86nDynamic Stability Control (DSC)
DSC maintains vehicle stability, even in
critical driving situations.
To reactivate the system
Press the button again; the indicator
lamp goes out.
The system optimizes vehicle stability
during acceleration and when starting
from a full stop, as well as optimizing
traction. In addition, the system recog-
nizes unstable vehicle conditions
(understeering or oversteering, for
example) and holds the vehicle on a
sure course by intervening via the
engine and by braking intervention at
the individual wheels.
The laws of physics cannot be
repealed, even with DSC. An
appropriate driving style always
remains the responsibility of the driver.
We therefore urge you to avoid using
the additional safety margin of the
system as an excuse for taking risks.<
For additional details concerning DSC,
please refer to the chapter describing
"Advanced technology" on page 178.
To deactivate the system
The system starts up automatically
each time you start the engine.
Press the button (arrow); the indicator
lamp comes on and stays on.
Indicator lamp
When DSC is deactivated, you are
driving with conventional power
transfer.
The indicator lamp in the instru-
ment cluster goes out shortly
after you switch on the ignition.
Refer to page 21.
In the following exceptional circum-
stances, it may be effective to deacti-
vate the DSC for a short period:
Indicator lamp flashes:
The system is active and governs the
drive and braking forces.
> When rocking the vehicle or starting
off in deep snow or on loose surfaces
> When driving with snow chains.
Refer also to page 125.
If the indicator lamp fails to go out after
the engine is started, or if it comes on
during normal driving and stays on:
There is a system malfunction or the
system was deactivated with the button.
You can continue to drive the vehicle
normally, but without DSC. Please
consult your BMW center for repairs.
English 
