On the road
QUICK REFERENCE
Before disconnecting and connecting a charg-
ing cable, clean the area between the charg-
ing socket flap and charging socket and the
charging cable plug as necessary, for instance
remove snow.
Fuel filler cap
1. To open the fuel filler flap, press on the rear
edge, arrow. The fuel filler flap opens.
If necessary, unlock the charging cable before
removing.
The charging status is indicated on the indica-
tor light on the charging socket.
Keep the charging socket flap and, if neces-
sary, the charging socket lid closed when the
charging socket is not used.
2. Open the fuel filler cap counterclockwise.
Wheels and tires
Tire pressure specifications
The tire inflation pressure specifications can be
found in the tire inflation pressure table in the
printed Owner's Manual.
After correcting the tire pressure
If equipped with a Tire Pressure Monitor, the
corrected tire pressures are applied automati-
cally. Make sure that the correct tire settings
have been made. With tires that cannot be
found in the tire pressure values on the control
display, reset the Tire Pressure Monitor (TPM).
3. Place the fuel filler cap in the bracket on the
fuel filler flap.
If equipped with a flat tire monitor, reinitialize
the flat tire monitor.
Checking the tire pressure
Regularly check the tire inflation pressure and
correct it as needed:
▷
▷
At least twice a month.
Before embarking on an extended trip.
Charging the vehicle
Depending on national-market version, use a
mode 2 charging cable, fast charging cable
(mode 3), or the permanently installed cable
of a charging station to charge the vehicle.
Electronic oil measurement
Functional requirements
A current measured value is available after ap-
prox. 30 minutes of normal driving with the
combustion engine running.
The charging cable can be stowed in the cargo
area, for instance under the cargo floor panel
or in a bag.
31
English 
