Controls -> Climate control for Your BMW M3 4 Door Sixth Generation (2015-2025)

Controls  
Climate control  
Climate control  
the selected options or country versions. This  
also applies to safety-related functions and  
systems. The respectively applicable country  
provisions must be observed when using the  
respective features and systems.  
Vehicle features and options  
This chapter describes all standard, country-  
specific and optional features offered with the  
series. It also describes features that are not  
necessarily available in your car, e. g., due to  
Automatic climate control  
1
2
3
4
5
6
7
8
9
Seat heating, leftꢀꢁ52  
Temperature, left  
AUTO program  
10 Air distribution, right  
11 Air flow, AUTO intensity  
12 Air distribution, left  
Display  
13 Rear window defroster  
Maximum cooling  
Temperature, right  
Seat heating, rightꢀꢁ52  
Cooling function  
14 Interior temperature sensor — always keep  
clear  
15 Defrosts windows and removes condensa‐  
tion  
Automatic recirculated-air control/recircu‐  
lated-air mode  
134  
Online Edition for Part no. 01 40 2 960 759 - II/15  
Climate control  
Controls  
Intensity of the AUTO program  
Hints  
With the AUTO program activated, the auto‐  
matic intensity control can be changed.  
Sufficient ventilation  
When remaining in the vehicle for an ex‐  
tended period of time, ensure sufficient exter‐  
nal ventilation. Do not continuously use recir‐  
culated-air mode; otherwise the air quality in  
the interior continuously deteriorates and win‐  
dow condensation increases.◀  
Press the left or right side of the but‐  
ton: decrease or increase the inten‐  
sity.  
The selected intensity is shown on the display  
of the automatic climate control.  
Climate control functions in detail  
Temperature  
Maximum cooling  
Press button.  
The system is set to the lowest tem‐  
perature, optimum air flow and air circulation  
mode.  
Turn the ring to set the desired  
temperature.  
Air flows out of the vents to the upper body re‐  
gion. The vents need to be open for this.  
The automatic climate control reaches this  
temperature as quickly as possible, if needed  
by increasing the cooling or heating output,  
and then keeps it constant.  
The function is available above an external  
temperature of approx. 32 ℉/0 ℃ and with the  
engine running.  
Adjust air flow with the program active.  
Do not rapidly switch between different tem‐  
perature settings. Otherwise, the automatic cli‐  
mate control will not have sufficient time to ad‐  
just the set temperature.  
Cooling function  
The car's interior can only be cooled with the  
engine running.  
AUTO program  
Press button.  
Press button.  
The air will be cooled and dehumidi‐  
fied and, depending on the temperature set‐  
ting, warmed again.  
Air flow, air distribution and tempera‐  
ture are controlled automatically.  
Depending on the weather, the windshield and  
side windows may fog up briefly when the en‐  
gine is started.  
Depending on the selected temperature,  
AUTO intensity program and outside influen‐  
ces, the air is directed to the windshield, side  
windows, upper body, and into the footwell.  
The cooling function is switched on automati‐  
cally with the AUTO program.  
The cooling function, refer to page 135, is  
switched on automatically with the AUTO pro‐  
gram.  
When using the automatic climate control,  
condensation water, refer to page 158, devel‐  
ops that exits underneath the vehicle.  
At the same time, a condensation sensor con‐  
trols the program so as to prevent window  
condensation as much as possible.  
135  
Online Edition for Part no. 01 40 2 960 759 - II/15  
 
Controls  
Climate control  
If the windows are fogged over, press the  
AUTO button to utilize the condensation sen‐  
sor.  
Automatic recirculated-air control/  
recirculated-air mode  
You may respond to unpleasant odors or pollu‐  
tants in the immediate environment by tempo‐  
rarily suspending the supply of outside air. The  
system then recirculates the air currently  
within the vehicle.  
Air flow, manual  
To manually adjust air flow turn off AUTO pro‐  
gram first.  
Press button repeatedly to select an  
operating mode:  
Press the left or right side of the but‐  
ton: decrease or increase air flow.  
LEDs off: outside air flows in continuously.  
The selected air flow is shown on the display of  
the automatic climate control.  
Left LED on, automatic recirculated-air  
control: a sensor detects pollutants in the  
outside air and shuts off automatically.  
