Opening and closing
Controls
2. Start the engine within 10 seconds.
Malfunction
If the remote control is not detected, slightly
change the position of the remote control and
repeat the procedure.
General information
A Check Control message is displayed.
Remote control detection by the vehicle may
malfunction under the following circumstan‐
ces:
Integrated key
▷
▷
▷
The battery of the remote control is dis‐
charged. Replace the battery, refer to
page 36.
General information
The driver's door can be locked and unlocked
without remote control using the integrated
key.
Interference of the radio connection from
transmission towers or other equipment
with high transmitting power.
Safety information
Shielding of the remote control due to
metal objects.
WARNING
Unlocking from the inside is only possi‐
ble with special knowledge.
Do not transport the remote control to‐
gether with metal objects.
If people must spend a longer time in the vehi‐
cle while it is very hot or cold outside, there is a
risk of injury or danger to life. Do not lock the
vehicle from the outside when there are people
in it.◀
▷
▷
Interference of the radio connection from
mobile phones or other electronic devices
in direct proximity to the remote control.
Do not transport the remote control to‐
gether with electronic devices.
NOTE
Interference of radio transmission by a
charging process of a mobile device, e.g.,
charging of a mobile phone.
The door lock is permanently joined with
the door. The door handle can be moved.
When pulling the door handle with the
integrated key inserted, paint or key can be
damaged. There is a risk of property damage.
Remove the integrated key before pulling the
outside door handle.◀
In the case of interference, the vehicle can be
unlocked and locked from the outside with the
integrated key, refer to page 37.
Starting the engine via emergency
detection of the remote control
1. Hold the remote control with its back
against the marked area on the steering
column.
37
English 