Get Vehicle care -> Washing the vehicle Guide for BMW I4 4 Door First Generation (2021-2025)

Vehicle care

MOBILITY

Vehicle care

Vehicle features and options

NOTICE

When washing with an open charging socket

flap, the charging socket can be damaged.

There is a risk of damage to property. Close

the charging socket flap before washing.

Clean dirt behind the charging socket flap

with a cloth.

This chapter describes model-specific equip-

ment, systems, and functions that are currently

available, or may become available in the fu-

ture, even if they are not present in the vehicle.

Additional information:

Vehicle equipment, refer to page 8.

Steam-jet cleaner and high

pressure cleaner

Washing the vehicle

General information

Regularly remove foreign objects such as

leaves or snow in the area below the wind-

shield.

Safety information

NOTICE

When using high-pressure cleaners, compo-

nents can be damaged due to the pressure

or high temperatures or because an insuffi-

cient distance was maintained. There is a risk

of property damage. Maintain sufficient dis-

tance and do not spray too long continuously.

Follow the operating instructions for the high

pressure cleaners.

Wash the vehicle frequently, particularly in win-

ter. Intense contamination and road salt can

damage the vehicle.

Additional information:

Fold-out position of the wipers, refer to

page 167.

Safety information

Distances and temperature

Warning

▷

Maximum temperature: 140 ℉/60 ℃.

Contact with live components can lead to an

electric shock. High voltage is present at the

charging connection. There is a risk of injury

or danger to life.

▷

Minimum distance from sensors, cameras,

seals and lights: 12 inches/30 cm.

▷

Minimum distance from glass sunroof:

31.5 in/80 cm.

It is recommended that work on the charg-

ing connection, for example cleaning, is per-

formed by an authorized service center or an-

other qualified service center or repair shop.

349

Online Edition for Part no. 01405B45E30 - VI/24

Vehicle care

MOBILITY

Driving into a car wash

Automatic car washes or car

washes

NOTICE

Safety information

Selector lever position P is automatically en-

gaged when standby state is switched off.

The wheels are blocked. There is a risk of

property damage. Do not switch off standby

if the vehicle is meant to coast, e.g., in a car

wash.

NOTICE

Using a car wash with high pressure washers

may result in water penetration of window

areas. There is a risk of property damage.

Do not drive into high-pressure car wash sys-

tems.

In a car wash, the vehicle must be able to roll

freely.

Some car washes do not permit persons in the

vehicle. The vehicle cannot be locked from the

outside when in selector lever position N. A

signal sounds when an attempt is made to lock

the vehicle.

NOTICE

Improper use of automatic car washes can

cause damage to the vehicle. There is a risk

of property damage. Follow the following in-

structions:

Additional information:

Rolling or pushing the vehicle, refer to

page 126.

▷

Give preference to cloth car washes or

those that use soft brushes in order to

avoid paint damage.

Driving out of a car wash

Ensure that the vehicle key is in the car.

Turn on drive-ready state.

▷

Note the permissible vehicle dimensions

for the car wash.

Do not drive through a car wash with

guide rails higher than 4 in/10 cm to

avoid damage to the body.

Additional information:

Drive-ready state, refer to page 47.

▷

Observe the tire width of the guide rail to

avoid damage to tires and rims.

Lights

Fold in exterior mirrors to avoid damage

to the exterior mirrors.

Do not rub wet lights dry and do not use

abrasive or acidic cleaning agents or cleaning

agents containing alcohol.

Deactivate the wiper and, if necessary,

rain sensor to avoid damage to the win-

dow wiper system.

Soak areas that have been dirtied, for instance

from insects, with auto shampoo and wash off

with water.

▷

Take off all removable attachments, e.g.,

antennas.

Thaw ice with de-icing spray; do not use an ice

scraper.

After washing the vehicle

After washing the vehicle, apply the brakes

briefly to dry them. Otherwise, their braking

effect may be reduced. The heat generated

350

Online Edition for Part no. 01405B45E30 - VI/24

Vehicle care

MOBILITY

while braking dries brake disks and brake pads

and protects them against corrosion.

prevent the finish from being altered or discol-

ored.

Completely remove all residues on the win-

dows to minimize loss of visibility due to

smearing and to reduce wiper noises and

wiper blade wear.

Matte paintwork

Only use cleaning and care products suitable

for vehicles with matte paintwork.

Plastic wrap

Use only cleaning and care products that are

suitable for vehicles with a plastic wrap.

Vehicle care

Vehicle care products

Leather care

Remove dust from the leather regularly, using

a cloth or vacuum cleaner.

General information

BMW recommends using vehicle care and

cleaning agents from BMW. Suitable vehicle

care products are available from an authorized

service center or another qualified service cen-

ter or repair shop.

Otherwise, particles of dust and road grime

chafe in pores and folds, and lead to heavy

abrasion and premature degradation of the

leather surface.

To guard against discoloration such as from

clothing, clean leather and provide leather care

roughly every two months.

Safety information

Warning

Clean light-colored leather more frequently be-

cause contamination on such surfaces is sub-

stantially more visible.

Cleaning agents can contain substances that

are dangerous and harmful to your health.

There is a risk of injury and risk of property

damage. When cleaning the interior, open the

doors or windows. Only use cleaning agents

that are intended for cleaning the respective

component. Follow the instructions on the

packaging.

Use leather care products; otherwise, dirt and

grease will gradually break down the protective

coating of the leather surface.

Remove aggressive substances, e.g.,

sunscreen, immediately to prevent alterations

or discolorations of the leather.

Synthetic leather care

Clean synthetic leather regularly with a damp

microfiber cloth or vacuum cleaner.

Vehicle paintwork

General information

Otherwise, dust and road grime particles will

rub into pores and folds, causing significant

abrasion and premature degradation of the

surface.

Regular vehicle care contributes to driving

safety and value retention. Environmental in-

fluences in areas with elevated air pollution

or natural contaminants such as tree resin or

pollen can affect the vehicle paintwork. Tailor

the frequency and extent of the vehicle care to

these influences.

In case of major soiling, use a moist soft

sponge or microfiber cloth with suitable interior

cleaners.

Corrosive substances such as grease or bird

droppings must be removed immediately to

351

Online Edition for Part no. 01405B45E30 - VI/24

Vehicle care -> Washing the vehicle for Your BMW I4 4 Door First Generation (2021-2025)

Related Topics

Popular Owner Manuals

Latest Owner Manuals