Get Controls -> Opening and closing Guide for BMW 6 Series 4 Door Fourth Generation (2017-2023)

Controls

Opening and closing

WARNING

Vehicle features and options

Unlocking from the inside is only possi‐

ble with special knowledge.

This chapter describes all standard, country-

specific and optional features offered with the

series. It also describes features that are not

necessarily available in your vehicle, e. g., due

to the selected options or country versions.

This also applies to safety-related functions

and systems. When using these functions and

systems, the applicable laws and regulations

must be observed.

Persons who spend a lengthy time in the vehi‐

cle while being exposed to extreme tempera‐

tures are at risk of injury or death. Do not lock

the vehicle from the outside when there are

people in it.◀

WARNING

Unattended children or animals can

cause the vehicle to move and endanger them‐

selves and traffic, e.g., due to the following ac‐

tions:

Remote control

▷

Pressing the Start/Stop button.

Releasing the parking brake.

General information

The vehicle is supplied with two remote con‐

trols with integrated key.

Opening and closing the doors or win‐

dows.

Each remote control contains a replaceable

battery. Replace the battery, refer to

page 36.

▷

Engaging selector lever position N.

Using vehicle equipment.

You may set the key functions depending on

the optional features and country-specific ver‐

sion. Settings, refer to page 44.

There is a risk of accidents or injuries. Do not

leave children or animals unattended in the ve‐

hicle. Take the remote control with you when

exiting and lock the vehicle.◀

The vehicle stores personal settings for every

remote control. Personal Profile, refer to

page 42.

Overview

The remote controls hold information about re‐

quired maintenance. Service data in the re‐

mote control, refer to page 230.

Safety information

WARNING

People or animals in the vehicle can lock

the doors from the inside and lock themselves

in. In this case, the vehicle cannot be opened

from the outside. There is a risk of injury. Take

the remote control with you so that the vehicle

can be opened from the outside.◀

1

2

Unlocking

Locking

34

Opening and closing

Controls

Locking

1. Close the driver's door.

3

4

Open tailgate

Press briefly: headlight courtesy delay fea‐

ture

2.

▷

Press button on the remote control.

Press and hold: panic mode

All doors, the tailgate, and the fuel filler flap

are being locked.

Unlocking

▷

With anti-theft protection: Anti-theft pro‐

tection is switched on. It prevents the

doors from being unlocked using the lock

buttons or the door openers.

Press button on the remote control.

Depending on the settings, refer to page 44,

the following access points are unlocked.

▷

The alarm system, refer to page 45, is

switched on.

▷

Driver's door and fuel filler flap.

If the engine or ignition is still switched on

when you lock the vehicle, the vehicle horn

honks twice. In this case, the engine or ignition

must be switched off by means of the Start/

Stop button.

Press the button of the remote control

again to unlock the other vehicle access

points.

▷

All doors, tailgate, and fuel filler flap.

In addition, the following functions are exe‐

cuted:

Lock

▷

The settings saved in the driver profile, re‐

fer to page 42, are applied.

Press button on the remote control with

the vehicle locked.

▷

The interior lights and courtesy lights are

activated. This function is not available, if

the interior lights were switched off man‐

ually.

This function is not available, if the interior

lamps were switched off manually.

The light functions may depend on the ambi‐

ent brightness.

▷

The welcome lights are switched on, if this

function was activated.

If the button is pressed again within 10 sec‐

onds after vehicle was locked, the interior mo‐

tion sensor and tilt alarm sensor of the anti-

theft warning system, refer to page 46, are

turned off. After locking, wait 10 seconds be‐

fore pressing the button again.

With anti-theft protection: Anti-theft pro‐

tection is switched off.

The alarm system, refer to page 45, is

switched off.

The light functions may depend on the ambi‐

ent brightness.

Tailgate

Convenient opening

General information

Press and hold this button on the re‐

mote control after unlocking.

To avoid locking it in the vehicle, do not place

the remote control in the cargo area.

