VEHICLE DIAGNOSTICS
Each press of the button, located at the end
of the wipers stalk, permits displaying of the different
trip computer data in succession, depending on the
display.
A few definitions
Range: Displays the distance which can be travelled with the remaining fuel
detected in the tank, in relation to the average consumption over the last few
miles (kilometres).
DISPLAY A
DISPLAY C
This displayed value may vary significantly following a change in the vehicle
speed or the relief of the route.
When the range falls below 20 miles (30 km), dashes are displayed. After
filling with at least 5 litres of fuel, the range is recalculated and is displayed
when it exceeds 60 miles (100 km).
NRJ
8
If, whilst driving, dashes are displayed continuously in place of digits, contact
a CITROËN dealer.
Each press displays in succession:
- Range,
- Current consumption
- Distance travelled,
- Average consumption,
- Average speed.
- the "vehicle" tab with:
ꢀ the range, the current consump
tion and the distance remaining
to the destination,
- the "1" tab (route 1) with:
ꢀ the average speed, the
average consumption and the
distance travelled calculated
over route "1"
Current consumption: only calculated and displayed above 20 mph
(30 km/h).
Average consumption: this is the average quantity of fuel consumed since
the last trip recorder zero reset.
Distance travelled: calculated since the last trip computer zero reset.
Distance remaining to the destination: calculated with reference to the
final destination, entered by the user. If guidance is activated, the navigation
system calculates it as a current value.
- the "2" tab (route 2) with the
same characteristics for a second
route.
Average speed: this is the average speed calculated since the last trip
computer zero reset (ignition on).
Zero reset
When the required route is displayed, press the control for more than
two seconds.
English 