Get Entertainment Guide for BMW M3 4 Door Fourth Generation (2007-2013)

Entertainment

Operation of the radio, CD equipment and

external audio devices as well as their tone

settings are described in this chapter.

On/off and settings

The following audio sources have shared con-

trols and setting options:

Operation via iDrive

iDrive, for operating principle refer to page 16.

>

Radio

1. Press the

button.

CD player

CD changer*

This opens the start menu.

2. Move the controller backwards to call up

"Entertainment".

Controls

The audio sources can be operated using:

>

Buttons near the CD player

iDrive

Buttons on the steering wheel, refer to

page 11

>

Programmable memory keys, refer to

page 21

You have the following choices:

>

"FM" and "AM": radio reception

"SAT": satellite radio*

Buttons on the CD player

"CD": CD player or changer*

"AUX": AUX-In port, USB-audio interface*

"Set": depending on the audio source,

other adjustments can be made, e.g. with

the radio: update station with strongest

reception, store station, tone control, sam-

ple stations.

From another menu, you can switch

1

Sound output for entertainment on/off, vol-

ume

directly to the screen last displayed, refer

to Convenient call-up of menu items on

page 18.<

> Press: switch on/off.

When you switch on the unit, the last set

radio station or track is played.

With the ignition at radio readiness or beyond,

the selected audio source is stored for the

remote control currently in use.

> Turn: adjust volume.

Drive for audio CDs

Eject CD.

2

3

4

Switching on/off

In order to switch the entertainment sound out-

put on and off:

Station scan/track search

> Change radio station.

> Select track for CD player and CD

Press button 1 on the CD player.

changer.

This symbol on the Control Display indi-

cates that sound output is switched off.

5

Drive for navigation DVD

162

Treble and bass

Adjusting volume

Turn knob 1 on the CD player until the desired

1. Select "Treble / Bass" and press the con-

troller.

volume is obtained.

You can also adjust the volume with buttons on

the steering wheel, refer to page 11.

With the ignition at radio readiness or beyond,

the setting is stored for the remote control cur-

rently in use.

Tone control

You can alter various tone settings, e.g. treble

and bass or the speed-dependent volume

increase.

2. Move the controller to the left or right to

select "Treble" or "Bass".

The tone settings are applied to all audio

sources.

With the ignition at radio readiness or beyond,

the settings are stored for the remote control

currently in use.

Changing tone settings

1. Press the

button.

This opens the start menu.

3. Turn the controller until the desired setting

is selected.

2. Press the controller to open the menu.

3. Turn the controller until "Settings" is

selected and press the controller.

Balance and fader

4. Select "Audio" and press the controller.

You can adjust the volume distribution in the

same manner as "Treble / Bass".

>

"Balance": left/right volume distribution

"Fader": front/rear volume distribution

Speed-dependent volume control

The speed-dependent volume control auto-

matically increases the volume with increasing

driving speed. You can set various stages for

the increase in volume.

The tone settings can also be selected if you

have called up "Entertainment" in the start

menu:

Select "Set" and then "Tone", pressing the

controller after each selection.

163

1. Select "Speed volume" and press the con-

troller.

2. Select "Concert hall" or "Theater".

3. Press the controller.

2. Turn the controller:

The adjustment is applied; the field can be

changed.

LOGIC7 spatial sound is switched on.

To switch off the spatial sound effect:

Select "Off" and press the controller.

LOGIC7 and the LOGIC7 logo are registered

trade marks of Lexicon, Inc., a company of the

Harman International Group.

Individual High-End Audio System*

You can choose between stereo and multichan-

nel playback, surround.

1. Select "Surround Settings" and press the

controller.

Professional LOGIC7 HiFi System*

2. Select "Stereo" or "Surround".

You can select a spatial sound effect that

improves the spatial acoustics in all frequency

ranges.

1. Select "Surround Settings" and press the

controller.

Equalizer*

You can set individual sound frequency ranges.

164

1. Select "Equalizer" and press the controller.

until "Reset" is selected and press the con-

troller.

2. Move the controller to the left or right to

select the desired frequency range.

6. In vehicles equipped with two drives:

Select "Yes" and press the controller.

3. Turn the controller until the desired setting

is selected.

Resetting tone settings

You can reset all tone settings to the default

setting.

1. Open the start menu.

2. Press the controller to open the menu.

3. Turn the controller until "Settings" is

selected and press the controller.

