Seats, mirrors and steering wheel
CONTROLS
Integrated key, refer to page 76.
Installing the head restraints
For installation, insert the head restraints in
the mounts and slide them down until you feel
resistance.
Exterior mirrors
General information
The front passenger's side exterior mirror is
more curved than the driver's side mirror.
4. Press and hold the integrated key and the
button at the same time, arrows 1, and pull
out the head restraint completely.
The exterior mirror adjustment is stored in the
active BMW ID or in the active driver profile. If
the BMW ID or the driver profile is reactivated
at a later time, the stored position is called up
automatically.
The current exterior mirror adjustment can be
stored using the memory function.
Depending on vehicle equipment, the driver's
side exterior mirror also dims automatically.
Photocells in the interior mirror are used to
control this.
Depending on vehicle equipment, both exterior
mirrors are heated automatically as necessary
and when drive-ready state is on.
Removing the center head restraint
Only remove the head restraint if no one will be
sitting in the center seat.
Safety information
1. Raise the head restraint up against the re-
sistance.
2. Press the buttons, arrow 1, and pull the
head restraint out completely.
Warning
Objects in the mirror are closer than they ap-
pear. The distance to the road users behind
could be incorrectly estimated, for instance
while changing lanes. There is a risk of acci-
dent, injury, and property damage. Estimate
the distance to the traffic behind by looking
over your shoulder.
112
Online Edition for Part no. 01405B45E30 - VI/24
English 
