Get Displays Guide for BMW X4 Suv First Generation (2014-2018)

Controls

Displays

to the selected options or country versions.

This also applies to safety-related functions

and systems. When using these functions and

systems, the applicable country provisions

must be observed.

Vehicle features and options

This chapter describes all standard, country-

specific and optional features offered with the

series. It also describes features that are not

necessarily available in your vehicle, e. g., due

Overview, instrument cluster

1

2

3

4

Fuel gaugeꢀꢁ87

5

6

7

8

Engine oil temperatureꢀꢁ87

Current fuel consumption

Electronic displaysꢀꢁ82

Reset milesꢀꢁ87

Speedometer

Messages, for example, Check Control

Tachometerꢀꢁ87

Electronic displays

▷

Selection lists, refer to page 91.

▷

Date, refer to page 88.

External temperature, refer to page 87.

Auto Start/Stop function, refer to page 68.

On-board computer, refer to page 92.

Energy recovery, refer to page 89.

Transmission display, refer to page 80.

Miles/trip miles, refer to page 87.

82

Displays

Controls

▷

Messages, e.g., Check Control, refer to

page 83.

objects are detected on the front passenger

seat.

Navigation display, see Owner's Manual for

Navigation, Entertainment and Communi‐

cation.

Indicator lamp flashes or is illuminated: safety

belt on the driver or passenger side is not

buckled. The safety belt reminder can also be

activated if objects are placed on the front pas‐

senger seat.

▷

Range, refer to page 88.

Status, Driving Dynamics Control, refer to

page 131.

Make sure that the safety belts are positioned

correctly.

▷

Service requirements, refer to page 89.

Speed Limit Info, refer to page 90.

Time, refer to page 88.

Airbag system

Airbag system and belt tensioner are

not working.

Have the vehicle checked immediately

by a dealer’s service center or another quali‐

fied service center or repair shop.

Check Control

The concept

The Check Control system monitors functions

in the vehicle and notifies you of malfunctions

in the monitored systems.

Parking brake

The parking brake is set.

A Check Control message is displayed as a

combination of indicator or warning lights and

text messages in the instrument cluster and in

the Head-up Display.

For additional information, see Releas‐

ing the parking brake, refer to page 71.

Brake system

In addition, an acoustic signal may sound and a

text message may appear on the Control Dis‐

play.

Braking system impaired. Continue to

drive moderately.

Have the vehicle checked immediately

by a dealer’s service center or another

qualified service center or repair shop.

Indicator/warning lights

General information

The indicator and warning lights in the instru‐

ment cluster can light up in a variety of combi‐

nations and colors.

Approach control warning

Indicator lamp illuminates: advance

warning is issued, for example when

there is the impending danger of a col‐

lision or the distance to the vehicle ahead is

too small.

Several of the lights are checked for proper

functioning and light up temporarily when the

engine is started or the ignition is switched on.

Red lights

Increase distance.

Indicator lamp flashes: acute warning of the

imminent danger of a collision when the vehi‐

cle approaches another vehicle at a relatively

high differential speed.

Safety belt reminder

Safety belt on the driver's side is not

buckled. For some country-specific

models: passenger belt is not worn or

83

Controls

Displays

Intervention by braking or make an evasive ma‐

neuver.

DSC Dynamic Stability Control

The indicator lamp flashes: DSC con‐

trols the drive and braking forces. The

vehicle is stabilized. Reduce speed and

adapt driving style to the driving circumstan‐

ces.

Person warning

Symbol in the instrument cluster.

If a collision with a person detected in

this way is imminent, the symbol lights

up and a signal sounds.

The indicator lamp lights up: DSC has mal‐

functioned.

Have the system checked by a dealer’s service

center or another qualified service center or re‐

pair shop.

Orange lights

For additional information, refer to Dynamic

Stability Control DSC, refer to page 127.

Active Cruise Control

The number bars shows the selected

distance from the vehicle driving

ahead.

DSC Dynamic Stability Control is

deactivated or DTC Dynamic Traction

Control is activated

For additional information, refer to Active

Cruise Control with Stop&Go function, ACC,

refer to page 134.

DSC Dynamic Stability Control is deac‐

tivated or DTC Dynamic Traction Con‐

trol is activated.

Vehicle detection, Active Cruise Control

For additional information, refer to Dynamic

Stability Control DSC, refer to page 127, and

Dynamic Traction Control DTC, refer to

page 128.