4. Select "Audio" and press the controller.

5. If necessary, move the highlight marker to

the uppermost field. Turn the controller

165

Radio

Your radio provides reception of the FM and AM

wavebands.

Changing stations

Listening to the radio

Turn the controller.

Buttons on the CD player

Press the button for the corre-

sponding direction.

The system switches to the next displayed sta-

tion.

You can also change the station with the but-

tons on the steering wheel, refer to page 11.

Press the button if the sound output is switched

off.

iDrive, for operating principle refer to page 16.

1. Press the

button.

This opens the start menu.

Changing selection criteria

2. Move the controller backwards to call up

"Entertainment".

In addition to the stations currently displayed,

you can have stations with another selection

criterion displayed.

3. If necessary, move the highlight marker to

the uppermost field. Select "FM" or "AM".

You can choose from the following selection

criteria:

>

"All stations"*:

Stations that can currently be received on

the "FM" waveband.

>

"Autostore":

Stations with the best reception on the

"AM" waveband.

For High Definition Radio: stations with the

best reception on the "FM" waveband.

4. Press the controller.

>

"Presets":

Stations are shown on the Control Display on

the basis of various selection criteria, e.g. "Pre-

sets".

Stations you have previously stored, refer to

page 168.

"Manual":

If "Autostore" does not show a station in the AM

waveband or if the displayed stations are no

longer receivable, update the stations with the

best reception, refer to page 167.

To set stations that can be received in addi-

tion to those already being displayed, refer

to Selecting the frequency manually,

page 167.

166

To change the selection criterion:

To stop scanning, press the button again.

1. Move the highlight marker to the second

field from the top.

Selecting the frequency manually

With "Manual" you can select stations that can

be received in addition to those displayed.

2. Choose a selection criterion and press the

controller.

1. Select "FM" or "AM" and press the control-

ler.

2. Move the highlight marker to the second

field from the top.

3. Select "Manual" and press the controller.

Sampling stations, Scan

The stations on the current waveband are auto-

matically sampled in succession.

1. Select "FM" or "AM" and press the control-

ler.

4. Turn the controller to set a certain fre-

quency.

"Set" is selected.

2. Press the controller.

Other menu items are displayed.

Updating stations with best reception

3. Select "Scan" and press the controller.

If on a longer journey you move out of the

reception range of the stations originally

received, you can update the list of stations

received with the strongest signals in the AM

waveband.

1. Select "AM" and press the controller.

2. Move the highlight marker to the second

field from the top.

3. Select "Autostore" and press the controller.

"Set" is selected.

The stations are sampled.

Stop sampling:

1. Press the controller.

2. Select "Scan" and press the controller.

Station sampling is interrupted and the

selected station stays on.

Buttons on the CD player

To sample stations, press the but-

ton for the corresponding direction for an

extended time.

4. Press the controller.

Other menu items are displayed.

167

5. Select "Autostore" and press the controller.

5. Select "Store" and press the controller.

The display of the stations with the strongest

reception is updated. The frequencies of the

stations are displayed.

"Presets" is displayed.

6. Turn the controller until the desired mem-

ory location is selected.

7. Press the controller.

The station is stored.

Storing stations

Via iDrive

1. Select "FM" or "AM" and press the control-

ler.

2. Move the highlight marker to the second

field from the top. Turn the controller until

the desired selection criterion is chosen

and press the controller.

3. Select the desired frequency or station.

"Set" is selected.

The channels of the last selection criterion are

displayed once again after a short time.

With the ignition at radio readiness or beyond,

the stations are stored for the remote control

currently in use.

Via programmable memory keys

You can store a station on the programmable

memory keys, refer also to page 21.

1. Select a station.

2.

...

Press the desired key for a

4. Press the controller.

longer period.

Other menu items are displayed.

Changing a memory position

1. Select "Presets" and press the controller.

2. Select the desired station.

"Set" is selected.

3. Press the controller.

Other menu items are displayed.

168

4. Select "Store" and press the controller.

The setting is stored for the remote control cur-

rently in use.

High Definition Radio*

Many stations transmit analog and digital sig-

nals. You can receive these stations digitally for

improved sound quality.

A digital radio network must be available to be

able to receive digital stations.

5. Turn the controller until the desired mem-

ory location is selected.

Switching digital radio reception on/off

The number of the memory location

appears beside the name or frequency of

the station.

iDrive, for operating principle refer to page 16.

1. Press the

button.

This opens the start menu.

6. Press the controller.

The station is stored.

