2000-2006 BMW M3 4 Door Owner service procedures -> Replacement procedures User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Owner service procedures -> Replacement procedures for Your BMW M3 4 Door Third Generation (2000-2006)

shield wiper blades  
h off the engine  
the wiper arm completely out  
the windshield  
on the wiper blade at an angle  
pull the release spring – see  
w
the wiper blade down and  
ok it toward the windshield  
he wiper blade past the wiper  
oward the top  
t a new wiper blade and apply  
ure until you hear it engage.  
 
133  
Because of the extremely high  
beams and high beams  
voltages involved, any work on the  
xenon lighting system, including bulb-  
changing, should be carried out by  
technically-qualified personnel only.  
Otherwise, there is a risk of fatal  
injury.<  
w beams: H7 bulb, 55 watts.  
h beams: H7 bulb, 55 watts.  
The H7 bulb is pressurized. There-  
ore, wear safety glasses and pro-  
e gloves. Failure to comply with  
recaution could lead to injury if the  
s damaged.<  
e contact a BMW center in case of  
unction.  
cleaning the headlamps, please  
the instructions in the Caring for  
ehicle brochure.  
ng lamps  
t bulb  
e contact a BMW center in case of  
unction.  
n lamps*  
ervice life of these bulbs is very  
and the probability of a failure is  
ow, provided that they are not  
hed on and off an unusual number  
es. If one of these bulbs should  
theless fail, it is possible to con-  
driving with great caution using  
g lamps, provided traffic laws in  
area do not prohibit this.  
 
t the 2 pins on the lamp into the Side turn signal indicators  
s on the vehicle  
5 watt bulb  
in the lamp and screw the bulb  
1. Use finger pressure against the rear  
ce through the upper opening.  
end of the lamp – see arrow – to  
press it forward for removal  
2. Apply gentle pressure to the bulb  
while turning it to the left to remove.  
 
135  
in the luggage compartment lid  
ng a screwdriver, loosen the clip  
2. Fold the trim panel down – see arrow  
1. Disengage the bulb holder – see  
arrow 2 – and remove it  
3. Applying light pressure, turn the bulb  
to the left. Remove and exchange the  
bulb  
4. Press the bulb holder into position  
until you hear it engage  
5. Reinstall the trim with the clip.  
 

Related Topics

Popular Owner Manuals