Get QUICK REFERENCE -> Set-up and use Guide for BMW M4 2 Door Second Generation (2021-2025)

Set-up and use

QUICK REFERENCE

Set-up and use

Adjusting the distance

The distance to the back of the head is adjusted

via the backrest tilt.

Seats, mirrors and steering

wheel

Electrically adjustable seats

Adjusting the exterior mirrors

1

2

3

4

Backrest width

1

2

3

Adjusting

Forward/backward, height, seat tilt

Backrest tilt, head restraint

Lumbar support

Selecting a mirror, Automatic Curb Monitor

Folding in and out

Adjusting the steering wheel

Manual steering wheel adjustment

Adjusting the head restraint

Adjusting the height

1. Fold the lever down.

Press switch up or down.

2. Move the steering wheel to the preferred

height and angle to suit your seat position.

For equipment specification with M Carbon

bucket seat:

3. Fold the lever back up.

The height of the head restraints cannot be set.

20

Set-up and use

QUICK REFERENCE

Memory function

Principle

The following settings can be stored and, if nec‐

essary, retrieved using the memory function:

Infotainment

Radio

Buttons and functions

Depending on the country and equipment ver‐

sion, the radio has the following buttons.

▷ Seat position.

▷ Exterior mirror position.

▷ Height of the Head-up Display.

Button

Function

Press: turns sound output on/

off.

Storing

1. Set the desired position.

Turn: adjusts the volume.

2.

Press the button. The writing on the

button lights up.

Change the entertainment

source.

3. Press the desired button 1 or 2 at the door

while the writing is lit. A signal sounds.

Press once: changes the sta‐

tion/track.

Calling up settings

Press the desired button 1 or 2.

/

Press and hold: fast forward/

rewind the track.

Entering the rear

Programmable memory but‐

tons.

Fold the seat backrest forward

1. Pull the lever.

Changeover of waveband/satel‐

lite radio.

Menu Apps.

Navigation destination input

2. Fold the seat backrest forward.

To make the entry to the rear easier, the seat will

automatically move to the most forward position.

Entering a destination via the search

1.

2.

Press the button on the Controller.

"Where to?"

Push the seat backrest rearward

Push the seat backrest rearward and engage it.

3. Enter at least two letters or characters.

The seat moves automatically to the last seat po‐

sition that was stored.

Select point of interest categories from the

points of interest menu as needed.

21

Set-up and use

QUICK REFERENCE

The search term may be completed automat‐

ically in orange lettering.

▷ Via iDrive:

"Accept"

Move the Controller up to accept the sug‐

gested search term.

▷

/

4.

Select the icon, if needed.

Press the corresponding button on the steer‐

ing wheel.

A list of the results is displayed.

▷ Via the selection list in the instrument cluster:

5. If necessary, "Filter"

6. "Show results"

Use the thumbwheel on the steering wheel to

select: "Accept"

7. Select the desired entry.

8. If necessary, "Start guidance"

▷ Via touchscreen: tap on the corresponding

entry on the Control Display.

Connecting a mobile phone

General information

After the mobile phone is connected once to the

vehicle, the mobile phone can be operated using

iDrive and the steering wheel buttons.

Dialing a number

1. "COM"

2. If necessary, "Telephone"

3. "Dial number:"

4. Enter the numbers.

5.

Select the icon. The connection is estab‐

lished via the mobile phone to which this

function has been assigned.

Connecting the mobile phone via

Bluetooth

1. "COM"

Establish the connection via the additional tele‐

phone:

2. "Mobile devices"

3. Tilt the Controller to the right.

4. "New device"

1.

Press the button.

2. "Call via"

5. "Phone calls and audio"

The vehicle's Bluetooth name is displayed on

the Control Display.

Principle

CarPlay allows certain functions of a compatible

Apple iPhone to be used via Siri voice control

and iDrive.

6. Compare the control number displayed on

the Control Display with the control number

on the display of the mobile device, and con‐

firm that the two match.

7. A Bluetooth connection is established.

The mobile device is connected to the vehicle

and displayed in the device list.

Functional requirements

▷ Compatible iPhone, iPhone 5 or later with

iOS 7.1 or later.

Using the telephone

Accepting a call

Depending on the equipment, incoming calls can

be answered in several ways.

▷ Corresponding mobile contract.

▷ If necessary, the setting for mobile data must

be activated on the iPhone.

22

Set-up and use

QUICK REFERENCE

▷ Bluetooth, WLAN, and Siri voice control are

activated on the iPhone.

▷ WLAN is activated on the vehicle.

Pairing the iPhone with CarPlay

1. "COM"

2. "Mobile devices"

3. "New device"

4. "Phone calls and audio"

The vehicle's Bluetooth name is displayed on

the Control Display.

5. On the mobile device, search for Bluetooth

devices in the vicinity and select the vehicle.

A control number is displayed.

6. Compare the control number displayed on

the Control Display with the control number

on the display of the mobile device, and con‐

firm that the two match.

7. "Use Apple CarPlay"

The iPhone is connected to the vehicle and dis‐

played in the device list.

23

QUICK REFERENCE -> Set-up and use for Your BMW M4 2 Door Second Generation (2021-2025)

Related Topics

QUICK REFERENCE

Popular Owner Manuals

Latest Owner Manuals