Get CONTROLS -> Climate control Guide for BMW X4 Suv Second Generation (2019-2025)

Climate control

CONTROLS

Climate control

▷

Gaseous pollutants are filtered.

Vehicle features and options

Microbial particles, viruses and allergens

are filtered.

This chapter describes all standard, country-

specific, and optional equipment offered with

the series. It also describes features and func-

tions that are not necessarily available in the

vehicle, e.g., due to the selected options or

country versions. This also applies to safety

functions and systems. When using these

functions and systems, the applicable laws

and regulations must be observed.

The manufacturer of the vehicle recommends

having the interior filter changed during vehicle

maintenance.

Automatic climate control

Overview

Buttons in the vehicle

Air quality

General information

The air quality in the interior is improved by the

following components:

▷

Emission tested passenger compartment.

Interior filter.

Air conditioning system to control the

temperature, air flow and recirculated-air

mode.

Climate control functions

▷

Pre-ventilation.

Ionizer.

Button

Function

Fragrancing.

Temperature.

Automatic recirculated-air control.

Air recirculation mode.

Maximum cooling.

AUTO program.

Interior filter

The interior filter cleans the incoming fresh

air or the circulated interior air in recirculation

mode.

Depending on the equipment:

▷

Dust and pollen is filtered out from the in-

flowing air.

Air flow, manual.

▷

Nano-particle emissions are reduced.

Switching off.

Intensity AUTO program.

271

Climate control

CONTROLS

Switching climate control functions

on/off

Button

Function

Air distribution, manual.

Turning on

Press one of the following buttons:

Defrost function.

▷

Temperature.

Rear window defroster.

Climate menu.

Maximum cooling.

Depending on the equipment:

Seat heating, refer to page 126.

AUTO program.

Air recirculation mode.

Upper side of the air flow, manual button.

Air distribution, manual.

Defrosting the windshield

or

Active seat ventilation, refer to

page 127.

Turning off

Air conditioning.

Complete system:

Open Climate menu such as

for the following settings: up-

per body temperature adjust-

ment, pre-ventilation.

Press and hold the button until the

integrated automatic climate control

switches off.

Some of the functions can also be used via

voice, e.g., temperature.

Temperature

Principle

Opening the Climate menu

The automatic climate control cools or heats

to the configured temperature and then keeps

the temperature constant.

Press the button.

The Climate menu is displayed.

Setting the temperature

Using the button:

For example, the following climate control

functions can be accessed via the Climate

menu:

Press the upper or lower button side

to set the desired temperature.

▷

Fragrance.

Air quality.

Via iDrive:

Heating/ventilation.

Pre-ventilation/heating

Air conditioning.

1. "CAR"

2. "Settings"

3. "Climate control"

4. "Heating/ventilation"

5. "Driver" or "Front passenger"

6. "Temperature:"

Individual settings can be entered for some of

the climate functions, e.g., switching on/off, in-

tensity.

272

Climate control

CONTROLS

7. Set the desired temperature.

8. "OK"

Press the button.

Via iDrive:

Do not rapidly change between different tem-

perature settings. Otherwise, the automatic cli-

mate control will not have sufficient time to ad-

just the set temperature.

1. "CAR"

2. "Settings"

3. "Climate control"

4. "Heating/ventilation"

5. "A/C"

Temperature of the ventilation

General information

The temperature of the ventilation in the upper

body area can be adjusted.

Depending on the weather, the windshield and

the side windows may fog up briefly when

drive-ready state is switched on.

The air flow of the ventilation in the upper body

area heats or cools noticeably, depending on

the adjusted temperature.

Air conditioning is switched on automatically

with the AUTO program.

When using the cooling mode, condensation

that will exit below the vehicle.

This does not change the set interior tempera-

ture for the driver and front passenger.

Maximum cooling

Adjust temperature of the ventilation

1. "CAR"

Principle

2. "Settings"

The system is set to the lowest temperature,

optimum air flow and recirculated-air mode

with the drive-ready state switched on.

3. "Climate control"

4. "Heating/ventilation"

5. "Temperature adjustment"

6. Set the desired temperature.

Functional requirement

The function is available at an outside temper-

ature above approx. 32 ℉/0 ℃ and with the

drive-ready state switched on.

The temperature is individually adjusted, e.g.

colder toward blue, warmer toward red.

Switching maximum cooling on/off

Air conditioning

Press the button.

Principle

The LED is illuminated when maxi-

mum cooling is switched on.

