Things to remember when driving
DRIVING TIPS
Safety information
Pedal feel when driving off
After turning on drive-ready state from idle
state, the pedal may feel unusual, e.g., the
pedal travel path may feel short or long. After
the brake pedal has been fully released, the
pedal will feel as usual again.
NOTICE
When driving too quickly through deep wa-
ter, the water can penetrate under the hood,
into the electrical system or into the trans-
mission. There is a risk of property damage.
When driving through water, do not exceed
the maximum indicated water level and the
maximum speed for driving through water.
Driving in wet conditions
In case of wet roads, exposure to road salt or
in heavy rain, gently depress the brake pedal
every few kilometers. Ensure that this action
does not endanger other road users.
Braking safely
The heat generated while braking dries brake
disks and brake pads and protects them
against corrosion.
General information
In this way the brake power will be available
when you need it.
The vehicle is equipped with an Antilock Brak-
ing System as a standard feature.
Perform full braking when appropriate. To ach-
ieve the best possible braking assistance, do
not reduce the pressure on the brake pedal
during full braking. Steering is still responsive.
You can still avoid any obstacles with a mini-
mum of steering movement.
Hills
General information
The braking effect of the drivetrain can be in-
fluenced through the energy recovery process.
Sounds from the hydraulic circuits indicate that
the Antilock Braking System is regulating.
Safety information
Objects in the travel path of the pedals
Warning
Light but constant pressure on the brake
pedal can lead to high temperatures, brake
wear, and even failure of the brake system.
There is a risk of accident, injury, and prop-
erty damage. Avoid placing excessive stress
on the brake system.
Warning
Objects in the driver's footwell can limit the
pedal travel or block a depressed pedal.
There is a risk of accident, injury, and prop-
erty damage. Stow objects in the vehicle such
that they are secured and cannot enter into
the driver's footwell. Use floor mats that are
suitable for the vehicle and can be safely at-
tached to the floor. Do not use loose floor
mats and do not layer several floor mats.
Make sure that there is sufficient clearance
for the pedals. Ensure that the floor mats
are securely fastened again after they were
removed, for instance for cleaning.
Warning
In Neutral or with drive-ready state switched
off, safety functions, for instance engine brak-
ing effect, braking assistance and steering
assistance, may be restricted or not availa-
ble. There is a risk of accident, injury, and
278
Online Edition for Part no. 01405B45E30 - VI/24