Depending on your vehicle's equipment and

the country version, it is possible to specify

whether the doors are also unlocked when un‐

locking with the remote control. Adjusting the

settings, refer to page 44.

The windows are opened, the glass sunroof is

tilted and the sliding visor moves back, as long

as the button on the remote control is pressed.

35

Controls

Opening and closing

lift the cover with a lever movement of the

integrated key, arrow 2.

Safety information

WARNING

Body parts can be jammed when operat‐

ing the tailgate. There is a risk of injury. Make

sure that the area of movement of the tailgate

is clear during opening and closing.◀

NOTE

During opening, the tailgate pivots back

and up. There is a risk of property damage.

Make sure that the area of movement of the

tailgate is clear during opening and closing.◀

3. Push battery in the direction of the arrow

using a pointed object and lift it out.

Opening

Press button on the remote control for

approx. 1 second.

Panic mode

You can trigger the alarm system if you find

yourself in a dangerous situation.

Press button on the remote control for

at least 3 seconds.

4. Insert a type CR 2450 battery with the pos‐

itive side facing up.

To switch off the alarm: press any button.

5. Press the cover closed.

6. Push the integrated key into the remote

control until it engages.

Switching on the headlamp courtesy

delay feature

Have old batteries disposed of by a

dealer’s service center or another

qualified service center or repair shop

or take them to a collection point.

Briefly press the button on the remote

control.

Set length of time, refer to page 103.

Replacing the battery

1. Remove the integrated key from the re‐

mote control, refer to page 38.

Additional remote controls

Additional remote controls are available from a

dealer’s service center or another qualified

service center or repair shop.

2. Place the integrated key underneath the

battery compartment cover, arrow 1, and

Loss of the remote controls

A lost remote control can be blocked and re‐

placed by a dealer’s service center or another

qualified service center or repair shop.

36

Opening and closing

Controls

Malfunction

Starting the engine via emergency

detection of the remote control

General information

A Check Control message is displayed.

Remote control detection by the vehicle may

malfunction under the following circumstan‐

ces:

▷

The battery of the remote control is dis‐

charged. Replacing the battery, refer to

page 36.

Interference of the radio connection from

transmission towers or other equipment

with high transmitting power.

1. Hold the remote control with its back

against the marked area on the steering

column.

Shielding of the remote control due to

metal objects.

2. Start the engine within 10 seconds.

If the remote control is not detected, slightly

change the position of the remote control and

repeat the procedure.

Do not transport the remote control to‐

gether with metal objects.

▷

Interference of the radio connection from

mobile phones or other electronic devices

in direct proximity to the remote control.

Integrated key

Do not transport the remote control to‐

gether with electronic devices.

General information

▷

Interference of radio transmission by a

charging process of mobile devices, for in‐

stance charging of a mobile phone.

The driver's door can be locked and unlocked

without remote control using the integrated

key.

The remote control is in direct proximity of

the wireless charging tray.

The integrated key can also be used for the

storage compartment in the center armrest.

Place the remote control down at a differ‐

ent location.

Safety information

In the case of interference, the vehicle can be

unlocked and locked from the outside with the

integrated key, refer to page 37.

WARNING

Unlocking from the inside is only possi‐

ble with special knowledge.

Persons who spend a lengthy time in the vehi‐

cle while being exposed to extreme tempera‐

tures are at risk of injury or death. Do not lock

the vehicle from the outside when there are

people in it.◀

NOTE

The door lock is permanently joined with

the door. The door handle can be moved.

When pulling the door handle with the inte‐

37

Controls

Opening and closing

grated key inserted, paint or key can be dam‐

aged. There is a risk of property damage. Re‐

move the integrated key before pulling the

outside door handle.◀

tion, if needed, through emergency detection

of the remote control, refer to page 37.

Button for central locking

system

Removing

General information

In the event of a severe accident, the vehicle is

automatically unlocked. The hazard warning

system and interior lights come on.

Overview

Press the button, arrow 1, and pull out the inte‐

grated key, arrow 2.

Locking/unlocking via the door lock

Button for the central locking system.