The air in the interior will be cooled and dehu-

midified and, depending on the temperature

setting, warmed again.

Air flows out of the air vents to the upper body

area. The air vents need to be open for this.

Functional requirement

The interior can only be cooled with the drive-

ready state switched on.

The air flow can be adjusted with the program

active.

Switch air conditioning on/off

Using the button:

273

Climate control

CONTROLS

Adjusting the intensity of the air flow

AUTO program

With the AUTO program switched on, the in-

tensity can be adjusted. This changes the au-

tomatic control for the air mass.

Principle

The AUTO program cools, ventilates or heats

the car's interior automatically.

Using the button:

The air distribution and the temperature are

controlled automatically depending on the in-

terior temperature and the desired tempera-

ture setting including the selected intensity of

the air flow.

Press the lower or upper side of the

button: decrease or increase intensity.

Via iDrive:

1. "CAR"

2. "Settings"

Switching the AUTO program on/off

3. "Climate control"

4. "Heating/ventilation"

5. "Driver"

Using the button:

Press the button.

The LED of the button is illuminated

with the AUTO program switched on.

6. "Level"

7. Set the desired intensity.

Via iDrive:

The selected intensity is shown on the climate

control display.

1. "CAR"

2. "Settings"

Automatic recirculated-air control

3. "Climate control"

4. "Heating/ventilation"

5. "Driver"

Principle

The automatic recirculated-air control recog-

nizes pollutants in the outside air. The outside

air supply is shut off and the interior air is recir-

culated.

6. "Automatic"

Depending on the selected settings and out-

side influences, the air is directed to the wind-

shield, side windows, upper body, and into the

footwell.

General information

Point the side air vents toward the side win-

dows.

If the system is activated, a sensor detects

pollutants in the outside air and controls the

shut-off automatically.

The air conditioning is switched on with the

AUTO program.

If the system is deactivated, outside air contin-

uously flows into the interior.

At the same time, a condensation sensor con-

trols the program so as to prevent window

condensation as much as possible.

With constant air recirculation mode, the air

quality in the interior deteriorates and window

fogging increases.

The AUTO program is switched off automati-

cally, when manual air distribution is set.

If there is window condensation, switch off re-

circulated-air mode or defog the windows.

274

Climate control

CONTROLS

If there is window condensation, switch off re-

circulated-air mode or defog the windows.

Switching automatic recirculated-air

control on/off

1. "CAR"

Air flow, manual

2. "Settings"

3. "Climate control"

4. "Air quality"

5. "Automatic"

Principle

The air flow for air conditioning can be ad-

justed manually.

General information

Air recirculation mode

To adjust the air flow manually switch off

AUTO program first.

Principle

You may react to unpleasant odors or pollu-

tants in the immediate environment by tempo-

rarily suspending the supply of outside air. The

system then recirculates the interior air.

Adjusting the air flow manually

Press the lower or upper side of the

button: decrease or increase air flow.

When recirculated-air mode is switched off,

fresh air is directed into the vehicle's interior.

The selected air flow is shown on the climate

control display.

Switch air recirculation on/off

Using the button:

The air flow may be reduced to preserve the

vehicle battery.

Press the button.

Manual air distribution

The LED of the button is illuminated

when the air-recirculation mode is switched

on.

Principle

The air distribution for air conditioning can be

adjusted manually.

Via iDrive:

1. "CAR"

Adjusting the air distribution manually

2. "Settings"

Press the button repeatedly. Select

the desired setting:

3. "Climate control"

4. "Air quality"

▷

Windows, upper body area, and footwell.

Upper body area and footwell.

Footwell.

5. Select the desired setting:

▷

"Air recirculation"

"Fresh air"

Windows and footwell.

Windows.

To prevent window condensation, recirculated-

air mode switches off automatically after a cer-

tain amount of time, depending on the envi-

ronmental conditions.

Windows and upper body area.

Upper body area.

With constant air recirculation mode, the air

quality in the interior deteriorates and window

fogging increases.

The selected air distribution is shown on the

climate control display.

275

Climate control

CONTROLS

SYNC program

Rear window defroster

Principle

The Sync program can be used to apply the

settings on the driver's side to the passenger’s

side.

Ice and condensation are removed from the

rear window quickly.

Functional requirement

The function is operational when the drive-

ready state is switched on.

Switching the SYNC program on/off

1. "CAR"

2. "Settings"

Switching rear window defroster on/off

3. "Climate control"

4. "Synchronize"

Press the button. The LED is illu-

minated with rear window defroster

switched on.