2. Press the controller to open the menu.

3. Turn the controller until "Settings" is

selected and press the controller.

4. Select "Audio" and press the controller.

Radio Data System RDS

5. Move the highlight marker to the uppermost

field. Turn the controller until "HD radio" is

selected and press the controller.

On the FM waveband, additional information is

broadcast via RDS. If the reception conditions

are good, the station names are shown on the

Control Display. Where reception is poor or in

the event of interference, it may take some time

before the station names will appear in the dis-

play.

Switching RDS on/off*

1. Select "FM" and press the controller.

"Set" is selected.

2. Press the controller.

Other menu items are displayed.

6. Select "Off" and press the controller.

Digital station reception is now switched on.

3. Select "RDS" and press the controller.

This symbol is displayed when a station is

received digitally.

RDS is activated.

169

Some stations do not transmit the digital and

analog signals simultaneously. If you are in an

area in which digital reception of the selected

station is not possible continuously, reception

will alternate between analog and digital. This

can cause repetitions or interruptions. In this

case it may be preferable to switch off digital

reception.

1. Select "FM" or "AM" and press the control-

ler.

Selecting the programs of a digital

station*

Some stations broadcast several programs on a

single frequency. To select one of these pro-

grams:

2. Move the highlight marker to the second

field from the top.

3. Select "Autostore" and press the controller.

1. Select "FM" or "AM" and press the control-

ler.

4. Press the controller.

Other menu items are displayed.

2. Select "Manual" and press the controller.

5. Select "Autostore

troller.

" and press the con-

3. Select a station that can be received digi-

tally.

This symbol is displayed when a station

is received digitally.

4.

Change to the next program of

the digital station using the buttons on the

radio or steering wheel.

You can store a station, refer to page 168.

Updating digitally receivable stations

If on a longer journey you move out of the

reception range of the stations originally

received, you can update the list of stations

received with the strongest signals.

The display of the digitally receivable stations is

updated. This can take up to 2 minutes.

Displaying additional information

With digital stations, additional information on

the current track can be displayed, e.g. the

name of the artist.

170

1. Select the station and press the controller.

2. Select "Details" and press the controller.

The information is displayed.

When you change to another digitally received

station, any additional information is displayed

after a brief interruption.

171

*

Satellite radio

You can receive over 100 different channels

with high sound quality.

Enabling

1. Select a channel that has not yet been

enabled and press the controller.

The channels are offered to you in predefined

packages. To receive the channels of your

choice, you must have the corresponding pack-

ages enabled.

A telephone number and the electronic

serial number, ESN, are displayed.

The electronic serial number is

With this new technology, signal losses

can occur from time to time and result in

audio interruptions.<

required for enabling or disabling.<

2. To enable the channel:

Dial the phone number.

Disabling

Enabling or disabling

channels

1. Select an enabled channel and press the

controller.

iDrive, for operating principle refer to page 16.

1. Press the

button.

This opens the start menu.

2. Move the controller backwards to call up

"Entertainment".

3. Select "SAT".

2. Select "ESN" and press the controller.

The electronic serial number, ESN, is dis-

played.

The electronic serial number is

required for disabling.<

3. To disable the channel:

Dial the phone number.

4. Press the controller.

The channels are displayed.

These channels are enabled.

172

4. If "Categories" has been selected:

Select the desired category and press the

controller.

Selecting and storing a

channel

1. Select "SAT" and press the controller.

The channels of this category are displayed.

Channels and categories are displayed on

the Control Display.

5.

Select a channel marked with this sym-

bol.

2. Select a menu item:

> "Presets":

Up to twelve channels you stored previ-

ously.

> "All channels":

All channels are displayed.

> "Categories":

All channels, sorted by category, e.g.

news, jazz.

6. Press the controller.

Other menu items are displayed.

7. Select "Details" and press the controller.

3. Press the controller.

Additional information

The name of the channel and additional infor-

mation on the current track are displayed, e.g.

the name of the artist.

173

Changing channels with buttons on CD

player

Press the button for the corre-

sponding direction.

The system switches to the next enabled chan-

nel.

Notes

When more than 4 seconds go by and no signal

is received, a message appears on the Control

Display.

1

2

Artist

Track

Under some circumstances, e.g. depend-

ing on environmental or topographic con-

ditions, it may not be possible to receive any

signal. The satellite radio cannot influence this.

A signal may not be available in tunnels or

underground garages, next to high-rise build-

ings, in the vicinity of trees, mountains or other

strong sources of radio interference.