Unlocking and locking

Press button. For locking, the doors must be

closed.

▷

The fuel filler flap remains unlocked.

Unlock or lock the driver's door via the door

lock using the integrated key.

The vehicle is not secured against theft

when locking.

The other doors must be unlocked or locked

from the inside.

Opening

▷

Press button to unlock the doors

together, and then pull the door handle

above the armrest.

Alarm system

The alarm system is not switched on if the ve‐

hicle is locked with the integrated key.

▷

On the door to be opened, pull the door

handle twice: the first time unlocks the

door, the second time opens it. The other

doors remain locked.

The alarm system is triggered when the door is

opened, if the vehicle has been unlocked via

the door lock.

In order to stop the alarm, unlock the vehicle

with the remote control or switch on the igni‐

38

Opening and closing

Locking

Controls

Comfort Access

Concept

The vehicle can be accessed without activat‐

ing the remote control.

All you need to do is to have the remote con‐

trol with you, such as in your pants pocket.

The vehicle automatically detects the remote

control when it is in close proximity or in the

vehicle's interior.

Touch the surface on the handle of a vehicle

door with your finger for approx. 1 second

without grasping the door handle.

General information

Comfort Access supports the following func‐

tions:

This corresponds with pressing the button

on the remote control.

▷

Unlocking and locking the vehicle.

Convenient closing.

Convenient closing

Opening tailgate.

Safety information

Functional requirements

WARNING

▷

To lock the vehicle, the remote control

must be located outside of the vehicle near

the doors.

With convenient closing, body parts can

be jammed. There is a risk of injury. Make sure

that the area of movement of the doors is clear

during convenient closing.◀

▷

The next unlocking and locking cycle is not

possible until after approx. 2 seconds.

Closing

Unlocking

Touch the surface on the handle of a vehicle

door, arrow, with your finger and hold it there

without grasping the door handle.

Grasp the handle of a vehicle door completely.

This corresponds with pressing the button

on the remote control.

This corresponds with pressing and holding

the button

on the remote control.

39

Controls

Opening and closing

In addition to locking, the windows and the

glass sunroof close and the exterior mirrors

fold in.

▷

The battery of the remote control is dis‐

charged. Replace the battery, refer to

page 36.

Interference of the radio connection from

transmission towers or other equipment

with high transmitting power.

Open tailgate

General information

If you open the tailgate via Comfort Access,

locked doors will not be unlocked.

Shielding of the remote control due to

metal objects.

Do not transport the remote control to‐

gether with metal objects.

To avoid locking it in the vehicle, do not place

the remote control in the cargo area.

▷

Interference of the radio connection from

mobile phones or other electronic devices

in direct proximity to the remote control.

Safety information

WARNING

Do not transport the remote control to‐

gether with electronic devices.

Body parts can be jammed when operat‐

ing the tailgate. There is a risk of injury. Make

sure that the area of movement of the tailgate

is clear during opening and closing.◀

In the case of a malfunction, unlock and lock

the vehicle using the buttons of the remote

control or using the integrated key, refer to

page 37.

NOTE

During opening, the tailgate pivots back

and up. There is a risk of property damage.

Make sure that the area of movement of the

tailgate is clear during opening and closing.◀

Tailgate

General information

To avoid locking it in the vehicle, do not place

the remote control in the cargo area.

Opening

Depending on your vehicle's equipment and

the country version, it is possible to specify

whether the doors are also unlocked when un‐

locking with the remote control. Adjusting the

settings, refer to page 44.

Safety information

WARNING

Body parts can be jammed when operat‐

ing the tailgate. There is a risk of injury. Make

sure that the area of movement of the tailgate

is clear during opening and closing.◀

Press on the top half of the BMW label.

Malfunction

Remote control detection by the vehicle may

malfunction under the following circumstan‐

ces:

40

Opening and closing

Closing

Controls

NOTE

During opening, the tailgate pivots back

and up. There is a risk of property damage.

Make sure that the area of movement of the

tailgate is clear during opening and closing.◀

Opening and closing

Opening from the outside

Grasp the recess grip and pull tailgate down.

