Get QUICK REFERENCE -> On the road Guide for BMW M2 2 Door Second Generation (2022-2025)

On the road

QUICK REFERENCE

On the road

Manual transmission:

By pressing the clutch pedal.

M Steptronic Sport transmission:

Driving

▷

Drive-ready state

▷

By releasing the brake pedal.

Turning on the drive-ready state

1. Depress the brake pedal.

When Automatic Hold is activated: step on

the accelerator pedal.

2. Manual transmission: step on the clutch

pedal and shift to Neutral.

Manual transmission

3. Press the Start/Stop button.

Shifting

When shifting to a lower gear, excessive RPM

can damage the engine. There is a risk of

property damage. When shifting into 5th or 6th

gear, press the gearshift lever to the right.

Turning off drive-ready state

Manual transmission:

1. When the vehicle is stationary, apply the

parking brake.

Reverse gear

Select only when the vehicle is stationary.

2. Press the Start/Stop button.

The engine is switched off.

To overcome the resistance push the gearshift

lever dynamically to the left and engage re-

verse gear with a forward shifting movement.

The vehicle switches into standby state.

3. Shift into first gear or reverse gear.

M Steptronic Sport transmission:

M Steptronic Sport transmission

1. While the vehicle is stationary, depress the

brake and engage selector lever position P.

Engaging selector lever position D/S,

N, R

2. Set the parking brake.

3. Press the Start/Stop button.

The READY indicator goes out and a signal

tone sounds.

The drive-ready state is switched off automat-

ically if the driver's seat belt is not buckled

when the driver's door is opened.

Auto Start/Stop function

The Auto Start/Stop function helps to conserve

fuel. The system switches off the engine during

a stop, for instance in traffic jam or at traffic

lights. Drive-ready state remains switched on.

The engine starts automatically under the fol-

lowing preconditions:

▷

R reverse gear.

N neutral.

Center position, forward position.

- Downshifting, manual.

24

Online Edition for Part no. 01405B47790 - VI/24

On the road

QUICK REFERENCE

▷

+ Upshifting, manual.

Parking

D/S Drive mode or sequential mode.

Make sure the parking brake is engaged.

To prevent the vehicle from creeping after you

select a gear position or reverse gear, main-

tain pressure on the brake pedal until you are

ready to drive off.

Light and view

Turn signal, high-beam headlights,

headlight flasher

Engage selector lever position R only when the

vehicle is stationary.

Turn signal

Engaging selector lever position P

Engage selector lever position P only when the

vehicle is stationary.

▷

Flashing: press the lever past the resist-

ance point.

One-touch signaling: lightly tap the lever up

or down.

Press button P.

Brief flashing: press the lever to the resist-

ance point and hold it there for as long as

you want the turn signal to flashing.

Parking brake

Setting the parking brake

Pull the switch.

High-beam headlights,

headlight flasher

The LED on the switch and the indica-

tor light in the instrument cluster are

illuminated.

Releasing the parking brake

With drive-ready state switched on:

Manual transmission: press the switch

while the brake pedal is depressed.

M Steptronic Sport transmission: press the

switch while pressing the brake or engaging

selector lever position P.

Press the lever forward or pull it backward.

▷

High-beam headlights on, arrow 1.

The LED and the indicator light go out.

The parking brake is released.

25

Online Edition for Part no. 01405B47790 - VI/24

On the road

QUICK REFERENCE

The high-beam headlights illuminate when

the low-beam headlights are switched on.

Window wiper system

▷

High-beam headlights off/headlight flasher,

arrow 2.

Turning on window wiper system

Lights and lighting

Buttons in the vehicle

Icon

Function

Exterior lighting off.

Daytime driving lights.

Press the lever up until the desired position is

reached.

Parking lights.

▷

Rest position of the wipers, position 0.

Rain sensor mode, position 1.

Normal wiper speed, position 2.

Fast wiper speed, position 3.

Automatic headlight control.

Adaptive lighting functions.