Indicator lamp illuminates: a vehicle has

been detected ahead of you.

Indicator lamp flashes: the conditions

are not adequate for the system to work.

The system was deactivated but applies the

brakes until you actively resume control by

pressing on the brake pedal or accelerator

pedal.

Flat Tire Monitor FTM

The Flat Tire Monitor signals a loss of

tire inflation pressure in a tire.

Reduce your speed and stop cau‐

tiously. Avoid sudden braking and steering ma‐

neuvers.

Yellow lights

For more information, see Flat Tire Monitor, re‐

fer to page 110.

Anti-lock Braking System ABS

Braking force boost may not be work‐

ing. Avoid abrupt braking. Take the lon‐

ger braking distance into account.

Tire Pressure Monitor TPM

The indicator lamp is illuminated.

Have the system immediately checked

by a dealer’s service center or another

qualified service center or repair shop.

The Tire Pressure Monitor reports a

low tire inflation pressure or a flat tire.

Observe the information in the Check Control

message.

84

Displays

Controls

The indicator lamp flashes and is then illumi‐

nated continuously.

For additional information, refer to Lane depar‐

ture warning, refer to page 122.

No flat tire or loss of tire inflation pressure can

be detected.

Green lights

▷

Interference caused by systems or devices

with the same radio frequency: After leav‐

ing the area of the interference, the system

automatically becomes active again.

Turn signal

Turn signal switched on.

Unusually rapid flashing of the indicator

lamp indicates that a turn signal bulb

has failed.

▷

TPM was unable to complete the reset.

Reset the system again.

A wheel without TPM electronics is

mounted: Have it checked by a dealer’s

service center or another qualified service

center or repair shop as needed.

For additional information, refer to Turn signal,

refer to page 73.

Parking lights, headlight

▷

Malfunction: have the system checked by a

dealer’s service center or another qualified

service center or repair shop.

Parking lights or headlights are acti‐

vated.

For more information, see Tire Pressure Moni‐

tor, refer to page 106.

For additional information, refer to

Parking lights/low beams, headlamp control,

refer to page 98.

Steering system

Front fog lights

Steering system in some cases not

working.

Front fog lights are activated.

Have the steering system checked by a

dealer’s service center or another qualified

service center or repair shop.

For additional information, refer to

Front fog lights, refer to page 101.

High-beam Assistant

Engine functions

High-beam Assistant is switched on.

Engine function impaired.

High beams are switched on and off

automatically depending on the traffic

situation.

Have the vehicle checked by a dealer’s

service center or another qualified

service center or repair shop.

For additional information, refer to High-beam

Assistant, refer to page 101.

For additional information, refer to On-board

Diagnostics socket, refer to page 226.

Cruise control

Lane departure warning

The system is switched on. It maintains

the speed that was set using the con‐

trol elements on the steering wheel.

System is switched on and under cer‐

tain circumstances warns if a detected

lane is left without flashing beforehand.

85

Controls

Displays

Automatic Hold

Contact a dealer’s service center or an‐

other qualified service center or repair

shop.

Automatic Hold is activated. The vehi‐

cle is automatically held in place when

it is stationary.

▷

"Roadside Assistance"

Contact Roadside Assistance.

For more information, see Automatic Hold, re‐

fer to page 71.

Hiding Check Control messages

Blue lights

High beams

High beams are activated.

For additional information, see High

beams, refer to page 73.

General lamps

Check Control

Press and hold button on signal lever.

▷

Some Check Control messages are dis‐

played continuously and are not cleared

until the malfunction is eliminated. If sev‐

eral malfunctions occur at once, the mes‐

sages are displayed consecutively.

At least one Check Control message is

displayed or is stored.

SMS text messages

These messages can be hidden for approx.

8 seconds. After this time, they are dis‐

played again automatically.

SMS text messages in combination with a

symbol in the instrument cluster explain a

Check Control message and the meaning of

the indicator and warning lights.

▷

Other Check Control messages are hidden

automatically after approx. 20 seconds.

They are stored and can be displayed

again later.

Supplementary text messages

Additional information, such as on the cause of

an error or the required action, can be called up

via Check Control.

Displaying stored Check Control

messages

On the Control Display:

With urgent messages the added text will be

automatically displayed on the Control Display.

