Safety
deꢁned by the Manufacturer will result in the
suspension of the commercial warranty.
Safety - General
recommendations
Seat belts
The seat belts are equipped with an inertia reel
which allows the strap length to automatically
adjust to your shape. The seat belt returns to its
storage automatically when it is not used.
The inertia reels are ꢁtted with a device which
automatically locks the strap in the event of a
collision, emergency braking or if the vehicle rolls
over. It can be released by pulling the strap ꢁrmly
and then releasing it so that it reels in slightly.
5
Do not remove the labels attached in
diꢀerent places on your vehicle. They
include safety warnings as well as
Hazard warning lamps
identiꢁcation information for the vehicle.
For any work on your vehicle, use a
qualiꢁed workshop that has the technical
information, skills and equipment required, all
of which a dealer or qualiꢁed workshop is
able to provide.
Fastening
► Pull the strap, then insert the tongue into the
buckle.
► Check that the seat belt is fastened correctly
by pulling on the strap.
► Pressing this button causes all the direction
indicators to ꢂash.
Depending on national regulations,
certain safety equipment may be
mandatory: high visibility safety vests,
warning triangles, breathalysers, spare bulbs,
spare fuses, ꢁre extinguisher, ꢁrst aid kit, etc.
Horn
They can operate with the ignition oꢀ.
Unlocking
► Press the red button on the buckle.
► Guide the seat belt as it is reeled in.
Advice
Installing equipment and accessories
Fitting electrical equipment or
The driver must ensure that the
passenger uses the seat belt correctly
and that it is securely fastened before setting
oꢀ.
The driver or passenger must always fasten
their seatbelt even for short journeys.
Before and after use, ensure that the seat belt
is reeled in correctly.
accessories not approved by the
Manufacturer may cause excessive power
consumption and faults in your vehicle's
electrical system. Contact a dealer or
qualiꢁed workshop for information on the
range of approved accessories.
Any modiꢁcation or adaptation not intended or
authorised by the Manufacturer or carried out
without meeting the technical requirements
► Press the button located on the end of the
multifunction control stalk.
15
English 