

symbol.

4. "Start guidance"

3. Select or enter town/city.

4. "Category"

Special destination location

As you input the search destination, you can

select from among various options.

5. Select category.

>

"At current location"

"At destination"

6. "Category details"

For some special destinations, it is possible

to select several category details.

Move the controller toward the left to exit

category details.

"At different location"

"Along route"

7. "Start search"

A-Z search

A list of the special destinations is

displayed.

1. "A-Z search"

2. "Town/City"

8. Select the special destination.

Details are displayed.

3. Select or enter town/city.

4. "Category"

If several details are stored, then you can

scroll through the pages.

5. Select category.

6. "Category details"

If a phone number is available, a connection

can be established, if desired.

For some special destinations, it is possible

to select several category details.

Move the controller toward the left to exit

category details.

9. Select the

symbol.

10. "Start guidance" or "Add as another desti-

nation". Adding destination as another

destination, refer to page 141.

7. "Keyword"

8. Enter keyword.

Displaying special destinations

A list of the special destinations is

displayed.

List of special destinations: the special destina-

tions are displayed in order of their distance and

are displayed with a direction arrow pointing

toward the destination.

9. Select the special destination.

Details are displayed.

If several details are stored, then you can

scroll through the pages.

138

Destination entry

Navigation

With the Professional navigation system:

In the split screen, special destinations from the

selected category are displayed as symbols in

the map view. The display depends on the map

scale and the category.

Selecting the destination

1. "Navigation"

2. "Map"

The current position of the vehicle is displayed

on the map.

Destination entry via BMW Assist

3.

"Interactive map"

A connection to the BMW Concierge service is

established, refer to page 213.

1. "Navigation"

2. "Enter address"

3. Open "Options".

4. "BMW Assist dest. entry"

Displaying special destinations in the

map

4. Select the destination with the cross-hairs.

To display symbols of the special destinations

in the map:

> To change the scale: turn the controller.

> To shift the map: move the controller in

1. "Navigation"

the required direction.

2. "Map"

> To shift the map diagonally: move the

controller in the required direction and

turn it.

3. Open "Options".

4. "Display Points of Interest"

5. Press the controller to display additional

menu items.

> Select the

symbol: "Start guidance"

or "Add as another destination".

> "Find points of interest": the search for

special destinations is started.

Specifying the street

If the system cannot recognize a street, it dis-

plays one of the following pieces of information:

5. Select the settings.

>

A street name in the vicinity.

The district.

Destination entry via map

If you only know the location of a destination or

street, then you can enter the destination with

the aid of the map.

The coordinates of the destination.

Interactive map

In the interactive map, the scale can be adjusted

and the visible map section can be shifted. In

addition, pressing the controller makes further

functions available:

139

Navigation

Destination entry

>

Countries, towns and cities, streets and

intersections can be said as whole words or

spelled in the system language, refer to

page 87.

Example: to enter a destination in a US state

as a complete word, the system language

must be English.

>

Spell the entry if the language spoken in the

area is different from the system language.

> Select the

symbol.

Say the letters smoothly, and avoid exag-

gerating the pronunciation and inserting

lengthy pauses between the letters.

"Start guidance" or "Add as another

destination"

> "Exit interactive map":

>

The methods of entry depend on the navi-

gation data in use and on the country and

language settings.

Go back to the map view.

> "View in northern direction" or "View in

driving direction"

Entering an address in a command

> "Display destination":

1. Press the

button on the steering wheel.

The section of the map around the

destination is displayed.

2. {Enter address}

> "Display current location":

The section of the map around the

current position is displayed.

3. Wait for a request from the system.

4. Say the address aloud in the suggested

order.

> "Find points of interest", refer to

5. Continue making the entry as prompted by

the system.

page 137.

If necessary, individually name the separate

components of the address, e.g. the town/city.

Destination entry via voice

Entering a town/city

General information

The town/city name can be spoken as a

complete word or spelled.