The following settings of the driver's side can

be transferred to the passenger's side:

The rear window defroster switches off auto-

matically after a certain period of time.

▷

Temperature.

Air flow.

Air distribution.

AUTO program.

Ventilation

The program is switched off automatically if

the settings on the front passenger side are

changed.

Principle

The air flow directions can be adjusted individ-

ually for direct or indirect ventilation.

Defrost function

Setting the ventilation

Principle

Ice and condensation are quickly removed

from the windshield and the front side win-

dows.

General information

Open the air vents and position them to ensure

effective air conditioning.

Switching the Defrost function on/off

Direct ventilation

The air flow is directed towards the passen-

gers. The air flow heats or cools noticeably,

depending on the adjusted temperature.

Press the button.

The LED of the button is illuminated

when the system is switched on.

The air flow can be adjusted manually with the

system switched on.

Indirect ventilation

The air flow is not directed towards the pas-

sengers. The vehicle interior is warmed or

cooled indirectly, depending on the set tem-

perature.

If there is window condensation, switch on the

AUTO program or the air conditioning to utilize

the condensation sensor. Make sure that air

can flow to the windshield.

276

Climate control

CONTROLS

Front ventilation

Rear automatic climate

control

Overview

Buttons in the vehicle

▷

Lever for changing the airflow direction, ar-

rows 1.

Knurled wheel for variable opening and

closing of the air vents, arrows 2.

Ventilation in rear, center

Climate control functions

Button

Function

Temperature.

AUTO program.

Air distribution, manual.

Seat heating, refer to page 126.

Switching off.

▷

Lever for changing the airflow direction, ar-

rows 1.

Knurled wheel for variable opening and

closing of the air vents, arrow 2.

Switching climate control functions

on/off

Functional requirement

The rear automatic climate control is not ready

for operation if the automatic climate control is

switched off or if the function for defrosting the

windows and removing condensation is active.

277

Climate control

CONTROLS

The selected temperature is shown on the cli-

mate control display.

Switching on/off using iDrive

1. "CAR"

Do not rapidly switch between different tem-

perature settings. Otherwise, the automatic cli-

mate control will not have sufficient time to ad-

just the set temperature.

2. "Settings"

3. "Climate control"

4. "Heating/ventilation"

5. "Second row of seats"

6. "Activate heating/cooling"

AUTO program

Principle

Switching on using the button

The air flow, air distribution and the tempera-

ture are controlled automatically.

Press one of the following buttons:

▷

Temperature.

AUTO program.

Switching the AUTO program on/off

Using the button:

Air distribution, manual.

Press the button.

Switching off using the button

The LED of the button is illuminated

with the AUTO program switched on.

Press the button.

Via iDrive:

Temperature

1. "CAR"

2. "Settings"

Principle

3. "Climate control"

4. "Heating/ventilation"

5. "Second row of seats"

6. "Automatic"

The automatic climate control cools or heats

to the configured temperature and then keeps

the temperature constant.

Setting the temperature

Using the button:

Depending on the selected settings and out-

side influences, the air is directed to the upper

body and into the floor area.

Press the left or right button side to

set the desired temperature.

Manual air distribution

Via iDrive:

Principle

1. "CAR"

2. "Settings"

The air distribution for air conditioning can be

adjusted manually.

3. "Climate control"

4. "Heating/ventilation"

5. "Second row of seats"

6. "Temperature:"

7. Set the desired temperature.

Adjusting the air distribution manually

Press the button repeatedly. Select

the desired setting:

278

Climate control

CONTROLS

▷

Upper body area.

Upper body area and footwell.

Footwell.

If pre-ventilation is switched on, the vehicle

battery will be discharged. Thus, limit the

maximum activation time to save the vehi-

cle battery. The system will be available

again after the engine is started or after a

short trip.

Locking the operating elements

▷

Make sure that the vehicle's date and time

are set correctly.

Principle

The operating elements of the rear automatic

climate control can be disabled.

Open the air vents to allow air to flow out.

Switching on/off directly

Activate/deactivate

1. "CAR"

General information

There are different ways to switch the system

on or off.

2. "Settings"

3. "Climate control"

4. "Heating/ventilation"

5. "Second row of seats"

6. "Disable controller"

The system switches off automatically after a

certain period of time. The system continues to

run for some time after being switched off.

Using the button

Pre-ventilation

Functional requirement

When the vehicle is in standby state, the pre-

ventilation can be switched on or off with the

automatic climate control buttons.

