Safety
Controls
cording to their respective set‐
tings.
System limits
Safety information
▷
LED lights up orange or goes out respec‐
tive to their individual settings.
WARNING
Adjust as needed. Individual settings are
stored for the profile currently used.
The system can react incorrectly or not
at all due to the system limits. There is a risk of
accidents or risk of property damage. Observe
the information regarding the system limits
and actively intervene, if needed.◀
Press button again:
▷
All Intelligent Safety systems are
activated.
▷
The LED lights up green.
Functional limitations
The system may not be fully functional in the
following situations:
Hold down button:
▷
All Intelligent Safety systems are
switched off.
The LED goes out.
▷
▷
In heavy fog, rain or snowfall.
In the event of missing, worn, poorly visi‐
ble, merging, diverging, or multiple lane
markings such as in construction areas.
▷
Display in the instrument cluster
▷
When lane markings are covered in snow,
ice, dirt or water.
▷
▷
Lines: system is activated.
▷
▷
In tight curves or on narrow lanes.
Arrows: at least one lane marking
was detected and warnings can be
issued.
When the lane markings are covered by
objects.
▷
When driving very close to the vehicle in
front of you.
Issued warning
▷
▷
When driving toward bright lights.
If you leave the lane and if a lane marking has
been detected, the steering wheel begins vi‐
brating.
When the windshield in front of the interior
mirror is fogged over, dirty or covered with
stickers, etc.
If the turn signal is set before changing the
lane, a warning is not issued.
▷
During calibration of the camera immedi‐
ately after vehicle delivery.
End of warning
The warning is canceled in the following situa‐
tions:
▷
▷
▷
▷
Automatically after approx. 3 seconds.
When returning to your own lane.
When braking hard.
When using the turn signal.
123
English 