For instructions on the voice activation system,

refer to page 27.

With the destination entry menu displayed:

>

During the destination entry by voice, you

can switch between voice operation and

entry via iDrive at any time. To do so,

reactivate the voice activation system if

necessary.

1. Press the

button on the steering wheel.

2. {City} or {Spell city}.

3. Wait for the system to prompt you for the

town/city.

>

Having the possible spoken commands

read aloud: {Voice commands}

4. Say the name of the town/city or say at least

the first three letters.

Saying the entries

>

With the Professional navigation system:

City/town, street, and house number can be

entered with a single command.

140

Destination entry

Navigation

Depending on the entry, up to 20 towns/

cities may be suggested.

Planning a trip with

intermediate destinations

5. Select a location:

> To select a recommended town/city:

{Yes}

New trip

A trip can be planned using intermediate

destinations.

> To select other town/city: {New

entry}

1. "Navigation"

> To select an entry, e.g. {Entry …}

> To spell an entry: {Spell city}

2. "Map"

3. Move the controller to the left, if necessary.

6. Continue making the entry as prompted by

the system.

4.

"Guidance"

5. "Enter new destination"

If there are several towns/cities with the same

name:

6. Select the type of destination entry.

Towns/cities that sound the same are compiled

in a separate list and are displayed as one town/

city followed by three dots.

1. Select an entry:

{Yes} or {Entry …} e.g. entry 2.

2. Select the desired town/city.

The town/city can also be selected from the list

via iDrive: turn the controller until the town/city

is selected and press the controller.

7. Enter the intermediate destination.

8. "Start guidance"

Entering a street or intersection

Entering intermediate destinations

The street or intersection is entered in the same

manner as the town/city.

A maximum of 30 intermediate destinations can

be entered for one trip.

1. "Enter new destination"

Entering a house number

Depending on the data in the navigation sys-

tem, house numbers up to the number 2,000

can be entered:

2. Select the type of destination entry.

3. Enter the intermediate destination.

4. "Add as another destination"

1. {House number}

The intermediate destination is inserted

into the destination list and highlighted.

2. Say the house number.

Say each digit separately.

5. Turn the controller until the intermediate

destination is at the desired place in the list.

3. Continue making the entry as prompted

by the system.

6. Press the controller.

Starting destination guidance

{Start guidance}

Destination guidance starts immediately.

141

Navigation

Destination entry

Starting the trip

Options for intermediate destinations

After entering all intermediate destinations,

highlight the first destination and say "Start

guidance"

1. "Map"

2.

"Guidance"

3. "Display all trip destinations"

4. Select an intermediate destination.

> "Edit destination"

For example if the second destination is high-

lighted at the start of route guidance, then the

first destination is skipped over.

> "Reposition dest. in the trip": move the

The

ate destination.

symbol indicates the active intermedi-

intermediate destination within the list.

> "Delete dest. in the trip"

Storing a trip

> "Go to next dest. in the trip"

Up to 30 trips can be stored in the trip list.

Delete existing trips as necessary to permit you

to store new trips.

Some options are not possible for some trips.

Deleting a stored trip

1. "Navigation"

1. Open "Options".

2. "Store trip"

3. Enter a name.

4. "OK"

2. "Stored trips"

3. Select the desired trip.

4. Open "Options".

The trip is stored in the trip list under the

entered name.

5. "Delete all trips" or "Delete trip".

Selecting last trip

1. "Navigation"

2. "Stored trips"

3. "Last trip"

Selecting a stored trip

1. "Navigation"

2. "Stored trips"

3. Select the desired trip.

4. "Start guidance"

4.

"Start guidance"

Trips, changing

Changing the trip direction

Intermediate destinations are displayed in

reverse order in the list.

1. "Map"

2.

"Guidance"

3. Open "Options".

4. "Reverse order of trip dest."

