CONTROLS -> Sensors of the vehicle for Your BMW M2 2 Door Second Generation (2022-2025)

Sensors of the vehicle  
CONTROLS  
Sensors of the vehicle  
Rearview camera  
Vehicle features and options  
This chapter describes model-specific equip-  
ment, systems, and functions that are currently  
available, or may become available in the fu-  
ture, even if they are not present in the vehicle.  
Additional information:  
Vehicle equipment, refer to page 8.  
Overview  
The rearview camera is located in the handle  
strip on the rear of the vehicle.  
Depending on the equipment, the following  
cameras and sensors are installed in the vehi-  
cle:  
Functional requirement of the  
cameras  
The areas of the cameras are clean and clear.  
Camera behind the windshield.  
Rearview camera.  
Additional information:  
Front radar sensor.  
Washing the vehicle, refer to page 314.  
Vehicle care, refer to page 315.  
Radar sensors, side, rear.  
Ultrasonic sensors in the front/rear bump-  
ers.  
System limits of the cameras  
The cameras may not work properly, e.g.,  
show something that is incorrect, in the follow-  
ing situations:  
Ultrasonic sensors, side.  
Cameras  
In heavy fog, wet conditions, or snowfall.  
On steep hills, in steep depressions or in  
tight curves.  
Camera behind the windshield  
When the camera field of view is covered,  
for instance by a fogged up windshield or  
labels.  
If the camera lens is dirty or damaged.  
With open doors or open cargo area.  
When driving toward bright lights or strong  
reflections, e.g., setting sun.  
When it is dark outside.  
The camera behind the windshield is located  
near the interior mirror.  
37  
Online Edition for Part no. 01405B47790 - VI/24  
Sensors of the vehicle  
CONTROLS  
The camera has overheated due to exces-  
sive temperatures and temporarily turned  
off.  
Radar sensors, side, rear  
During calibration of the camera immedi-  
ately after vehicle delivery.  
If applicable, a Check Control message will be  
displayed when the system limits are reached.  
Radar sensors  
Safety information  
Warning  
The radar sensors are located on the side of  
the rear bumper.  
Functional requirement of the radar  
sensors  
The areas of the radar sensors are clean and  
clear.  
The vehicle radar sensors and thus also the  
driver assistance systems can be impaired by  
external influences, e.g., interference. There  
is a risk of accident, injury, or property dam-  
age. Watch the surrounding traffic situation  
closely, be ready to take over steering and  
braking at any time, and actively intervene  
where appropriate.  
Additional information:  
Washing the vehicle, refer to page 314.  
Vehicle care, refer to page 315.  
System limits of the radar sensors  
The function of the radar sensors may be re-  
stricted or not available, for instance in the fol-  
lowing situations:  
Front radar sensor  
In case of dirty sensors.  
In case of iced-up sensors.  
If sensors are covered such as by labels,  
films or a license-plate carrier.  
If the sensor is not aligned correctly, for in-  
stance due to parking damage.  
If the radiation range of the sensors is cov-  
ered, e.g., by protruding cargo.  
The front radar sensor is located in the front  
bumper.  
When the field of view of the sensors is cov-  
ered, e.g., by garage walls, hedges, snow  
hills, vehicles or trailers.  
After improper paint work on the vehicle in  
the area of the sensors.  
On steep hilltops or in sharp dips in the  
road.  
38  
Online Edition for Part no. 01405B47790 - VI/24  
Sensors of the vehicle  
CONTROLS  
If applicable, a Check Control message will be  
displayed when the system limits are reached.  
Ultrasonic sensors, side  
Ultrasonic sensors  
Ultrasonic sensors, front  
The ultrasonic sensors for the parking assis-  
tance systems are located on the sides of the  
front and rear bumpers.  
Functional requirement of the  
ultrasonic sensors  
The areas of the ultrasonic sensors are clean  
and clear.  
The ultrasonic sensors of the parking assis-  
tance systems are located in the front bumper.  
Additional information:  
Ultrasonic sensors, rear  
Washing the vehicle, refer to page 314.  
Vehicle care, refer to page 315.  
System limits of the ultrasonic  
sensors  
The detection of objects with ultrasonic meas-  
urements can run into physical limits, e.g., in  
the following situations:  
If the sensors are dirty or covered, e.g., by  
stickers.  
The ultrasonic sensors of the parking assis-  
tance systems are located in the rear bumper.  
If the sensor is not aligned correctly, for in-  
stance due to parking damage.  
After improper paint work on the vehicle in  
the area of the sensors.  
For small children and animals.  
For persons with certain clothing, for in-  
stance jacket.  
With obstacles and persons at the edge of  
the lane.  
In case of external interference with the  
ultrasonics, for instance from passing ve-  
39  
Online Edition for Part no. 01405B47790 - VI/24  
Sensors of the vehicle  
CONTROLS  
hicles, loud machines or other ultrasonic  
sources.  
Under certain weather conditions, e.g., high  
moisture, wet conditions, snowfall, cold, ex-  
treme heat, or strong wind.  
With tow bars and trailer hitches of other  
vehicles.  
With thin or wedge-shaped objects.  
With moving objects.  
With elevated, protruding objects such as  
ledges.  
With objects with corners, edges, and  
smooth surfaces.  
In the case of objects with fine surfaces or  
structures, e.g., wire mesh fences.  
For objects with porous surfaces.  
With small and low objects, for instance  
boxes.  
Low objects already displayed, for instance  
curbs, can be outside of the detection  
ranges of the sensors.  
With soft obstacles or obstacles covered in  
foam material.  
With plants and bushes.  
In automatic car washes.  
In the event of uneven floors, e.g. speed  
bumps.  
If there are large amounts of exhaust gas.  
Cargo that extends beyond the perimeter of  
the vehicle is not taken into account by the  
ultrasonic sensors.  
If applicable, a Check Control message will be  
displayed when the system limits are reached.  
40  
Online Edition for Part no. 01405B47790 - VI/24