MOBILITY -> Coolant for Your BMW M2 2 Door First Generation (2016-2021)

Coolant  
MOBILITY  
Coolant  
Vehicle features and  
options  
WARNING  
Additives are harmful and incorrect additives  
can damage the engine. There is a risk of injury  
and risk of damage to property. Do not allow  
additives to come into contact with skin, eyes  
or articles of clothing. Use suitable additives  
only.  
This chapter describes all standard, country-spe‐  
cific and optional features offered with the series.  
It also describes features that are not necessarily  
available in your vehicle, e. g., due to the selected  
options or country versions. This also applies to  
safety-related functions and systems. When us‐  
ing these functions and systems, the applicable  
laws and regulations must be observed.  
Coolant level  
Checking  
1. Let the engine cool.  
General information  
The vehicle has two coolant reservoirs that are  
located in the engine compartment.  
2. Open the hood.  
3. Turn the lid of the coolant reservoir slightly  
counterclockwise to allow any excess pres‐  
sure to dissipate, then open it.  
To ensure the operational reliability of the vehi‐  
cle, always check the coolant level of both cool‐  
ant reservoirs.  
Not all commercially available additives are suita‐  
ble for the vehicle. Information about suitable ad‐  
ditives is available from a dealer’s service center  
or another qualified service center or repair shop.  
Safety information  
WARNING  
With the engine hot and the cooling system  
open, coolant can escape and lead to scalding.  
There is a risk of injury. Only open the cooling  
system with the engine cooled down.  
234  
Online Edition for Part no. 01402629978 - VI/18  
Coolant  
MOBILITY  
4. Open the coolant reservoir lid.  
5. The coolant level is correct if it lies between  
the minimum and maximum marks in the filler  
neck.  
Adding  
1. Let the engine cool.  
2. Turn the lid of the coolant reservoir slightly  
counterclockwise to allow any excess pres‐  
sure to dissipate, then open it.  
3. If the coolant is low, slowly add coolant up to  
the specified level; do not overfill.  
4. Close the cap.  
5. Have the cause of the coolant loss eliminated  
as soon as possible.  
Disposal  
Comply with the relevant environmental  
protection regulations when disposing of  
coolant and coolant additives.  
235  
Online Edition for Part no. 01402629978 - VI/18