Low-beam headlights.

Turning off the window wiper system

and flick wipe

Instrument lighting.

Right roadside parking light.

Left roadside parking light.

Press the lever down.

▷

Turning off: press the lever down until it

reaches the 0 position.

▷

Flick wipe: press the lever down from the 0

position.

The lever automatically returns to its 0 po-

sition when released.

26

Online Edition for Part no. 01405B47790 - VI/24

On the road

QUICK REFERENCE

Activating/deactivating rain sensor

Climate control

Climate control functions

Functions in the Climate menu

Icon

Function

Turn the climate control sys-

tem on/off.

Enable: press lever up once from the 0 posi-

tion, arrow 1.

Automatic program.

Temperature.

Disable: press lever back into the 0 position.

Adjusting the rain sensor sensitivity

Air conditioning.

Maximum cooling.

Air recirculation mode.

Turn the knurled wheel on the wiper lever.

Automatic recirculated-air con-

trol.

Cleaning the windshield

Fresh air.

Air flow.

Air distribution.

SYNC program.

Seat heating.

Pull the lever.

27

Online Edition for Part no. 01405B47790 - VI/24

On the road

QUICK REFERENCE

Buttons, automatic climate control

Intermediate stop

Refueling

Fuel filler cap

1. To open the fuel filler flap, press on the rear

edge, arrow. The fuel filler flap opens.

Icon

Function

Defrost function.

Rear window defroster.

2. Open the fuel filler cap counterclockwise.

Buttons, rear automatic climate control

3. Place the fuel filler cap in the bracket on the

fuel filler flap.

Icon

Function

Automatic program.

Temperature.

Air distribution.

Switching off.

28

Online Edition for Part no. 01405B47790 - VI/24

On the road

QUICK REFERENCE

Adding engine oil

1. Opening the hood.

Wheels and tires

Tire pressure specifications

2. Open the lid counterclockwise.

The tire inflation pressure specifications can be

found in the tire inflation pressure table in the

printed Owner's Manual.

After correcting the tire pressure

If equipped with a Tire Pressure Monitor, the

corrected tire pressures are applied automati-

cally. Make sure that the correct tire settings

have been made. With tires that cannot be

found in the tire pressure values on the control

display, reset the Tire Pressure Monitor (TPM).

3. Add engine oil.

4. Close the lid.

If equipped with a flat tire monitor, reinitialize

the flat tire monitor.

Providing assistance

Checking the tire pressure

Regularly check the tire inflation pressure and

correct it as needed:

Hazard warning system

▷

At least twice a month.

Before embarking on an extended trip.

Electronic oil measurement

Functional requirements

A current measured value is available after ap-

prox. 30 minutes of normal driving with the

combustion engine running.

Hazard warning system button

Displaying the engine oil level

1.

Apps menu

ConnectedDrive

2. "Vehicle"

3. "Vehicle status"

4. "Engine oil level"

The engine oil level is displayed.

BMW Assistance

Contact BMW Assistance for information and

support for all aspects of the vehicle.

1.

Apps menu

Adding engine oil

2. "All apps"

General information

3. "BMW Assist"

Safely park the vehicle and switch off drive-

ready state before adding engine oil.

4. If necessary, select the desired service.

29

Online Edition for Part no. 01405B47790 - VI/24

On the road

QUICK REFERENCE

A voice connection to the selected service is

established.

BMW Teleservices

Teleservices are services that help to maintain

vehicle mobility.

Teleservices can comprise the following serv-

ices:

▷

BMW Roadside Assistance.

BMW Accident Assistance.

Teleservice Call.

An authorized service center.

30

Online Edition for Part no. 01405B47790 - VI/24

On the road

QUICK REFERENCE

31

Online Edition for Part no. 01405B47790 - VI/24

QUICK REFERENCE -> On the road for Your BMW M2 2 Door Second Generation (2022-2025)

Related Topics

QUICK REFERENCE

Popular Owner Manuals

Latest Owner Manuals