Storing a channel

1. Select the desired channel.

2. Press the controller.

Other menu items are displayed.

3. Select "Store" and press the controller.

Reception usually resumes as soon as the sig-

nal becomes available again.<

"Presets" is displayed.

4. Turn the controller to select a memory loca-

tion and press the controller.

The channel is stored. The channels of the last

selection criterion are displayed again after a

short time.

174

*

CD player and CD changer

3. If necessary, move the highlight marker to

the uppermost field. Select "CD" and press

the controller.

Listening to CDs

Compressed audio files*

4. If necessary, move the highlight marker to

the second field from the top. On cars with a

CD changer, select "CD" and press the

controller to start the CD player.

CDs with compressed audio files, MP3s, can be

played by the CD player and CD changer.

Starting the CD player

The upper drive is for audio CDs.

Insert the CD into the drive with the labeled side

up.

The CD is pulled in automatically. Playback

starts automatically if the sound output is on.

When playing CDs with compressed audio files,

it can take the CD player approx. 1 minute to

read in the data, depending on the directory

structure.

To start playback when there is already a CD in

the drive:

Playback starts automatically if the sound out-

put is switched on.

iDrive, for operating principle refer to page 16.

Via programmable memory keys

1. Press the

button.

You can store the CD player function on the

programmable memory keys to start the CD

player, refer to page 21.

This opens the start menu.

2. Move the controller backwards to call up

"Entertainment".

Starting the CD changer

Fill and insert the CD magazine, refer to

page 179.

1. Press the

button.

This opens the start menu.

2. Move the controller backwards to call up

"Entertainment".

175

3. If necessary, move the highlight marker to

the uppermost field. Select "CD" and press

the controller.

Via iDrive

4. If necessary, move the highlight marker to

the second field from the top. Select the

desired CD and press the controller.

Turn the controller to select a track.

Compressed audio files*

1. Select a directory, if necessary, and press

the controller.

At the end of the last track, the next CD is

selected and played.

If new CDs have been placed in the CD maga-

zine, playback starts with the lowest CD, e.g.

CD 1, track 1.

The CD magazine's load status is indicated on

the Control Display.

Via programmable memory keys

You can store a CD compartment of the CD

changer on the programmable memory keys to

start the CD changer, refer to page 21.

2. Select a track and press the controller.

Selecting a track

Buttons on the CD player

Press the button for the appropriate

direction as often as necessary until the desired

track is reached.

The track is displayed on the Control Display.

You can also change the track with the buttons

on the steering wheel, refer to page 11.

To change the directory:

Select the directory and press the controller.

176

To exit from the menu:

2. Select "Scan" and press the controller.

Select the

arrow and press the controller.

If the car is equipped with two CD drives, you

can save specific tracks on the programmable

memory keys, refer to page 21.

Displaying information about the

track*

With compressed audio files, any information

about the current track that has been recorded

can be displayed, e.g. the name of the artist.

Stop sampling:

1. Press the controller.

2. Select "Details" and press the controller.

2. Select "Scan" and press the controller.

Track sampling is interrupted and the selected

track is played on.

Compressed audio files*

1. Select the current track and press the con-

troller.

2. Select the desired menu item:

> To sample all the tracks in the current

directory, select "Scan directory" and

press the controller.

The information is shown for the current track.

The setting is stored for the remote control cur-

rently in use.

> To sample all the tracks on the CD,

select "Scan all" and press the control-

ler.

Sampling tracks, Scan

All tracks on the current CD are automatically

sampled once in succession.

1. Select "Set" and press the controller.

Other menu items are displayed.

Stop sampling:

1. Press the controller.

2. Select "Scan directory" or "Scan all" and

press the controller.

Sampling is interrupted and the selected track

is retained.

177

Compressed audio files*

Repeating tracks

1. Select "Set" and press the controller.

Other menu items are displayed.

1. Select the current track and press the con-

troller.

2. Select the desired menu item:

> To repeat the selected track, select

"Repeat track" and press the controller.

> To repeat all the tracks in the current

directory, select "Repeat directory" and

press the controller.

2. Select "Repeat" and press the controller.

Stop repeating:

1. Press the controller.

2. Select "Repeat track" or "Repeat directory"

and press the controller.

The current track on the CD is repeated.

Stop repeating:

Random play sequence

The tracks on the current CD are played once

each in random order.

1. Press the controller again.

2. Select "Repeat" and press the controller.

1. Select "Set" and press the controller.

Other menu items are displayed.