1. "Vehicle info"

Symbols

2. "Vehicle status"

Within the supplementary text, the following

functions can be selected independent of the

check control message.

3.

"Check Control"

4. Select the text message.

▷

Display additional information about

the Check Control message in the

Integrated Owner's Manual.

Messages after trip completion

Special messages displayed while driving are

displayed again after the ignition is switched

off.

▷

"Service request"

86

Displays

Controls

Check the coolant level.

Fuel gauge

Vehicle tilt position may cause

the display to vary.

Odometer and trip odometer

Depending on the equipment

version, the arrow beside the

fuel pump symbol shows which

Display

▷

Odometer, arrow 1.

side of the vehicle the fuel filler flap is on.

Trip odometer, arrow 2.

Notes on refueling, refer to page 196.

The yellow indicator lamp illuminates,

once the fuel reserve is reached.

Show/reset miles

Press the button.

Tachometer

Always avoid engine speeds in the red warning

field. In this range, the fuel supply is inter‐

rupted to protect the engine.

▷

When the ignition is

switched off, the time, the

external temperature and

the odometer are displayed.

▷

When the ignition is switched on, the trip

odometer is reset.

Engine oil temperature

▷

Cold engine: the pointer is at

the low temperature end.

Drive at moderate engine

and vehicle speeds.

External temperature

WARNING

Even at temperatures above +37 ℉/+3 ℃

there can be a risk of icy roads, e.g., on bridges

or shady sections of road. There is a risk of an

accident. Adjust your driving style to the

▷

Normal operating tempera‐

ture: the pointer is in the

middle or in the left half of

the temperature display.

weather conditions at low temperatures.◀

▷

Hot engine: the pointer is at the high end of

the temperature range. A Check Control

message is also displayed.

If the indicator drops to

+37 ℉/+3 ℃ or lower, a signal

sounds.

When the engine oil temperature is too

high, a red indicator lamp is displayed.

A Check Control message is

displayed.

There is an increased risk of ice on roads.

Coolant temperature

If the coolant along with the engine becomes

too hot, a Check Control message is displayed.

A red indicator lamp is displayed.

87

Controls

Displays

2. "Instrument cluster"

3. "Additional indicators"

Time

Date

The time is displayed in the in‐

strument cluster.

With navigation system: range with

destination guidance active

The time can be set on the Con‐

trol Display.

If respective equipment is fitted

and destination guidance is ac‐

tive, the remaining range is dis‐

played when the destination is

reached.

The date is displayed in the in‐

strument cluster.

The date can be set on the Con‐

trol Display.

Current fuel consumption

Display

Range

Depending on your vehicle's op‐

tional features, the current fuel

consumption can be displayed

as scale with mechanical pointer

or as digital bar display in the

Display

With a low remaining range:

▷

A Check Control message is

displayed briefly.

lower area of the tachometer.

▷

The remaining range is

shown on the onboard com‐

puter.

The current consumption displays the current

fuel consumption. Check whether you are cur‐

rently driving in an efficient and environmen‐

tally-friendly manner.

▷

With a dynamic driving style, e.g., taking

curves aggressively, the engine function is

not always ensured.

Displaying the current fuel

consumption

Depending on your vehicle's optional features,

the current fuel consumption can also be dis‐

played as bar in the instrument cluster.

The Check Control message appears continu‐

ously below a range of approx. 30 miles/50 km.

NOTE

With a range of less than 30 miles/50 km

it is possible that the engine will no longer have

sufficient fuel. Engine functions are not en‐

sured anymore. There is a risk of property

damage. Refuel promptly.◀

1. "Settings"

2. "Instrument cluster"

3. "Additional indicators"

Displaying the cruising range

Depending on your vehicle's optional features,

the range can also be displayed as bar in the

instrument cluster.

1. "Settings"

88

Displays

Controls

Symbols

Energy recovery

Sym‐

bols

Description

Display

The energy of motion of the ve‐

No service is currently required.

hicle is converted to electrical

energy while coasting. The vehi‐

cle battery is partially charged

and fuel consumption can be re‐

The deadline for scheduled mainte‐

nance or a legally mandated inspec‐

tion is approaching.

duced.

The service deadline has already

passed.

Service requirements

General information

Entering appointment dates

Enter the dates for the required inspections.

After the ignition is turned on the instrument

cluster briefly displays available driving dis‐

tance or time to the next scheduled mainte‐

nance.

