In the event of a breakdown
Number plate lamp
Removing
Installing electrical accessories
Before ꢁtting other electrical equipment
or accessories to your vehicle, contact a
dealer or a qualiꢁed workshop.
Changing a fuse
Before changing a fuse:
► Identify the cause of the fault and ꢁx it.
► Switch oꢂ all power consumption.
► Immobilise the vehicle and switch oꢂ the
ignition.
► Identify the defective fuse using the current
allocation tables and diagrams.
To replace a fuse, it is essential to:
► Pull the fuse out of its housing and check the
state of its ꢁlament.
► Always replace the failed fuse with a fuse of
the same rating (same colour); use of a diꢂerent
rating may cause malfunctions - risk of ꢁre!
If the fault recurs soon after replacing a fuse,
The Manufacturer accepts no responsibility
for any costs incurred in repairing the vehicle
or for rectifying malfunctions resulting from
the installation of accessories not supplied
or not recommended by the Manufacturer
and not installed in accordance with its
recommendations, in particular when the
combined power consumption of all of the
additional equipment connected exceeds 10
milliamperes.
Accessing the fuses
have the electrical system checked by a dealer
or qualiꢁed workshop.
► Lie down behind the vehicle in the middle of
the rear bumper.
► Pass your arm behind the bumper to reach
the lamp above the foam shock absorber.
► Pinch the ꢁxing clip holding the lamp.
► Push the lamp down while holding the ꢁxing
clip.
Good
Faulty
► Disconnect the lamp from its wiring loom.
► Leave the wiring loom dangling through the
bumper.
The fuse allocation tables and
corresponding diagrams are available
through a dealer or qualiꢁed workshop.
Replacement with a fuse not shown in the
allocation tables could cause a serious
malfunction of the vehicle. Consult a dealer or
qualiꢁed workshop.
Reꢀtting
► Connect the new lamp to the suspended
wiring loom.
► Replace the lamp into its housing by pressing
it until it clips into place.
► Turn both ꢁxing screws a quarter turn.
► Unclip the access cover.
► Pull out the faulty fuse and replace it.
28
English 