142

Destination guidance

Navigation

Destination guidance

Vehicle equipment

Route criteria

In this chapter, all production, country, and

optional equipment that is offered in the model

range is described. Equipment is also described

that is not available because of, for example,

selected options or country version. This also

applies to safety related functions and systems.

General information

>

You can influence the calculated route by

selecting certain trip criteria.

Route criteria can be changed during desti-

nation entry and during route guidance.

Street types are part of the navigation data

and are taken into account in route plan-

ning, e.g. avoiding highways.

Starting destination

guidance

>

The proposed route can differ from

personal experience.

1. "Navigation"

The settings are stored for the remote

control currently in use.

2. Entering a destination, refer to page 134.

3. "Accept destination"

4. "Start guidance"

Route guidance with traffic bulletins, refer

to page 149.

The route is displayed on the Control Display

after it is calculated.

Changing route criteria

1. "Navigation"

In the map view, the distance to the destination/

intermediate destination and the estimated

time of arrival are displayed.

2. "Map"

3.

"Route preference"

The arrow display appears on the Control

Display, if so desired.

4. Selecting a criterion:

>

"Fast route": time-optimized route

through a combination of the least pos-

sible distance and stretches of road that

allow rapid driving.

Terminating destination

guidance

>

"ECO PRO route": optimized

combination of the fastest and shortest

possible route.

1. "Navigation"

2. "Map"

3.

"Guidance".

"Short route": short distance without

taking time into account.

4. "Stop guidance"

> "Alternative routes": are suggested,

where possible, during active route

guidance.

Continuing destination

guidance

The individual suggestions are labeled in

color.

If the destination was not reached during the

last trip, destination guidance can be resumed.

"Resume guidance"

143

Navigation

Destination guidance

Lane information

In the arrow display, the recommended lanes

of multi-lane roads are each marked with a

triangle.

>

Filled triangle: optimum lane.

Empty triangle: likewise possible lane. It

can, however, also be possible to briefly

make additional lane changes.

5. Select additional route criteria, if desired.

Where possible, the selected criteria will be

avoided on the route.

Displaying the list of route segments

If the route guidance has been started, then you

can display a list of route segments. The dis-

tance to be traveled and traffic bulletins are

displayed for each segment of the route.

> "Avoid highways": highways are avoided

where possible.

> "Avoid toll roads": toll roads are avoided

1. "Navigation"

where possible.

2. "Route information"

3. Highlight the route segment.

> "Avoid ferries": ferries are avoided

where possible.

The route segment is displayed in the preview

map.

The setting applies to the current route and to

the planning of future routes.

Bypassing a section of the route

During route guidance, prompt the navigation

system to bypass certain route segments. In

doing so, you will specify how many kilometers

to travel before returning to the original route.

Route

General information

Depending on your vehicle's equipment, vari-

ous views of the route are available during route

guidance:

1. "Navigation"

2. "Route information"

3. "New route for"

>

Arrow display on the Control Display.

List of route segments.

Map view, refer to page 145.

Arrow display

The following information is displayed during

route guidance:

>

Large arrow: current direction of travel.

Small arrow: indicates the next change of

direction.

>

Intersection view.

4. Turn the controller: enter the desired

mileage.

Lane information.

Traffic bulletins.

5. Press the controller.

Distance to the next change of direction.

Street name of the next change of direction.

144

Destination guidance

Navigation

Resuming the original route

Repeating a voice instruction

1. "Navigation"

If the route section should no longer be

bypassed:

2. "Map"

1. "Navigation"

3. Highlight the

symbol.

2. "Route information"

3. "New route for"

4. "Remove blocking"

4. Press the controller twice.

Adjusting volume for voice instructions

The volume can be adjusted only while a voice

instruction is being issued.

Gas station recommendations

The remaining range is calculated and filling

stations along the route are displayed.

1. Have the last voice instruction repeated, if

necessary.

Even with the most up-to-date navigation data,

information about certain special destinations

may have changed; for example, filling stations

may not be in operation.