Make sure that the vehicle's date and time are

set correctly.

A service advisor can read out the current

service requirements from your remote con‐

trol.

On the Control Display:

1. "Vehicle info"

2. "Vehicle status"

Display

3.

"Service required"

4. "§ Vehicle inspection"

5. "Date:"

Detailed information on service

requirements

6. Adjust the settings.

7. Confirm.

More information on the scope of service re‐

quired can be displayed on the Control Dis‐

play.

The entered date is stored.

1. "Vehicle info"

Automatic Service Request

2. "Vehicle status"

Data regarding the service status or legally

mandated vehicle inspections is automatically

transmitted to your dealer’s service center be‐

fore a service due date.

3.

"Service required"

Required maintenance procedures and le‐

gally mandated inspections are displayed.

4. Select an entry to call up detailed informa‐

tion.

You can check when your dealer’s service cen‐

ter was notified.

On the Control Display:

1. "Vehicle info"

2. "Vehicle status"

3. Open "Options".

4. "Last Service Request"

89

Controls

Displays

on the situation. The system takes into ac‐

count the information stored in the navigation

system and also displays speed limits present

on routes without signs.

Gear shift indicator

Concept

The system recommends the most fuel effi‐

cient gear for the current driving situation.

Safety information

WARNING

General information

The system does not release from the

personal responsibility to correctly assess visi‐

bility and traffic situation. There is a risk of an

accident. Adjust the driving style to the traffic

conditions. Watch traffic closely and actively

intervene in the respective situations.◀

Depending on the vehicle's features and coun‐

try version of the vehicle, the gear shift indica‐

tor is active in the manual mode of the Step‐

tronic transmission and with manual

transmission.

Suggestions to shift gear up or down are dis‐

played in the instrument cluster.

Overview

Camera

On vehicles without a gear shift indicator, the

engaged gear is displayed.

Steptronic transmission: displaying

Example

Description

Fuel efficient gear is set.

Shift into fuel efficient gear.

The camera is installed near the interior mirror.

Keep the windshield in front of the interior mir‐

ror clean and clear.

Speed Limit Info

Concept

Switching on/off

On the Control Display:

Speed Limit Info shows the current maximum

permitted speed in the instrument cluster.

1. "Settings"

2. "Instrument cluster"

3. "Speed limit information"

General information

If Speed Limit Info is switched on, it can be dis‐

played on the CID (central information display)

in the instrument cluster via the onboard com‐

puter.

The camera in the area of the interior mirror

detects traffic signs at the edge of the road as

well as variable overhead sign posts. Traffic

signs with extra symbols for wet road condi‐

tions, etc. are also detected and compared

with the vehicle's onboard data, such as for the

rain sensor, and will be displayed depending

90

Displays

Controls

▷

If the traffic signs are non-conforming.

Display

The following is displayed in the instrument

cluster:

During calibration of the camera immedi‐

ately after vehicle delivery.

▷

When signs that are valid for a parallel road

are detected.

Speed Limit Info

Current speed limit.

Selection lists in the

instrument cluster

General information

Speed Limit Info not available.

Depending on your vehicle's equipment, the

following can be displayed or operated using

the buttons and the thumbwheel on the steer‐

ing wheel as well as the displays in the instru‐

ment cluster and the Head-up Display:

Speed Limit Info can also be displayed in the

Head-up Display.

▷

Current audio source.

Redial phone feature.

System limits

Turn on voice activation system.

The system may not be fully functional and

may provide incorrect information in the fol‐

lowing situations:

Activating a list and adjusting the

setting

▷

In heavy fog, rain or snowfall.

When signs are fully or partially concealed

by objects, stickers or paint.

▷

When driving very close to the vehicle in

front of you.

When driving toward bright lights or strong

reflections.

When the windshield in front of the interior

mirror is fogged over, dirty or covered by a

sticker, etc.

On the right side of the steering wheel, turn

the thumbwheel to activate the corresponding

list.

▷

In the event of incorrect detection by the

camera.

1. Turn the thumbwheel and select the de‐

sired setting.

If the speed limits stored in the navigation

system are incorrect.

2. Press the thumbwheel.

In areas not covered by the navigation sys‐

tem.

When roads differ from the navigation,

such as due to changes in road routing.

When passing buses or trucks with a

speed sticker.

91

Controls

Displays

▷

Date.

