Increasing the range
DRIVING TIPS
ECO PRO
Switch off any functions that are
not currently needed
▷ Reduction of the heating output and switch-
on duration for exterior mirrors, rear window,
and seat heating.
Functions such as the rear window defroster re‐
quire a lot of energy and reduce the range, espe‐
cially in city and stop-and-go traffic.
▷ Reduction of the cooling or heating output of
the air conditioner.
▷ The speed is limited to an adjustable maxi‐
mum value between 50 mph/80 km/h and
80 mph/130 km/h. To intentionally exceed
the speed limit, press the accelerator pedal all
the way down.
Switch off these functions if they are not needed.
The ECO PRO and ECO PRO+ drive modes
support the energy-conserving use of comfort
features. They automatically perform a partial or
complete deactivation of these functions.
ECO PRO+
Additionally, activating ECO PRO+ will limit the
following functions:
Have maintenance carried out
Have the vehicle maintained regularly to achieve
optimal vehicle efficiency and service life. BMW
recommends that maintenance work be per‐
formed by a BMW service center.
▷ The cooling and heater output of the heating
and air conditioning system will be deacti‐
vated.
▷ The seat heating is deactivated.
For information on the BMW Maintenance Sys‐
tem, refer to page 246.
▷ The maximum speed is limited to
55 mph/90 km/h. In special situations, the
speed limit can be consciously exceeded by
applying the accelerator pedal.
ECO PRO and ECO PRO+
Activating ECO PRO and ECO PRO+
Concept
Press the button repeatedly, until ECO
PRO or ECO PRO+ is displayed in the
instrument cluster.
ECO PRO and ECO PRO+ support an efficient
driving style. To this end, the control of the drive
is optimized for moderate acceleration, and
adapted to lighting and comfort features, such as
climate control output. Some vehicle functions
cannot be used during activated drive mode
ECO PRO and ECO PRO+.
Configuring ECO PRO
Via the Driving Dynamics Control
1. Activate ECO PRO.
In addition, context-sensitive instructions are dis‐
played to assist with an efficient driving style.
2. "Configure ECO PRO"
3. Select the desired setting.
General information
ECO PRO and ECO PRO+ drive modes each
have different settings.
Via iDrive
1. "My Vehicle"
2. "Vehicle settings"
3. "Configure ECO PRO"
4. Select the desired setting.
204