2. Select "Random" and press the controller.

Stop random function:

1. Press the controller.

2. Select "Random" and press the controller.

178

Compressed audio files*

1. Select the current track and press the con-

troller.

2. Select the desired menu item:

> To play all the tracks in the current direc-

tory in random order, select "Random

directory" and press the controller.

> To play all the tracks on the CD in ran-

dom order, select "Random all" and

press the controller.

1. Push the cover to one side, arrow 1.

2. Press the button, arrow 2.

Stop random function:

1. Press the controller.

The CD magazine is ejected.

2. Select "Random directory" or "Random all"

and press the controller.

Inserting/removing CDs from the CD

magazine

Fast forward/reverse

Buttons on the CD player:

Press and hold the button for the

corresponding direction.

The tracks can be heard, but reproduction is

distorted.

When loading CDs into or removing them from

the CD magazine, hold them at their edges and

do not touch the reflective signal-sensing area.

CD magazine

Inserting CDs:

Insert the CD in its slot with the label side on

top.

Removing CDs:

Pull out the desired drawer, see arrow, and

remove the CD.

The BMW CD changer for six CDs is behind the

left side panel in the cargo bay.

Removing the CD magazine

To insert or remove CDs from the CD magazine,

you must first remove it from the CD changer:

179

Inserting the CD magazine

Malfunctions with individual CDs/DVDs

If malfunctions only occur with individual CDs/

DVDs, one of the following factors may be the

cause.

Self-recorded CDs/DVDs

Possible reasons for malfunctions with self-

recorded CDs/DVDs are, e.g., inconsistent

data-creation or recording processes, or poor

quality or high age of the CD/DVD blank.

Only label CDs/DVDs on the top, with a pen

designed for this purpose.

Insert the CD magazine all the way in the direc-

tion of arrow 1 and close the cover, arrow 2.

The CD changer automatically reads in the

loaded CDs and is then ready for operation.

Damage prevention

Avoid leaving fingerprints, as well as dust,

scratches or moisture on the CDs/DVDs.

Keep CDs/DVDs in protective sleeves or cases.

Do not subject CDs/DVDs to temperatures over

1207/506, high levels of humidity or direct

sunlight.

Notes

BMW CD/DVD players and changers are

officially designated Class 1 laser prod-

ucts. Do not operate if the cover is damaged,

otherwise severe eye damage can result.

Do not use self-recorded CDs/DVDs with labels

applied as these can become detached during

playback due to heat build-up and can cause

irreparable damage to the device.

CDs/DVDs with copy protection

CDs/DVDs are often copy-protected by the

manufacturer. This can mean that some CDs/

DVDs cannot be played or can only be played to

a limited extent.

Only use round CDs/DVDs with a standard

diameter of 4.7 in/12 cm and do not play CDs/

DVDs with an adapter, e.g. Single-CDs, other-

wise the CDs or the adapter can jam and will no

longer eject.

Care

Clean the reflective signal side of CDs/DVDs as

needed by wiping it with a commercially avail-

able cleaning tissue in straight lines from the

center of the disc outwards.

Do not use a combined CD/DVD, e.g. DVD^Plus

otherwise the CD/DVD can jam and will no

longer eject.<

,

General malfunctions

BMW CD/DVD changers and players have been

optimized for performance in vehicles. In some

instances they may be more sensitive to faulty

CDs/DVDs than stationary devices would be.

If a CD/DVD cannot be played, first check if it

has been inserted correctly.

Humidity

High levels of humidity can lead to condensa-

tion on the CD/DVD or the laser's scan lens and

temporarily prevent playback.

180

AUX-In port

You can connect an external audio device, for

instance an MP3 player, and play audio tracks

over the car's loudspeaker system. You can

adjust the tone using iDrive.

until "AUX" is selected and press the con-

troller.

Connecting

Lift up the center armrest.

4. Select "AUX IN" and press the controller.

5. Adjust volume and tone, if necessary.

Via programmable memory keys

You can store the "AUX" function on the pro-

grammable memory keys to start audio play-

back, refer to page 21.

Connection for audio playback:

TRS connector 1/8 in/3.5 mm

To play audio tracks over the car's loudspeaker

system, connect the headset or line-out port of

the external device to the AUX-in port.

Starting audio playback

The audio device must be switched on.

iDrive, for operating principle refer to page 16.

1. Press the

button.

This opens the start menu.

2. Move the controller backwards to call up

"Entertainment".