Locking separately

The tailgate can be locked separately using the

switch in the center armrest. If the center arm‐

rest is locked, the tailgate cannot be opened.

▷

Tailgate secured, arrow 1.

Tailgate not secured, ar‐

row 2.

▷

Without Comfort Access: unlock vehicle.

With Comfort Access: unlock the vehicle or

have the remote control with you.

Press on the top half of the BMW label.

Slide the switch into the arrow 1 position. The

tailgate is secured and decoupled from the

central locking system.

Press button on the remote con‐

trol for approx. 1 second.

This is beneficial when the vehicle is parked

using valet service. The remote control can be

handed out without the integrated key.

Depending on the setting, the doors may

also be unlocked. Unlocking with the re‐

mote control, refer to page 35.

Trunk emergency unlocking

Opening from the inside

With the vehicle stationary, press the

button in the driver's floor area.

Pull the handle inside the cargo area.

The tailgate unlocks.

41

Controls

Opening and closing

There is an additional guest profile available

that is not assigned to any remote control: it

can be used to apply settings in the vehicle

without changing the personal driver profiles.

Automatic Soft Closing

Safety information

WARNING

Body parts can be jammed while operat‐

ing the doors. There is a risk of injury. Make

sure that the area of movement of the doors is

clear during opening and closing.◀

Functional requirements

For the system to be able to identify the driver

profile associated to a particular driver, the de‐

tected remote control must be clearly allo‐

cated to the driver.

Closing

This is the case when:

Push the doors and, if applicable, the tailgate

lightly.

▷

The driver is only carrying his or her own

remote control.

The closing happens automatically.

▷

The driver unlocks the vehicle.

The driver gets into the vehicle through the

driver's door.

Personal Profile

Settings

Concept

The settings for the following systems and

functions are saved in the active profile. The

scope of storable settings depends on country

and equipment.

Via Personal Profiles, individual settings for

several drivers can be stored and called up

again when required.

▷

Unlocking and locking.

Lights.

General information

There are three driver profiles with which per‐

sonal vehicle settings can be stored. Every re‐

mote control has one of these driver profiles

assigned.

Climate control.

Radio.

Instrument cluster.

Programmable memory buttons.

Volumes, tone.

Control Display.

Navigation.

If the vehicle is unlocked using a remote con‐

trol, the assigned personal driver profile will be

activated. All settings stored in the driver pro‐

file are automatically applied.

If several drivers use their own remote control,

the vehicle will adjust the personal settings

during unlocking. These settings are also re‐

stored, if the vehicle has been used in the

meantime by a person with a different remote

control.

TV.

Park Distance Control PDC.

Rearview camera.

Side View.

Changes to the settings are automatically

saved in the driver profile currently activated.

Top View.

Head-up Display.

Driving Dynamics Control.

If another driver profile is selected via iDrive,

the settings saved in it will be applied automat‐

ically. The new driver profile is assigned to the

remote control currently used.

Driver's seat position, exterior mirror posi‐

tion, steering wheel position.

42

Opening and closing

Controls

▷

Intelligent Safety.

Using iDrive:

Active Blind Spot Detection.

Night vision.

1. "Settings"

2. "Profiles"

The active profile is selected.

3. Open "Options".

Profile management

Opening profiles

4. "Rename current profile"

Regardless of the remote control in use, a dif‐

ferent profile may be activated. This allows you

to call up personal vehicle settings if you did

not unlock the vehicle with your own remote

control.

Reset profiles

The settings of the active profile are reset to

their factory settings.

Using iDrive:

1. "Settings"

2. "Profiles"

3. Open "Options".

4. "Reset current profile"

3. Select a profile.

▷

All settings stored in the called-up profile

are automatically applied.

Exporting profiles

Most settings of the active profile can be ex‐

ported.

The called-up profile is assigned to the re‐

mote control being used at the time.

If the profile is already assigned to a differ‐

ent remote control, this profile will apply to

both remote controls.