Display

Speed Limit Info.

Time of arrival.

When destination guidance is activated in

the navigation system.

▷

Distance to destination.

When destination guidance is activated in

the navigation system.

Arrow view of navigation system.

Depending on your vehicle's optional features,

the list in the instrument cluster can differ from

the illustration shown.

When destination guidance is activated in

the navigation system.

When the arrow view in the Head-up Dis‐

play is inactive.

▷

Compass display in the navigation system.

ECO PRO bonus range.

Onboard computer

Calling up information on the CID

(central information display)

Selecting information

Depending on the vehicle equipment version,

you can select what information from the on‐

board computer is to be displayed on the info

display of the instrument cluster.

On the Control Display:

1. "Settings"

2. "Instrument cluster"

3. Select the desired information.

Settings are stored for the profile currently

used.

Press and hold button on signal lever.

Information is displayed in the CID (central in‐

formation display) of the instrument cluster.

Information in detail

Range

Information at a glance

Displays the estimated cruising range available

with the remaining fuel.

CID (central information display)

Repeatedly pressing the button

on the turn signal lever calls up

the following information in the

CID (central information display):

It is calculated based on your driving style over

the last 20 miles/30 km.

Average fuel consumption

▷

Range.

The average fuel consumption is calculated for

the period while the engine is running.

▷

Average consumption, fuel.

Average speed.

92

Displays

Controls

The average fuel consumption is calculated for

the distance traveled since the last reset by the

onboard computer.

Compass

With a navigation system: com‐

pass display for the driving di‐

rection.

Average speed

Periods in which the vehicle is parked with the

engine manually stopped are not included in

the calculation of the average speed.

Trip onboard computer

The vehicle features two types of onboard

computers.

Resetting average values

▷

"Onboard info": the values can be reset as

often as necessary.

▷

"Trip computer": the values provide an

overview of the current trip.

Resetting the trip onboard computer

On the Control Display:

1. "Vehicle info"

Press and hold button on turn signal lever.

2. "Trip computer"

3. "Reset": all values are reset.

Distance to destination

"Automatically reset": all values are reset

approx. 4 hours after the vehicle came to a

standstill.

The distance remaining to the destination is

displayed if a destination is entered in the navi‐

gation system before the trip is started.

Display on the Control Display

Display the onboard computer or trip onboard

computer on the Control Display.

The distance to the destination is adopted au‐

tomatically.

Time of arrival

On the Control Display:

The estimated time of arrival is

displayed if a destination is en‐

tered in the navigation system

before the trip is started.

1. "Vehicle info"

2. "Onboard info" or "Trip computer"

Resetting the fuel consumption and

speed

On the Control Display:

The time must be correctly set.

Speed Limit Info

Further information, see chapter Speed Limit

Info.

1. "Vehicle info"

2. "Onboard info"

3. "Consumpt." or "Speed"

4. "Yes"

93

Controls

Displays

Setting your current speed as the

speed warning

Sport displays

The concept

On the Control Display:

On the Control Display, the current values for

performance and torque can be displayed if

the vehicle is appropriately equipped.

1. "Settings"

2. "Speed"

3. "Select current speed"

4. Press the controller.

Displaying sport displays

1. "Vehicle info"

The current vehicle speed is stored as the

speed warning.

2. "Sport displays"

Settings on the Control

Display

Speed warning

Concept

Time

A speed limit can be set that when reached will

cause a warning to be issued.

Setting the time zone

1. "Settings"

General information

The warning is repeated if the vehicle speed

drops below the set speed limit once by at

least 3 mph/5 km/h.

2. "Time/Date"

3. "Time zone:"

4. Select the desired time zone.

The time zone is stored.

Displaying, setting or changing the

speed warning

Setting the time

1. "Settings"

2. "Time/Date"

3. "Time:"

On the Control Display:

1. "Settings"

2. "Speed"

3. "Warning at:"

4. Turn the controller until the desired hours

are displayed.

4. Turn the controller until the desired speed

is displayed.

5. Press the controller.

Speed warning is stored.

6. Turn the controller until the desired mi‐

nutes are displayed.

7. Press the controller.

The time is stored.

Activating/deactivating the speed

warning

On the Control Display:

Setting the time format

1. "Settings"

2. "Speed"

2. "Time/Date"

3. "Warning"

4. Press the controller.

94

Displays

Controls

3. "Format:"

Settings are stored for the profile currently

used.

