Get VENTILATION Guide for Citroen Berlingo SUV First Generation (1996-2008)

Ventilation

DE-ICING AND DEMISTING

Manual mode

De-icing the rear screen and/

or mirrors

Pressing this button, with the

engine running, activates the

rapid demisting - de-icing of

the rear screen and/or electric

mirrors.

Direct the control to this air

distribution setting.

Press the air conditioning.

Returning to exterior air

intake open permits renewal

of the air in the passenger

compartment (diode off).

This function switches off:

Direct the control to this

temperature setting.

-

when the button is pressed,

when the engine is switched off,

automatically to prevent excessive

energy consumption.

Increase the air ﬂow setting.

3

Ventilation

When the engine is cold, to prevent

an excessive diffusion of cold air, the

air diffuser will reach its optimum level

gradually.

For your comfort, the settings are stored

when the ignition is switched off and are

reinstated the next time the vehicle

is started.

The automatic function will no longer

be maintained if you change a setting

manually (AUTO is cleared).

Driver or passenger side comfort

value

The value indicated on the display

corresponds to a level of comfort and

not a temperature in degrees Celsius

or Fahrenheit.

Turn this control to the left

or to the right to decrease or

increase the value. A setting

AUTOMATIC AIR CONDITIONING WITH SEPARATE ADJUSTMENTS

FOR THE DRIVER AND PASSENGER

around the value 21 provides

optimum comfort. However,

depending on your requirements, a

setting between 18 and 24 is usual.

Good practice

Automatic operation

For maximum cooling or heating of the

passenger compartment, it is possible

to exceed the value 15 by turning until

LO is displayed or the value 27

AUTO comfort programme

This is the normal air conditioning

system operating mode.

Do not cover the sunshine sensor

located on the fascia.

by turning until HI is displayed.

Press this button, the AUTO

symbol is displayed.

In accordance with the comfort

value selected, the system

controls the distribution, the

On entering the vehicle, the inside

temperature may be much colder (or

warmer) than is comfortable. There is

no advantage in changing the value

displayed in order to quickly reach the

level of comfort required. The system

will use its maximum performance

to reach the comfort value set.

ﬂow and the intake of air to guarantee

comfort and a sufﬁcient circulation of

air in the passenger compartment. No

further action on your part is required.

3

Ventilation

Air ﬂow

Intake of exterior air/

Recirculation of interior air

Press this button to

recirculate the interior air.

The recirculation symbol is

displayed.

Manual operation

Press the small fan button to

reduce the ﬂow or the large

fan button to increase the ﬂow.

You can, according to your

requirements, make a different selection

from that offered by the system by

changing a setting. The other functions

will still be controlled automatically.

Pressing the AUTO button restores fully

automatic operation.

On the display, the blades of the fan ﬁll

when the ﬂow is increased.

Recirculation prevents exterior odours

and smoke from entering the passenger

compartment. Avoid prolonged operation

in interior air recirculation mode (risk of

condensation, odour and humidity).

Pressing this button again activates the

intake of exterior air.

Air distribution

Deactivating the system

Pressing this button several

times in succession directs

the air ﬂow towards:

Press the air ﬂow small fan

button until the fan symbol

disappears from the display.

-

the windscreen,

This action deactivates all

of the system’s functions, with the

exception of the air recirculation and

rear screen demisting (if ﬁtted on your

vehicle). Your comfort setting is no

longer maintained and is switched off.

the windscreen and footwells,

the footwells,

the side vents, central vents and

Switching the air

conditioning On/Off

Press this button, the A/C

symbol is displayed and the

air conditioning is activated.

footwells,

-

the side vents and central vents.

For your comfort, do not deactivate the

system for long periods.

Pressing the large fan

button or the AUTO button

reactivates the system with

the values set before it was

deactivated.

Pressing this button again switches off

the air cooling.