This can be helpful for saving and retrieving

personal settings, for instance before deliver‐

ing the vehicle to a workshop. Profiles can be

taken to another vehicle equipped with the

Personal Profile function.

Using a guest profile

The guest profile is for individual settings that

are stored in none of the three personal pro‐

files.

Using iDrive:

1. "Settings"

2. "Profiles"

This can be useful for drivers who are using

the vehicle temporarily and do not have their

own profile.

3. "Export profile"

4. BMW Online: "BMW Online"

USB interface: "USB device"

Using iDrive:

1. "Settings"

2. "Profiles"

3. "Guest"

Importing profiles

Profiles exported via BMW Online can also be

imported via BMW Online.

The guest profile cannot be renamed. It is not

assigned to the current remote control.

Profiles stored on a USB storage device can be

imported via the USB interface.

Existing settings are overwritten with the im‐

ported profile.

Renaming profiles

A personal name can be assigned to every pro‐

file to avoid confusion between the profiles.

43

Controls

Opening and closing

Using iDrive:

Unlocking

1. "Settings"

2. "Profiles"

Doors

Using iDrive:

3. "Import profile"

1. "Settings"

4. BMW Online: "BMW Online"

USB interface: "USB device"

2. "Doors/key"

3.

Select the symbol.

4. Select the desired function:

Display profile list during start

The profile list can be displayed during each

start to select the desired profile.

▷

"Driver's door only"

Only the driver's door and the fuel filler

flap are unlocked. Pressing again un‐

locks the entire vehicle.

Using iDrive:

1. "Settings"

▷

"All doors"

2. "Profiles"

The entire vehicle is unlocked.

3. Open "Options".

4. "Display user list at startup"

Tailgate

Using iDrive:

System limits

1. "Settings"

A clear assignment between the remote con‐

trol and driver may not be possible in the fol‐

lowing cases, for example.

2. "Doors/key"

3.

Select the symbol.

▷

The passenger unlocks the vehicle with his

or her own remote control, but another

person is driving.

4. Select the desired function:

▷

"Tailgate"

The tailgate is opened.

"Tailgate + door(s)"

▷

The driver unlocks the vehicle via Comfort

Access and has multiple remote controls

with him or her.

▷

The tailgate is opened and the doors

are unlocked.

▷

The driver changes, but the vehicle is not

locked and unlocked.

Confirmation signals from the vehicle

Using iDrive:

Multiple remote controls are located out‐

side of the vehicle.

1. "Settings"

2. "Doors/key"

Settings

3. Deactivate or activate the desired confir‐

mation signals.

General information

▷

With alarm system:

Depending on the equipment and country-

specific variant of your vehicle, different open‐

ing and closing settings are available.

"Acoustic sig. lock/unlock"

Unlocking is signaled by one honk of

the horn.

These settings are saved in the active driver

profile, refer to page 42.

▷

"Flash when lock/unlock"

44

Opening and closing

Controls

Unlocking is signaled by two flashes,

locking by one.

▷

Acoustic alarm.

▷

By switching on the hazard warning sys‐

tem.

Automatic locking

Using iDrive:

▷

By flashing the daytime running lights.

Switching on and off

1. "Settings"

When you lock and unlock the vehicle with the

remote control or with Comfort Access, the

alarm system is switched on and off at the

same time.

2. "Doors/key"

3. Select the desired function:

▷

"Lock if no door is opened"

The vehicle locks automatically after a

short period of time if no door is

opened after unlocking.

Opening the doors with the alarm

system switched on

The alarm system is triggered when a door is

opened if the door was unlocked using the in‐

tegrated key in the door lock.

▷

"Lock after start driving"

The vehicle locks automatically after

you drive off.

Switching off the alarm, refer to page 46.

Adjusting the last seat, mirror, and

steering wheel position

Using iDrive:

Opening the tailgate with the alarm

system switched on

The tailgate can be opened even when the

alarm system is switched on.

1. "Settings"

2. "Doors/key"

After the tailgate is closed, it is locked and

monitored again provided the doors are

locked. The hazard warning system flashes

once.