2. Turn the button during the voice instruction

to select the desired volume.

1. "Navigation"

2. "Route information"

3. "Recommended refuel"

A list of filling stations is displayed.

4. Select a gas station.

5. Select the

symbol.

6. "Start guidance": route guidance to the

selected filling station is started.

The setting is stored for the remote control cur-

rently in use.

"Add as another destination": the filling sta-

tion is incorporated into the route.

Map view

Destination guidance

through voice instructions

Displaying the map view

1. "Navigation"

2. "Map"

Switching voice instructions on/off

Voice instructions can be switched on or off

during destination guidance.

Overview

1. "Navigation"

2. "Map"

3.

"Voice instructions"

For rapid access, the feature can be stored on a

programmable memory key, refer to page 25.

145

Navigation

Destination guidance

1

2

3

4

5

6

7

Toolbar

Route segment with traffic obstruction

Road sign for traffic obstruction

Planned route

The following functions are available directly in

the map view:

Symbol

Function

Starting/stopping destination

guidance

Current location

Upper status box

Switching voice instructions on/

off

Lower status box

Changing route criteria or

selecting route alternatives

Lines on the map

Streets and roads are depicted with different

colors and lines according to their classification.

Dotted lines represent railroad and ferry con-

nections. National borders are depicted with

thin lines.

Special destinations

Displaying traffic bulletins

Interactive map

Map view settings

Changing scale

Traffic obstructions

Small triangles along the planned route identify

route segments with traffic obstructions,

depending on map scale. The direction of the

triangles indicates the direction of the obstruc-

tion.

Changing the map section

"Interactive map"

>

To shift the map: move the controller in the

required direction.

Road signs classify the obstructions.

>

Red road sign: the obstruction relates to the

planned route or direction of travel.

To shift the map diagonally: move the con-

troller in the required direction and turn it.

>

Gray road sign: the obstruction does not

relate to the planned route or direction of

travel.

Changing scale

1. Select the

symbol.

Traffic bulletins, refer to page 147.

2. Turn the controller to adjust the scale.

Planned route

Automatic scaling of the map

After route guidance is started, the planned

route is displayed on the map.

In the map view facing north, turn the controller

in any direction until AUTO is displayed as the

map scale.

The map shows the entire range from your

location to the destination.

Status boxes

Show/hide: press the controller.

>

Upper status box: time, phone details, and

entertainment details.

Settings for the map view

The map is shown on the Control Display.

1. Open "Options".

Lower status box: symbol for active route

guidance, traffic bulletin status, arrival time,

and distance from destination.

2. "Settings"

Set the optimized map view.

146

Destination guidance

Navigation

>

"Day/night mode"

Select and adjust depending on light

conditions.

Traffic bulletins

Overview

"Traffic conditions/gray map" active:

Settings are not taken into account.

>

You can display the traffic bulletins from

radio stations that broadcast the TMC

(Traffic Message Channel) of a traffic infor-

mation service. Bulletins about traffic

obstructions and hazards are continuously

updated.

"Satellite images"

Depending on the availability and resolu-

tion, satellite images are displayed in scales

of approx. 1 mile to 600 miles/2 km to

1,000 km.

>

Traffic bulletins are indicated by symbols on

the map.

>

"Perspective view in 3D"

Displays a three-dimensional view. Promi-

nent areas that are contained in the naviga-

tion data are displayed on the map in 3D.

Traffic bulletins for the surrounding area are

stored in a list.

The symbol in the toolbar of the map view

turns red if a traffic bulletin relates to the

calculated route.

"Traffic conditions/gray map"

The map is optimized for displaying traffic

bulletins. Symbols for the special destina-

tions are no longer displayed.

Real Time Traffic Information End-User

Provisions

Map view for the split screen display

Certain BMW models equipped with navigation

have the capability to display real-time traffic

information. If your system has this capability

the following additional terms and conditions

apply:

The map view for the split screen can be

selected separately from the main screen.

