Get SEATS Guide for Citroen Berlingo SUV First Generation (1996-2008)

Seats

Armrest

To access the vertical position, raise

the armrest until it locks.

Lower the armrest to put it back in the

position for use.

To remove the armrest, press the release

button from the vertical position and move

aside the armrest.

To put the armrest back in place, clip it

in the vertical position.

If the vehicle is ﬁtted with the additional

console and an armrest, to fold the

passenger seat to the table position

remove the console or the armrest.

Head restraint height adjustment

To raise the head restraint, slide it

vertically upwards.

To lower the head restraint, press the

button and slide the head restraint

vertically downwards.

The adjustment is correct when the upper

edge of the head restraint is level with the

top of the head.

To remove the head restraint, press

the button and pull the head restraint

upwards.

To re-install, engage the head restraint

rods in the holes, making sure they are

aligned with the seat back.

PASSENGER SEAT

The back of the individual passenger

seat can be folded to form a writing

table.

This position also permits the

transportation of long loads.

Never drive with the head

restraints removed; they must be

in place and correctly adjusted.

Folding the seat back

Pull the lever forwards then tilt the seat

back.

Returning the seat back to its

original position

Pull the lever forwards then raise the

seat back until it locks.

Seats

EXTENSO CAB

Centre seat

Storage compartment under the seat

cushion

Raise the centre seat cushion to gain

access to the storage compartment.

This space can be made secure by

ﬁtting a padlock (not supplied).

Mobile ofﬁce position

Pull the tab located on the lower edge

of the seat to lower the seat back

incorporating a writing table equipped

with a strap.

This is ﬁtted with a 3-point seat belt

with the seat belt return ﬁxed on the

load retaining ladder behind the driver.

To return the seat back to the upright

position, pull the tab and guide the seat

back until it locks.

During the operations, take care not to

trap the tab under the seat cushion.

Before locking the seat in the sitting

position, always take care to leave

the seat belt buckles visible and

the associated straps available for the

passengers.

3

Seats

Retracted position

Foldaway position

Side seat

Pull the tab located on the upper edge

of the seat by the head restraint to tilt

and guide the entire seat.

It inserts itself into the ﬂoor in the front

seat position and so forms a continuous

ﬂat ﬂoor with the load space.

This position permits the transportation

of long loads inside the vehicle, up to 3 m To return the seat to the sitting position,

(3.25 m in the case of the long versions)

with the doors closed.

In the retracted position, the maximum

weight on the seat back is 50 Kg.

Raise the yellow lever located at the

base of the seat to release and raise

the entire seat to the foldaway position

(seat cushion raised against the seat

back) until it locks.

This position permits the transportation

of high loads in the cab part.

The back of the side seat is ﬁtted with

a metal shell.

push the yellow lever located under the

seat cushion and lower the entire seat

until it is upright and locked on the ﬂoor

in the seat position.

To return the seat to the sitting position,

raise the seat back until it locks on the

ﬂoor in the seat position.

Seats

CONFIGURATIONS

Examples of various layouts combining comfort and practicality

The various operations

must be carried out while

stationary.

3

Practical information

Upper storage compartment

1. Lower glove box

2. Storage tray and bottle holder

(1.5 L)

This is located on the fascia, behind

the steering wheel.

A recess makes lifting of the lid easier

when opening. Guide it to its rest

position.

To close, guide the lid then press

the centre gently.

Any liquid which could spill risks

causing an electrical short circuit

and therefore a potential ﬁre.

An auxiliary socket is located in the

glove box (cable not supplied) for the

connection of portable equipment

(MP3 player, ...).

3. Side storage compartment

4. Bag hook

Only hang ﬂexible bags which are not

too heavy on this hook.

SEATS for Your Citroen Berlingo SUV First Generation (1996-2008)

Related Topics

Popular Owner Manuals

Latest Owner Manuals