The ventilation outlet, located in the

glove box, diffuses cool air (if the

air conditioning is on) regardless

of the reference temperature requested

in the passenger compartment and

regardless of the exterior temperature.

Ventilation

GOOD PRACTICE

Air conditioning

In all seasons, the air conditioning

should only be used with the windows

closed. However, if the interior

temperature remains high after a

prolonged period parked in the sun, do

not hesitate to ventilate the passenger

compartment for a few minutes.

Use the AUTO mode as much as

possible as it permits optimised

control of all of the functions: air ﬂow,

passenger compartment comfort

temperature, air distribution, air

intake mode or air recirculation in the

passenger compartment.

Operate the air conditioning system

for 5 to 10 minutes, once or twice a

month, to keep it in perfect working

order.

It is normal that the condensation

created by the air conditioning system

results in a ﬂow of water which may

form a puddle under the vehicle when

parked.

If the system does not produce cold air,

do not use it and contact a CITROËN

dealer.

Vents

"Leave them open"

For optimum distribution and diffusion

of hot or cool air in the passenger

compartment, there are adjustable

central and side vents which can

be directed sideways (right or left)

or vertically (up or down). For your

comfort while driving, do not close

them and direct the ﬂow of air towards

the windows instead.

Air vents in the footwells and directed

towards the windscreen complete the

equipment.

Do not block the vents located at the

windscreen or the air extractor located

in the boot.

Automatic mode: visibility

programme

Dust filter, odour filter

(activated carbon)

The comfort programme (AUTO) may

not be sufﬁcient to quickly demist or

de-ice the windows (humidity, several

passengers, ice).

In this case, select the visibility

programme. The visibility programme

indicator light comes on.

This ﬁlter traps certain dust and limits

odours.

Ensure that this ﬁlter is in good

condition and have all of the ﬁlter

elements replaced regularly.

It activates the air conditioning, the air

ﬂow and provides optimum distribution

of the ventilation to the windscreen and

side windows.

Refer to the "Checks" section of

chapter 7.

It deactivates the air recirculation.

Seats

3 - Driver’s seat height adjustment

To raise the seat, pull the handle upwards

then take your weight off the seat cushion.

1 - Forwards/backwards adjustment

Lift the bar and slide the seat forwards

or backwards.

To lower the seat, pull the handle

upwards then push on the seat

cushion.

FRONT SEATS

2 - Seat back angle adjustment

Depending on the version and

conﬁguration of your vehicle, different

front seats are ﬁtted, either:

With your back pressed against the seat

back, move the lever forward and set

the required angle.

-

a driver’s seat and a passenger

seat,

-

an individual driver’s seat

and a modular bench.

Depending on the models, the following

adjustments are available:

3

Seats

Armrest

To access the vertical position, raise

the armrest until it locks.

Lower the armrest to put it back in the

position for use.

To remove the armrest, press the release

button from the vertical position and move

aside the armrest.

To put the armrest back in place, clip it

in the vertical position.

If the vehicle is ﬁtted with the additional

console and an armrest, to fold the

passenger seat to the table position

remove the console or the armrest.

Head restraint height adjustment

To raise the head restraint, slide it

vertically upwards.

To lower the head restraint, press the

button and slide the head restraint

vertically downwards.

The adjustment is correct when the upper

edge of the head restraint is level with the

top of the head.

To remove the head restraint, press

the button and pull the head restraint

upwards.

To re-install, engage the head restraint

rods in the holes, making sure they are

aligned with the seat back.

PASSENGER SEAT

The back of the individual passenger

seat can be folded to form a writing

table.

This position also permits the

transportation of long loads.

Never drive with the head

restraints removed; they must be

in place and correctly adjusted.

Folding the seat back

Pull the lever forwards then tilt the seat

back.

Returning the seat back to its

original position

Pull the lever forwards then raise the

seat back until it locks.

VENTILATION for Your Citroen Berlingo SUV First Generation (1996-2008)

Related Topics

Popular Owner Manuals

Latest Owner Manuals