4. Select the desired format.

The time format is stored.

Setting the voice dialog

Voice dialog for the voice activation system,

refer to page 28.

Automatic time setting

Depending on your vehicle's optional features,

the time, date and, if needed, the time zone are

updated automatically.

Units of measurement

Setting the units of measurement

1. "Settings"

To set the units for fuel consumption, route/

distance and temperature:

2. "Time/Date"

3. "Auto time set"

1. "Settings"

Date

2. "Language/Units"

3. Select the desired menu item.

4. Select the desired unit.

Setting the date

1. "Settings"

2. "Time/Date"

3. "Date:"

Settings are stored for the profile currently

used.

4. Turn the controller until the desired day is

displayed.

Brightness

Setting the brightness

5. Press the controller.

To set the brightness of the Control Display:

6. Make the necessary settings for the month

and year.

1. "Settings"

The date is stored.

2. "Control display"

3. "Brightness"

Setting the date format

1. "Settings"

4. Turn the controller until the desired bright‐

ness is set.

2. "Time/Date"

5. Press the controller.

3. "Format:"

Settings are stored for the profile currently

used.

4. Select the desired format.

The date format is stored.

Depending on the light conditions, the bright‐

ness settings may not be clearly visible.

Language

Activating/deactivating the display of

the current vehicle position

If GPS geolocation has been activated, the cur‐

rent vehicle position can be displayed in the

BMW ConnectedDrive app or in the Connec‐

tedDrive customer portal.

Setting the language

To set the language on the Control Display:

1. "Settings"

2. "Language/Units"

3. "Language:"

1. "Settings"

4. Select the desired language.

95

Controls

Displays

2. "GPS tracking"

3. "GPS tracking"

Display

Overview

The following information is displayed on the

Head-up Display:

Head-up Display

▷

Speed.

Concept

Navigation system.

This system projects important information

into the driver's field of vision, e.g., the speed.

Check Control messages.

Selection list from the instrument cluster.

Driver assistance systems.

The driver can get information without averting

his or her eyes from the road.

Some of this information is only displayed

briefly as needed.

Overview

Selecting displays in the Head-up

Display

On the Control Display:

1. "Settings"

2. "Head-Up Display"

3. "Displayed information"

4. Select the desired displays in the Head-up

Display.

Display visibility

The visibility of the displays in the Head-up

Display is influenced by the following factors:

Settings are stored for the profile currently

used.

Setting the brightness

The brightness is automatically adjusted to the

ambient brightness.

▷

Certain sitting positions.

Objects on the cover of the Head-up Dis‐

play.

The basic setting can be adjusted.

On the Control Display:

▷

Sunglasses with certain polarization filters.

Wet roads.

Unfavorable light conditions.

1. "Settings"

If the image is distorted, have the basic set‐

tings checked by a dealer’s service center or

another qualified service center or repair shop.

2. "Head-Up Display"

3. "Brightness"

4. Turn the controller until the desired bright‐

ness is set.

Follow the instructions for cleaning the Head-

up Display, refer to page 245.

5. Press the controller.

When the low beams are activated, the bright‐

ness of the Head-up Display can be addition‐

ally influenced using the instrument lighting.

Switching on/off

1. "Settings"

2. "Head-Up Display"

3. "Head-Up Display"

Settings are stored for the profile currently

used.

96

Displays

Controls

Adjusting the height

On the Control Display:

1. "Settings"

2. "Head-Up Display"

3. "Height"

4. Turn the controller until the desired height

is reached.

5. Press the controller.

Settings are stored for the profile currently

used.

Setting the rotation

The screen of the Head-up Display can be ro‐

tated around its own axis.

On the Control Display:

1. "Settings"

2. "Head-Up Display"

3. "Rotation"

4. Turn the controller until the desired setting

is selected.

5. Press the controller.

Settings are stored for the profile currently

used.

Special windshield

The windshield is part of the system.

The shape of the windshield makes it possible

to display a precise image.

A film in the windshield prevents double im‐

ages from being displayed.

For this reason, it is strongly suggested to

have the special windshield replaced by a deal‐

er’s service center or another qualified service

center or repair shop.

97

Displays for Your BMW X4 Suv First Generation (2014-2018)

Related Topics

Popular Owner Manuals

Latest Owner Manuals