1. Open "Options".

2. "Split screen"

An End-User shall no longer have the right to

use the Traffic Data in the event that the End-

User is in material breach of the terms and

conditions contained herein.

3. Move the controller to the right repeatedly

until the split screen content is selected.

4. Select "Split screen content" or scale.

5. Select the map view:

> "Arrow display"

A. Total Traffic Network, a division of Clear

Channel Broadcasting, Inc. ("Total Traffic Net-

work") holds the rights to the traffic incident

data and RDS-TMC network through which it is

delivered. You may not modify, copy, scan or

use any other method to reproduce, duplicate,

republish, transmit or distribute in any way any

portion of traffic incident data. You agree to

indemnify, defend and hold harmless BMW of

North America, LLC. ("BMW NA") and Total

Traffic Network, Inrix, Inc (and their affiliates)

against any and all claims, damages, costs or

other expenses that arise directly or indirectly

out of (a) your unauthorized use of the traffic

> "Map facing north"

> "Map direction of travel"

> "Map view with perspective"

> "Position"

> "Exit ramp view"

> "Traffic conditions/gray map"

6. To change the scale: switch to the split

screen and turn the controller.

147

Navigation

Destination guidance

incident data or the RDS-TMC network, (b) your

violation of this directive and/or (c) any unautho-

rized or unlawful activities by you in connection

herewith.

Accessing traffic bulletins

1. "Navigation"

2. "Map"

3.

"Traffic Info"

B. Total Traffic Network traffic data is informa-

tional only. User assumes all risk of use. Total

Traffic Network, BMW NA, and their suppliers

make no representations about content, traffic

and road conditions, route usability, or speed.

First, the traffic bulletins for the calculated

route are displayed.

The traffic bulletins are sorted in the order

of their distance from the current vehicle

position.

C. The licensed material is provided to license

"as is," and "where is". Total Traffic Network,

including, but not limited to, any and all third

party providers of any of the licensed material,

expressly disclaims, to the fullest extent permit-

ted by law, all warranties or representations

with respect to the licensed material (including,

without limitation, that the licensed material will

be error-free, will operate without interruption

or that the traffic data will be accurate), express,

implied or statutory, including, without limita-

tion, the implied warranties of merchantability,

non-infringement fitness for a particular pur-

pose, or those arising from a course of dealing

or usage of trade.

4. Select a traffic bulletin.

"More information":

Display additional information.

5. Scroll to the next or previous traffic bulletin

if desired.

Traffic bulletins on the map

"Traffic conditions/gray map" active: the Con-

trol Display changes to a grayscale display. This

enables a better view of the traffic bulletins. The

day/night mode is disregarded in this setting.

Symbols or special destinations are no longer

displayed.

1. "Navigation"

D. Neither Total Traffic Network, Inrix, Inc. nor

BMW NA will be liable to you for any indirect,

special, consequential, exemplary, or incidental

damages (including, without limitation, lost rev-

enues, anticipated revenues, or profits relating

to the same) arising from any claim relating

directly or indirectly to use of the traffic data,

and even if Total Traffic Network, Inrix, Inc., or

BMW NA are aware of the possibility of such

damages. These limitations apply to all claims,

including, without limitation, claims in contract

and tort (such as negligence, product liability

and strict liability). Some states do not allow the

exclusion or limitation of incidental or conse-

quential damages, so those particular limita-

tions may not apply to you.

2. "Map"

3. Open "Options".

4. "Settings"

5. "Traffic conditions/gray map"

Symbols in the map view

Depending on the scale of the map and the

location of the traffic obstruction along the

route, the symbols for the traffic obstructions

are displayed.

Additional information in the map view

Depending on the map scale, a traffic obstruc-

tion's length, direction and impact are displayed

on the map using triangles or gray bars along

the calculated route.