3. "Last seat position autom."

When the vehicle is unlocked, the driver's seat,

exterior mirrors and steering wheel resume

their last set positions.

Panic mode

You can trigger the alarm system if you find

yourself in a dangerous situation.

Alarm system

Press button on the remote control for

at least 3 seconds.

General information

When the vehicle is locked, the vehicle alarm

system reacts to the following changes:

To switch off the alarm: press any button.

▷

Unauthorized opening of a door, the hood

or the tailgate.

▷

Movements in the interior.

Changes in the vehicle tilt, e. g., during at‐

tempts at stealing a wheel or when towing

the vehicle.

▷

Disconnected battery voltage.

The alarm system signals these changes visu‐

ally and acoustically:

45

Controls

Opening and closing

Indicator light on the interior mirror

Avoiding unintentional alarms

General information

The tilt alarm sensor and interior motion sen‐

sor can trigger an alarm, although no unauthor‐

ized action occurred.

Possible situations for an unwanted alarm:

▷

In automatic vehicle washes.

In duplex garages.

During transport on trains carrying vehi‐

cles, at sea or on a trailer.

▷

The indicator light flashes briefly every

2 seconds:

▷

With animals in the vehicle.

The alarm system is switched on.

The tilt alarm sensor and the interior motion

sensor can be switched off in such situations.

Indicator light flashes for approx. 10 sec‐

onds, then it flashes briefly every 2 sec‐

onds:

Switching off the tilt alarm sensor and

interior motion sensor

Interior motion sensor and tilt alarm sensor

are not active, as doors, hood, or tailgate

are not correctly closed. Correctly closed

access points are secured.

Press the remote control button again

within 10 seconds as soon as the vehicle

is locked.

When the still open access points are

closed, interior motion sensor and tilt alarm

sensor will be switched on.

The indicator lamp lights up for approx. 2 sec‐

onds and then continues to flash.

The tilt alarm sensor and interior motion sen‐

sor are turned off until the vehicle is locked

again.

▷

The indicator light goes out after unlock‐

ing:

The vehicle has not been tampered with.

The indicator light flashes after unlocking

until the engine ignition is switched on, but

no longer than approx. 5 minutes:

Switching off the alarm

▷

Unlock the vehicle with the remote control

or switch on the ignition, if needed through

emergency detection of remote control, re‐

fer to page 37.

An alarm has been triggered.

Tilt alarm sensor

The tilt of the vehicle is monitored.

▷

With Comfort Access:

If you are carrying the remote control on

your person, grasp the door handle on the

driver's or front passenger door com‐

pletely.

The alarm system responds in situations such

as attempts to steal a wheel or when the vehi‐

cle is towed.

Interior motion sensor

The windows and the glass sunroof must be

closed for the system to function properly.

46

Opening and closing

Controls

The window opens while the switch is be‐

ing held.

Power windows

Safety information

▷

Press the switch beyond the resist‐

ance point.

WARNING

When operating the windows, body parts

and objects can be jammed. There is a risk of

injury or risk of property damage. Make sure

that the area of movement of the windows is

clear during opening and closing.◀

The window opens automatically. Pressing

the switch again stops the motion.

Convenient opening via the remote control, re‐

fer to page 35.

Closing

WARNING

Unattended children or animals can

cause the vehicle to move and endanger them‐

selves and traffic, e.g., due to the following ac‐

tions:

▷

Pull the switch to the resistance

point.

The window closes while the switch is be‐

ing held.

▷

Pressing the Start/Stop button.

Releasing the parking brake.

▷

Pull the switch beyond the resistance

point.

Opening and closing the doors or win‐

dows.

The window closes automatically. Pulling

again stops the motion.

▷

Engaging selector lever position N.

Using vehicle equipment.

Closing by means of Comfort Access, refer to

page 39.

There is a risk of accidents or injuries. Do not

leave children or animals unattended in the ve‐

hicle. Take the remote control with you when

exiting and lock the vehicle.◀

Pinch protection system

General information

If closing force exceeds a specific threshold as

a window closes, closing is interrupted.