The air flow of the automatic climate control  
may be reduced automatically to save battery  
power.  
Right LED on, recirculated-air mode: the  
supply of outside air into the vehicle is per‐  
manently blocked.  
Rear window defroster  
Press button.  
Recirculated air mode switches off automati‐  
cally at low external temperatures after a cer‐  
tain amount of time in order to avoid window  
fogging.  
The rear window defroster switches  
off automatically after a certain period of time.  
If the windows are fogged over, switch off the  
recirculated-air mode and press the AUTO  
button to utilize the condensation sensor.  
Make sure that air can flow to the windshield.  
Defrosts windows and removes  
condensation  
Press button.  
Ice and condensation are quickly re‐  
moved from the windshield and the front side  
windows.  
Sufficient ventilation  
When remaining in the vehicle for an ex‐  
tended period of time, ensure sufficient exter‐  
nal ventilation. Do not continuously use recir‐  
culated-air mode; otherwise the air quality in  
the interior continuously deteriorates and win‐  
dow condensation increases.◀  
For this purpose, point the side vents onto the  
side windows as needed.  
Adjust air flow with the program active.  
If the windows are fogged over, you can also  
switch on the cooling function or press the  
AUTO button to utilize the condensation sen‐  
sor.  
Manual air distribution  
Press button repeatedly to select a  
program:  
Switching the system on/off  
Switch off  
Upper body region.  
Upper body region and footwell.  
Footwell.  
Press the left button for the minimum  
speed.  
Windows and footwell: driver's side only.  
Windows, upper body region and footwell:  
driver's side only.  
136  
Online Edition for Part no. 01 40 2 960 759 - II/15  
Climate control  
Controls  
Switching on  
Draft-free ventilation:  
Press any button except  
Adjust the vent to let the air flow past you.  
Rear window defroster.  
Seat heating.  
Ventilation in the rear  
Microfilter/activated-charcoal filter  
In external and recirculated air mode the mi‐  
crofilter/activated charcoal filter filters dust,  
pollen, and gaseous pollutants out of the air.  
This filter should be replaced during scheduled  
maintenance, refer to page 188, of your vehi‐  
cle.  
Thumbwheel for continuous opening and  
closing of the vents, arrow 1.  
Ventilation  
Thumbwheel to vary the temperature, ar‐  
row 2.  
Front ventilation  
Toward blue: colder.  
Toward red: warmer.  
Lever for changing the air flow direction,  
arrow 3.  
Parked-car ventilation  
The concept  
Lever for changing the air flow direction,  
arrow 1.  
The parked-car ventilation ventilates the vehi‐  
cle interior and lowers its temperature, if  
needed.  
Thumbwheels for opening and closing the  
vents continuously, arrows 2.  
The system can be switched on and off at any  
external temperature, either directly or by us‐  
ing two preset reel-on times. It remains  
switched on for 30 minutes.  
Thumbwheel to vary the temperature in  
the upper body region, arrow 3.  
Toward blue: colder.  
Toward red: warmer.  
Open the vents to allow air to flow out.  
The set interior temperature for the driver  
and passenger are not changed.  
Switching on/off directly  
On the Control Display:  
Adjusting the ventilation  
1. "Settings"  
Ventilation for cooling:  
2. "Climate"  
Direct vent in your direction when vehicle's  
interior is too hot.  
3. "Activate comf. ventilation"  
137  
Online Edition for Part no. 01 40 2 960 759 - II/15  
Controls  
Climate control  
The symbol on the automatic climate con‐  
trol flashes if the system is switched on.  
Preselecting the reel-on time  
On the Control Display:  
1. "Settings"  
2. "Climate"  
3. "Timer 1:" or "Timer 2:"  
4. Set the desired time.  
Activating the reel-on time  
On the Control Display:  
1. "Settings"  
2. "Climate"  
3. "Activate timer 1" or "Activate timer 2"  
The symbol on the automatic climate con‐  
trol lights up when the reel-on time is acti‐  
vated.  
The symbol on the automatic climate con‐  
trol flashes when the system has been  
switched on.  
The system will only be switched on within the  
next 24 hours. After that, it needs to be reacti‐  
vated.  
138  
Online Edition for Part no. 01 40 2 960 759 - II/15