Activating/deactivating reception

1. "Navigation"

>

Red: traffic congestion

Orange: stop-and-go traffic

Yellow: heavy traffic

2. Open "Options".

3. "Receive Traffic Info"

148

Destination guidance

Navigation

>

Green: clear roads

The upper part of the message shows:

Gray: general traffic information, e.g.

construction zone

>

The symbol of the first traffic obstruction,

possibly with the remaining distance before

the start of the traffic obstruction.

The bulletins displayed depend in the respec-

tive traffic information service.

>

Total length of traffic obstructions on the

route.

Filtering traffic bulletins

Extension of driving time due to the traffic

obstructions

Set which traffic bulletins are displayed on the

map.

The lower part of the message shows:

1. "Navigation"

>

Suggested alternate route with remaining

distance before the start of the alternate

route.

2. "Map"

3. Open "Options".

4. "Traffic Info categories"

5. Select the desired categories.

>

Difference of the route length compared to

the original route.

Time gained by taking the alternate route

compared to the original route with the

traffic obstructions.

In addition to the original route displayed in

white, the split screen will also show the alter-

nate route.

Taking an alternate route:

"Detour"

With particular hazards, e.g. objects on the

roadway, a message is displayed without a

possible alternate route.

Traffic bulletins from the selected categories

are displayed on the map.

It is also possible to take alternate routes can

also be taken if the traffic reports are accessed

via the list:

>

Traffic bulletins that lie on the route are

always shown.

>

For your personal safety, it is not possible to

hide traffic bulletins that announce a poten-

tial hazard.

1. "Navigation"

2. "Map"

3.

4. "Detour information"

5. "Detour"

"Traffic Info"

Route guidance with traffic bulletins

Semi-dynamic route guidance

With traffic bulletin reception switched on,

semi-dynamic route guidance is active.

Dynamic destination guidance

The route is automatically changed in the event

of traffic obstructions.

The system takes into account the existing traf-

fic bulletins during route guidance. A message

is displayed as a function of the route, the traffic

bulletins, and the possible alternate routes. In

the event of a traffic obstruction, an alternate

route will be suggested if possible.

>

The system does not point out traffic

obstructions along the original route.

>

Traffic bulletins will continue to be dis-

played on the map.

149

Navigation

Destination guidance

>

Depending on the type of road and the

nature and length of the traffic obstruction,

the route can also be calculated so that you

travel through the traffic obstruction.

Certain hazards are displayed regardless of

the setting.

To activate dynamic route guidance:

1. "Navigation"

2. Open "Options".

3. "Dynamic guidance"

150

What to do if …

Navigation

What to do if …

The area has not been fully recorded yet, or

you have left the recommended route and

the system requires a few seconds to calcu-

late a new route suggestion.

Vehicle equipment

In this chapter, all production, country, and

optional equipment that is offered in the model

range is described. Equipment is also described

that is not available because of, for example,

selected options or country version. This also

applies to safety related functions and systems.

What to do if…

>

The current position cannot be displayed?

The position is in an unrecognized region, in

a poor reception area, or the system is in the

process of determining the position.

Reception is generally available when you

are in the open.

>

The destination guidance does not accept a

destination without a street name?

A downtown area cannot be determined for

the town or city that has been entered. Input

any street in the selected town/city and

start destination guidance.

>

The destination guidance does not accept a

destination?

The destination data is not contained in the

navigation data. Choose a destination as

close as possible to the original one.

The letters for a destination cannot be

selected during destination entry?

The stored data do not contain the data of

the destination. Select a destination that is

as close as possible to the original.

The map view is displayed in grayscale?

"Traffic conditions/gray map" active: the

Control Display changes to a grayscale

display. This enables a better view of the

traffic bulletins.

Voice instructions are no longer issued

before intersections during destination

guidance?

151

Navigation for Your BMW 1 Series 4 Door Second Generation (2011-2019)

Related Topics

Popular Owner Manuals

Latest Owner Manuals