Principle

The car's interior can be cooled or heated

before driving off with the pre-ventilation. De-

pending on set temperature and ambient tem-

perature, the car's interior is ventilated or pos-

sibly heated using the residual engine heat.

Turning on

Press one of the following buttons:

▷

Temperature.

Air conditioning.

General information

The system can be switched on and off directly

or via a preset departure time.

Maximum cooling.

AUTO program.

The activation time is determined based on

the outside temperature. The system promptly

switches on before the selected departure

time.

Air recirculation mode.

Upper side of the air flow, manual button.

Air distribution, manual.

Defrosting the windshield

Functional requirements

Turning off

Press and hold the bottom button.

▷

The vehicle is in idle state or standby state

and not in drive-ready state.

▷

The vehicle battery is sufficiently charged.

279

Climate control

CONTROLS

The system switches off after leaving and lock-

ing the vehicle.

Departure time

Principle

Via iDrive

Different departure times can be set to ensure

a comfortable interior temperature in the vehi-

cle at the time of departure.

Turning on

1. "CAR"

▷

One-time departure time: the time can be

set.

2. "Settings"

3. "Climate control"

4. "Pre-ventilation"

5. "Start now"

The system is switched on once.

▷

Departure time with weekday: time and day

of the week can be set.

On the desired weekdays, the system will

be switched on before the set departure

time.

Via BMW display key

Turning on

The departure time is preselected in two steps:

1. Switch on the display of the BMW display

key.

▷

Set departure times.

Activate departure times.

2. "Preconditioning setting"

A minimum of 10 minutes should pass be-

tween setting/activating the departure time

and the planned departure time to allow a suf-

ficient period of time for the air conditioning.

3. Tap the

icon or the

icon.

4. "Activate now"

5. "Start"

Setting the departure time

Turning off

1. Switch on the display of the BMW display

key.

Via iDrive

1. "CAR"

2. "Preconditioning setting"

2. "Settings"

3. Tap the

4. "Stop"

icon or the

icon.

3. "Climate control"

4. "Pre-ventilation"

5. "Departure plan"

6. Select the desired departure time.

7. Set the departure time.

8. Select day of the week, if needed.

9. "OK"

Display

Icon

Description

Icon on the climate control

display.

Flashing: the pre-ventila-

tion is switched on.

Via BMW display key

1. Switch on the display of the BMW display

key.

2. "Preconditioning setting"

3. Tap the

icon or the

icon.

280

Climate control

CONTROLS

4. Select the desired departure time.

5. Set the departure time.

6. Select day of the week, if needed.

7. "OK"

ternal, and set temperature. Snow and ice may

be removed more easily.

The system starts the engine automatically

and allows it to run for a limited period of time.

Safety information

Activating the departure time

Functional requirement

DANGER

To switch on the pre-ventilation automatically

at the departure time, the departure time must

be activated first.

If the exhaust pipe is blocked or ventilation

is insufficient, harmful exhaust gases can pol-

lute the area in and around the vehicle or

penetrate the vehicle. The exhaust gases

contain pollutants which are colorless and

odorless. In enclosed areas or areas with in-

sufficient ventilation, exhaust gases can also

accumulate outside of the vehicle. There is a

danger to life. Keep the exhaust pipe free and

ensure sufficient ventilation. Do not switch on

pre-conditioning in enclosed areas or areas

with insufficient ventilation, e.g. in enclosed

garages.

Via iDrive

1. "CAR"

2. "Settings"

3. "Climate control"

4. "Pre-ventilation"

5. "Departure plan"

6. Activate the desired departure time.

Via BMW display key

1. Switch on the display of the BMW display

key.

Warning

When pre-conditioning is in operation, high

temperatures can occur underneath the

body, for instance caused by the exhaust

system. If combustible materials such as

leaves or grass come in contact with hot

parts of the exhaust system, these materials

can ignite. There is a risk of fire, injury, and

property damage. Make sure that no com-

bustible materials can come in contact with

hot vehicle parts during pre-conditioning, e.g.

leaves, grass, natural gas, gasoline, oil or

other combustible objects.

2. "Preconditioning setting"

3. Tap the

icon or the

icon.

4. Tap on the icon.

5. Activate the desired departure time.

Display

,

Icon on the climate control display

signals an activated departure time.

Pre-conditioning through

Remote Engine Start

Functional requirements

▷

The vehicle is in idle state or standby state

and not in drive-ready state.