Overview

The window opens slightly.

Safety information

WARNING

Accessories on the windows such as an‐

tennas can impact jam protection. There is a

risk of injury. Do not install accessories in the

area of movement of the windows.◀

Power windows

Opening

▷

Press the button to the resistance

point.

47

Controls

Opening and closing

Closing without the jam protection

system

In case of danger from the outside or if ice

might prevent normal closing, proceed as fol‐

lows:

Glass sunroof, electric with

tilt function

General information

The glass sunroof and the sliding visor can be

operated together or separately using the

same switch.

1.

2.

Pull the switch past the resistance

point and hold it there.

The glass sunroof is operational when the igni‐

tion is switched on.

The window closes with limited jam pro‐

tection . If the closing force exceeds a spe‐

cific threshold, closing is interrupted.

Safety information

WARNING

Pull the switch past the resistance

point again within approx. 4 seconds and

hold it there.

Body parts can be jammed when operat‐

ing the glass sunroof. There is a risk of injury.

Make sure that the area of movement of the

glass sunroof is clear during opening and clos‐

ing.◀

The window closes without jam protec‐

tion .

WARNING

Roller sunblind

Unattended children or animals can

cause the vehicle to move and endanger them‐

selves and traffic, e.g., due to the following ac‐

tions:

General information

If you are no longer able to move the roller sun‐

blind for the rear window after having activated

it a number of times in a row, the system is

blocked for a limited time to prevent overheat‐

ing. Let the system cool.

▷

Pressing the Start/Stop button.

Releasing the parking brake.

Opening and closing the doors or win‐

dows.

The roller sunblind for the rear window cannot

be moved at low interior temperatures.

▷

Engaging selector lever position N.

Using vehicle equipment.

Driver's door controls

There is a risk of accidents or injuries. Do not

leave children or animals unattended in the ve‐

hicle. Take the remote control with you when

exiting and lock the vehicle.◀

Roller sunblind for rear window

Press button.

48

Opening and closing

Controls

Overview

Jam protection system

General information

If the closing force exceeds a specific value as

a glass sunroof closes, the closing action is in‐

terrupted. The glass sunroof is tilted again.

Closing without the jam protection

system

If there is an external danger or

if, for instance icing prevents au‐

tomatic closing, push the switch

forward past the resistance

point and hold it.

Tilting up and closing glass sunroof

▷

Push switch briefly upward.

The closed glass sunroof

tilts and the sliding visor

opens slightly.

The glass sunroof closes without jam protec‐

tion . Make sure that the closing area is clear.

Initializing after a power interruption

General information

After a power failure during the opening or

closing process, the glass sunroof can only be

operated to a limited extent.

▷

Briefly press out the switch

twice in succession toward

the rear past the resistance

point.

The closed glass sunroof

tilts and the sliding visor

moves all the way back.

The system can be initialized under the follow‐

ing conditions.

▷

To close the switch, press upward briefly

or twice forward past the resistance point.

▷

The vehicle is parked in a horizontal posi‐

tion.

Convenient opening via the remote control, re‐

fer to page 35.

▷

The engine is running.

The external temperature is above

41 ℉/5 ℃.

Closing by means of Comfort Access, refer to

page 39.

During initialization, the glass sunroof closes

without jam protection .

Opening/closing the sliding visor

Make sure that the closing area is clear.

▷

Press the switch in the de‐

sired direction to the resist‐

ance point and hold it there.

Initializing the system

The sliding visor moves, as

long as the switch is held

down.

Press the switch up and hold it

until the initialization is com‐

plete:

▷

Press the switch in the desired direction

past the resistance point.

Initialization begins within

15 seconds and is completed

when the glass sunroof and sliding visor are

completely closed.

The sliding visor moves automatically.

Pressing the switch upward stops the motion.

49

Controls -> Opening and closing for Your BMW 6 Series 4 Door Fourth Generation (2017-2023)

Related Topics

Controls

Popular Owner Manuals

Latest Owner Manuals