Get CONTROLS -> Interior equipment Guide for BMW 1 Series 4 Door Third Generation (2019-2024)

Interior equipment

CONTROLS

Interior equipment

Vehicle equipment

Ashtrays

This chapter describes all standard, country-spe‐

cific and optional equipment available for the

model series. It may therefore describe equip‐

ment and functions which are not installed in

your vehicle, for example on account of the spe‐

cial equipment selected or the country specifica‐

tion. This also applies to safety-relevant func‐

tions and systems. Please comply with the

relevant laws and regulations when using the

corresponding functions and systems.

Front centre console

Opening

Sun visor

The ashtray is located in one of the cup holders.

Fold the cover of the ashtray upwards.

Glare protection

Fold the sun visor downwards or upwards.

Emptying

Protection from glare at the side

Folding out

1. Fold down the sun visor.

2. Unhook the sun visor from its holder and

pivot it sideways to the side window.

Folding up

To close the sun visor, proceed in reverse order.

With the cover closed, pull the ashtray out of the

cup holder.

Vanity mirror

A vanity mirror is located behind a cover in the

sun visor. The mirror light switches on when the

cover is opened.

236

Interior equipment

CONTROLS

Lighter

Sockets

Safety notes

Principle

The cigarette lighter attachment can be used as

a socket for electrical devices when standby

state or drive-ready state is switched on.

WARNING

Contact with the hot heating element or the hot

socket of the lighter can cause burns. Flamma‐

ble materials can catch fire if the lighter is drop‐

ped or is held against objects. There is a risk of

fire and injury. There is a risk of material dam‐

age. Take hold of the lighter by its handle. En‐

sure that children do not use the lighter.

General

The total load of all sockets must not exceed

140 watts at 12 volts.

To avoid damage to the socket, do not insert an

incompatible plug.

Safety notes

NOTE

If metallic objects fall into the socket, they can

cause a short circuit. There is a risk of material

damage. After using the socket, re-fit the

lighter or socket cover.

WARNING

Devices and cables, for example portable navi‐

gation devices, that are located in the deploy‐

ment range of the airbags may impede airbag

deployment or be thrown around the vehicle in‐

terior when the airbag is deployed. There is a

risk of injury. Make sure that devices and cables

are not in the deployment range of the airbags.

Front centre console

NOTE

Battery chargers for the vehicle battery may

operate with high voltages and high currents

which can overload or damage the 12-volt on-

board network. There is a risk of material dam‐

age. Only connect battery chargers for the ve‐

hicle battery to the starting aid terminals in the

engine compartment.

The lighter is located between the cupholders.

Operation

Press in the lighter.

NOTE

The lighter can be removed when

it pops back out.

If metallic objects fall into the socket, they can

cause a short circuit. There is a risk of material

damage. After using the socket, re-fit the

lighter or socket cover.

237

Interior equipment

CONTROLS

Front centre console

In the centre armrest

The socket is located between the cupholders.

Pull off the cover.

There is a USB port in the centre armrest.

Properties:

▷ USB port type C.

Inside the luggage compartment

▷ For charging mobile devices.

▷ Charging current: max. 3 A.

In the front centre console

NOTE

Objects in the storage compartment, for exam‐

ple large USB connectors, can block or damage

the cover on opening and closing. There is a

risk of material damage. When opening and

closing, make sure that the area of movement

of the cover is kept clear.

There is a socket on the right side of the luggage

compartment. Open the cap.

USB port

General

Please comply with the notes on connecting mo‐

bile devices to the USB port in the chapter on

USB connections, see page 62.

There is a USB port in the centre console.

Properties:

▷ USB port type A.

▷ For charging mobile devices and transferring

data.

▷ Charge current: maximum 1.5 A.

238

Interior equipment

CONTROLS

rupted. Observe the relevant information in the

operating instructions for the mobile telephone.

In the rear centre console

If the vehicle is equipped with a charge indi‐

cator, the Control Display shows whether a Qi-

compatible mobile telephone is being charged.

Safety notes

WARNING

When charging a Qi-compatible device in the

wireless charging dock, any metal objects loca‐

ted between the device and the dock can be‐

come very hot. If storage media or electronic

cards, for example smart cards, cards with

magnetic strips or cards for transmitting sig‐

nals, are placed between the device and the

dock, this may impair card function. There is a

risk of injury and material damage. When charg‐

ing mobile devices, make sure there are no ob‐

jects between the device and the dock.

There are two USB ports in the rear centre con‐

sole.

Properties:

▷ USB port type C.

▷ For charging mobile devices.

▷ Charging current: max. 3 A per port.

Wireless charging dock

Principle

The wireless charging dock permits the following

functions to be performed wirelessly:

NOTE

The dock is designed for mobile telephones up

to a certain size. Using excessive force when

inserting the mobile telephone may damage

the dock or the mobile telephone. There is a

risk of material damage. Observe the maximum

dimensions for the mobile telephone. Do not

force the mobile telephone into the dock.

▷ Charging of Qi-compatible mobile phones or

other mobile devices which support the Qi

standard.

▷ Connection of the mobile telephone to the

external aerial.

This ensures better network reception and a

consistent reproduction quality, depending

on the country.

Overview

Tray in the centre console:

General

When inserting the mobile telephone, make sure

there are no objects between it and the wireless

charging dock.

During charging, the surface of the dock and the

mobile telephone can become hot. At higher

temperatures, the charging current through the

mobile telephone may be reduced; in exceptional

cases, the charging process is temporarily inter‐

239

Interior equipment

CONTROLS

Removing: pull the mobile telephone out behind

the holding clip.

Removing the holding clip

The holding clip can be removed, for example to

clean or to take out objects placed in the dock by

mistake.

1

2

Holding clip

Storage area

Operating requirements

▷ The mobile telephone must support and be

compatible with the required Qi standard.

If the mobile telephone does not support the

Qi standard, the mobile telephone can be

charged using a special Qi-compatible charg‐

ing pad.

Press and hold the release buttons, arrows 1, si‐

multaneously and pull off the holding clip, ar‐

row 2.

▷ Standby state is switched on.

Forgotten phone warning

General

If the vehicle is equipped with the forgotten

phone warning function, a warning can be output

if a mobile telephone with Qi capability has been

left in the wireless charging dock when exiting

the vehicle.

▷ Note the maximum dimensions of the mobile

telephone.

▷ Only use protective sleeves and covers up to

a maximum thickness of 2 mm, 0.07 in. Oth‐

erwise, charging function may be impaired.

▷ The mobile telephone to be charged is loca‐

ted in the middle of the dock and has been

pushed as far back behind the holding clip as

possible.

The forgotten phone warning is shown in the in‐

strument cluster.

Operation

Activating

Via iDrive:

Inserting/removing the mobile

telephone

1. "My Vehicle"

The maximum size for the mobile telephone in‐

cluding case or protective sleeve is approxi‐

mately 154.5 x 80 x 12 mm, 6.06 x 3.1 x 0.47 in.

2. "iDrive settings"

3. "Wireless charging tray"

4. "Forgotten mobile device alert"

Inserting: place the mobile telephone in the cen‐

tre of the dock with the display facing upwards

and push it down behind the holding clip as far

as it will go.

System limits

If the mobile phone or the vehicle interior is ex‐

posed to excessively high temperatures, the

charging functions of the mobile telephone

240

Interior equipment

CONTROLS

might be restricted and functions might no lon‐

ger work.

241

CONTROLS -> Interior equipment for Your BMW 1 Series 4 Door Third Generation (2019-2024)

Related Topics

Popular Owner Manuals

Latest Owner Manuals