Principle

Pre-conditioning cools or heats the car's inte-

rior prior to start of the trip to a comfortable

temperature. The system automatically cools,

vents, and heats depending on the interior, ex-

▷

Battery is sufficiently charged.

For reasons of safety, the system can only

be switched on twice consecutively. The

281

Climate control

CONTROLS

system will be available again as soon as

the drive-ready state is activated and deac-

tivated again.

Switching on/off via vehicle key

The system can be switched on and off using

the vehicle key.

▷

The fuel tank capacity is sufficient.

Hood is closed.

Press the button on the vehicle key three

times within 1 second.

Make sure that the vehicle's date and time

are set correctly.

After operating the vehicle key, it will take

approximately 3 seconds until the engine is

switched on.

▷

Air vents are opened.

To switch off the system, press the button

again three times.

Enabling the automatic engine start

function

The automatic engine start must be enabled

once before using the system. Otherwise, the

engine cannot switch on automatically to cli-

matize the car's interior.

Switching on via BMW display key

1. Switch on the display of the BMW display

key.

2. "Preconditioning setting"

Via iDrive:

3.

Tap on the icon.

1. "CAR"

4. "Activate now"

5. "Start"

2. "Settings"

3. "Climate control"

4. "Preconditioning/ventilation"

5. "Remote Engine Start"

6. "Starting engine for clim. control"

7. Confirm the disclaimer.

Switching off via BMW display key

1. Switch on the display of the BMW display

key.

2. "Preconditioning setting"

3.

Tap on the icon.

Switching on/off directly

4. "Stop"

General information

The system switches off automatically after

approx. 15 minutes.

Switching off with the Start/Stop

button

The system can be switched off directly as fol-

lows: pressing the Start/Stop button, without

depressing the brake pedal.

For reasons of safety, the system can only be

switched on twice consecutively. The system

will be available again as soon as the drive-

ready state is activated and deactivated again.

Switching on via departure time

Switching on via iDrive

1. "CAR"

General information

Scheduled departure times can be set up in

the system to ensure a comfortable interior

temperature in the vehicle at the time of depar-

ture.

2. "Settings"

3. "Climate control"

4. "Preconditioning/ventilation"

5. "Start now"

▷

One-time departure time: the time of the

scheduled departure can be set.

282

Climate control

CONTROLS

The system is switched on once.

4. Select the desired departure time.

5. Set the departure time.

6. Select day of the week, if needed.

7. "OK"

▷

Departure time with weekday: time and day

of the week of the scheduled departure can

be set.

The departure time is preselected in two steps:

▷

Set departure times.

Activating the departure time via iDrive

1. "CAR"

Activate departure times.

The climate control function will start approx-

imately 10 minutes before the set departure

time and continue for approximately 5 more

minutes after the departure time.

2. "Settings"

3. "Climate control"

4. "Preconditioning/ventilation"

5. "Departure plan"

A minimum of 10 minutes should pass be-

tween setting/activating the departure time

and the planned departure time to allow a suf-

ficient period of time for the air conditioning.

6. Activate the desired departure time.

Activating the departure time via BMW

display key

1. Switch on the display of the BMW display

key.

For reasons of safety, the system can only be

switched on once. The system will be available

again as soon as the drive-ready state is acti-

vated and deactivated again.

2. "Preconditioning setting"

Observe the information about the intended

use of the vehicle.

3.

Tap on the icon.

4. Activating the desired departure time:

Tap on the icon.

Additional information:

For Your Own Safety, refer to page 9.

Display

Adjusting the departure time via iDrive

1. "CAR"

In the instrument cluster:

The engine runs for the purpose

of operating the pre-condition-

ing. The vehicle is not ready to

drive.

2. "Settings"

3. "Climate control"

4. "Preconditioning/ventilation"

5. "Departure plan"

The icon on the automatic climate

control signals an activated departure time.

6. Select the desired departure time.

7. Set the departure time.

8. Select day of the week, if needed.

The icon flashes while Remote Engine Start

is running.

Adjusting the departure time via BMW

display key

1. Switch on the display of the BMW display

key.

Confirmation signals from the

vehicle

The activation of the system is confirmed by

flashing twice.

2. "Preconditioning setting"

The parking lights are switched on as long as

the system is switched on.

3.

Tap on the icon.

283

Climate control

CONTROLS

Ionizer

Ambient air package

Principle

The Ambient Air Package cleans and scents

the interior air with selected fragrances.

The ionizer cleans the car's interior air of sus-

pended particles and improves the air quality.