3. If necessary, move the highlight marker to

the uppermost field. Turn the controller

181

*

USB-audio interface

You can connect audio devices, e.g. an iPod or

a USB device (MP3 player, USB stick), to the

USB-audio interface. They can be operated via

iDrive.

The iPod's menu structure is supported by the

USB-audio interface.

USB device

Standard audio formats, e.g. MP3, WMA, WAV

(PCM) and AAC, and playlists in the M3U format

can be played.

To connect the device, use the included

flexible adapter cable to protect the USB

interface and your USB device against physical

damage.<

Due the variety of audio devices on the market,

it cannot be guaranteed that every device will

be operable on the vehicle.

Ask your BMW center about what audio devices

are suitable.

To play audio tracks over the vehicle's loud-

speaker system, connect the USB device to

port 2.

After the device is connected for the first time,

the information on all tracks (e.g. artist, type of

music) and the playlists are transferred from the

USB device to the vehicle. This procedure may

take some time. The duration depends on the

USB device and the number of tracks.

Connecting

Lift up the center armrest.

During transfer, you can select the tracks using

the directories and file names.

After transfer, you can call up the tracks using

the information and playlists.

Information from up to four USB devices or for

about 20,000 tracks can be stored on the vehi-

cle.

If a fifth USB device is connected and if more

than 20,000 tracks are to be stored, the infor-

mation on existing tracks may be lost.

1

2

Connection for audio playback:

TRS connector 1/8 in/3.5 mm

Music tracks with integrated Digital

Rights Management (DRM) cannot be

played.<

USB interface

Depending on your vehicle's equipment

version, it may contain a storage pouch

for your audio device. The pouch is located

under the center armrest.<

Starting audio playback

iPod

Via iDrive

To connect the iPod use the BMW cable

adapter for Apple iPod. For more information,

contact your BMW center or go to the Internet:

If the audio device has a device name, the name

is displayed.

1. Press the

button.

This opens the start menu.

To play audio tracks over the vehicle's loud-

speaker system, connect the iPod to ports 1

and 2.

2. Move the controller backwards to call up

"Entertainment".

182

3. If necessary, move the highlight marker to

the uppermost field. Turn the controller

until "AUX" is selected and press the con-

troller.

1. Make your selection, e.g. "Playlists" or "Art-

ists", and press the controller.

2. Select a track and press the controller.

4. Select "USB" or the name of the audio

device and press the controller.

Displaying information about the track

Any information about the current track that has

been recorded can be displayed, e.g. the name

of the artist.

1. Press the controller during playback.

2. Select "Details" and press the controller.

Playback begins with the first track.

Via programmable memory keys

You can store the "USB" function on the pro-

grammable memory keys to start audio play-

back, refer to page 21.

The information is shown for the current track.

Selecting a track

You can call up the tracks using the playlists

and information. With USB devices you can also

call up tracks using the file directory. The tracks

can be displayed if they have been stored in the

Latin alphabet.

183

audio device may become damaged, which

could compromise safety while driving.<

Repeating tracks

1. Select the current track and press the con-

troller.

Depending on the configuration of the audio

files, e.g. bit rates greater than 256 KBit/s, the

files may not play back correctly in every case.

2. Select "Repeat track" and press the con-

troller.

Notes on connecting

>

The USB-audio interface acts as the power

supply to the connected audio devices, pro-

vided that this is supported by the audio

device. Therefore, do not connect the USB

audio device to the power socket in the

vehicle during operation.

>

Do not forcibly connect the plug to the USB

interface.

Do not connect devices such as fans or

lamps to the USB-audio interface.

Stop repeating:

1. Press the controller.

>

Do not connect USB hard disks.

2. Select "Repeat track" and press the con-

troller.

Do not use the USB-audio interface to

charge external devices.

Random play sequence

You can play the tracks in the selected list in

random order, e.g. all tracks of a single artist.

1. Select the current track and press the con-

troller.

2. Select "Random" and press the controller.

Stop random play:

1. Press the controller.

2. Select "Random" and press the controller.

Fast forward/reverse

Buttons on the steering wheel or CD player:

Press and hold the button for the

corresponding direction.

Notes

Do not expose the audio device to

extreme environmental conditions, e.g.

very high temperatures, refer to the operating

instructions of the audio device. Otherwise the

184

185

Entertainment for Your BMW M3 4 Door Fourth Generation (2007-2013)

Related Topics

Popular Owner Manuals

Latest Owner Manuals