Switching the ionizer on/off

1. "CAR"

General information

Two different fragrances can be selected in the

vehicle. A variety of other fragrances is possi-

ble by exchanging the fragrance cartridges.

2. "Settings"

3. "Climate control"

4. "Air quality"

The following criteria can influence the percep-

tion of scents in the vehicle interior:

5. "Ionization"

▷

Automatic climate control settings.

Temperature and moisture.

Time of day and season.

Fragrancing

General information

Fragrancing is done at intervals in order to

avoid a habituation effect.

Physical condition of the vehicle occupants,

for instance fatigue.

BMW recommends the use of genuine BMW

fragrance cartridges.

Two fragrance cartridges in the vehicle allow

switching between the fragrances.

The genuine BMW fragrance cartridges are not

suitable for refilling. When a cartridge is empty,

replace it with a new fragrance cartridge.

The fragrance cartridges are located in the

glove compartment.

To ensure a pleasant fragrance inside of the

vehicle when starting the trip, fragrancing can

occur prior to the trip. The system is automati-

cally switched on with the pre-ventilation if fra-

grancing was switched on at the completion of

the last trip.

Safety information

Warning

Refilled genuine BMW fragrance cartridges

can cause the emission of harmful substan-

ces, malfunctions, and damage to the sys-

tem. There is a risk of injury and risk of

property damage. Do not refill genuine fra-

grance cartridges. When a cartridge is empty,

replace it with a new fragrance cartridge.

Functional requirements

▷

The fragrance cartridges are sufficiently fil-

led.

The interior temperature is be-

tween 41 ℉/+5 ℃ and 104 ℉/+40 ℃.

Open the air vents to allow the fragrance to

flow out.

Opening the Climate menu

Press the button.

Selecting the fragrance

The car's interior is fragranced depending on

the selected fragrance.

The Climate comfort menu is displayed.

Individual settings can be entered for some of

the climate control functions.

284

Climate control

CONTROLS

Two different fragrances can be selected in the

vehicle.

The cartridge holder slides down.

1. "CAR"

2. "Settings"

3. "Climate control"

4. "Fragrance"

5. Select the desired fragrance.

Switching fragrancing on/off, adjusting

intensity

1. "CAR"

3. Remove the cover of the fragrance car-

tridge. Hold the cover on the top to slide

it from the fragrance cartridge.

2. "Settings"

3. "Climate control"

4. "Fragrance"

5. "Level"

6. Select the desired setting.

Display

The illustrations on the control display show

the actual fill level of the fragrance cartridges.

4. Insert the removed cover on the rear of the

fragrance cartridge.

1. "CAR"

2. "Settings"

3. "Climate control"

4. "Fragrance"

When an empty fragrance cartridge is indi-

cated, the cartridge still contains a fluid carry-

ing the fragrance. However, it is not sufficient

for fragrancing.

When the fragrance cartridges are empty, a

Check Control message is displayed once.

Inserting fragrance cartridges

The fragrance cartridges are located in the

glove compartment.

1. Open the glove compartment.

Front passenger side glove compartment,

refer to page 296.

2. Press on the bottom of the cartridge holder.

285

Climate control

CONTROLS

5. Position fragrance cartridge such that the

chip faces away from the cartridge holder.

The cartridge holder slides down.

3. Pull desired fragrance cartridge from the

holder.

6. Slide the fragrance cartridge into the car-

tridge holder at a slight angle without ap-

plying pressure. The fragrance cartridge

is correctly positioned when the cartridge

holder can be closed.

Fragrance cartridge, arrow 1: first fragrance

indicated on the control display.

Fragrance cartridge, arrow 2: second fra-

grance indicated on the control display.

7. Push the cartridge holder up, until it en-

gages.

4. Pull desired fragrance cartridge from the

holder.

Make sure that no objects press against the

cartridge holder from below, otherwise the

function of the ambient air package could

be impacted.

8. Close the glove compartment.

Removing the fragrance cartridge

The fragrance cartridges are located in the

glove compartment.

1. Open the glove compartment.

Recycling

Front passenger side glove compartment,

refer to page 296.

Empty fragrance cartridges can be

taken to an authorized service center

or another qualified service center or

repair shop for recycling.

2. Press on the bottom of the cartridge holder.

286

CONTROLS -> Climate control for Your BMW X4 Suv Second Generation (2019-2025)

Related Topics

CONTROLS

Popular Owner Manuals

Latest Owner Manuals